CM-2026-077 - 3/20/2026 SUPPLEMENTAL AGREEMENT NO. 1
TO "AGREEMENT BETWEEN THE CITY OF ROUND ROCK AND
BEYOND ENGINEERING AND TESTING FOR
CONSTRUCTION MATERIALS TESTING SERVICES"
CITY OF ROUND ROCK §
STATE OF TEXAS § KNOW ALL BY THESE PRESENTS:
COUNTY OF TRAVIS §
COUNTY OF WILLIAMSON §
THIS SUPPLEMENTAL AGREEMENT NO. 1 to "Agreement between the City of
Round Rock and Beyond Engineering Testing for Construction Materials Testing Services"
hereinafter called "Supplemental Agreement No. 1," is made by and between the CITY OF
ROUND ROCK, Texas, a home-rule municipality, with offices located at 221 East Main Street,
Round Rock Texas, 78664, hereinafter called the "City" and BEYOND ENGINEERING AND
TESTING, with offices located at 3801 Doris Lane, Suite B, Round Rock, Texas 78664,
hereinafter called the"Consultant."
WHEREAS, the City and Consultant previously executed the referenced "Agreement
between the City of Round Rock and Beyond Engineering and Testing for Construction
Materials Testing Services" for the McNeil Road Right Turn Lane Project, hereinafter called the
"Agreement;"and
WHEREAS,the City and Consultant desire to modify the Scope of Services; and
WHEREAS, the City and Consultant agree to add costs related to the modification of
services in the amount of$4,144.80; and
NOW THEREFORE, in consideration of the mutual promises and obligations in the
Agreement and this Supplemental Agreement No. 1, the City and Consultant agree that said
Agreement is amended and supplemented as follows:
I.
1.0 SCOPE OF SERVICES
All references to Exhibit"A" in the Agreement shall include the Addendum to Exhibit
"A" as part of the Scope of Services, attached hereto and incorporated herein by reference for all
purposes.
CM 201c0 - 011
II.
2.0. CONTRACT AMOUNT
This Supplemental Agreement No. 1 shall increase the total compensation set forth in
Section 4.0 of the Agreement by $4,144.80 for a not-to-exceed total of$7,938.70 for the term of
the Agreement.
III.
3.0 AMENDMENTS TO AGREEMENT
This Supplemental Agreement No. 1 shall amend the original Agreement only as set forth
herein with no other changes in terms or conditions of the original Agreement.
[Signatures on the following page.]
2
IN WITNESS WHEREOF, the City and Consultant have executed this Supplemental
Agreement to be effective as of the last date of due execution by both parties.
CITY OF ROUND ROCK,TEXAS BEYOND ENGINEERING AND
TESTING
By: :AIL ) ia"ser— 4/4"11 61"44,2grz—
By:
Printed Name: Wt (J 191;01M1`a^ Printed Name: Raphael Campos
Title: ATJAKt' CIA1 A1An409c( Title: Vice President
Date Signed: 3frid4.4 Date Signed: 03/11/2026
ATTEST:
By: bYkYl aid.
Ann Franklin, City Clerk
FOR CITY,APPROVED AS TO FORM:
By: ,r_ 2._G.^
Stephanie L. Sandre, City Attorney
3
Addendum to Exhibit "A"
Date: October24,2025 4,4 E YO N 0
Revised: February 17,2026 Engineering&Testing
www.BevondET.corn
Prepared By: Syed Uddin
Beyond Office: Round Rock Tx Scope of Work: Construction Materials Testing Estimate
Beyond Proposal No. C-250035-S/RT2512029
Construction Materials Testing and Observations:Flexbase and concrete testing-Supplemental Estimate
Project Name: McNeil Road RTL Material Testingg
Project Location: Round Rock,Texas
Client: City of Round Rock
Project Info. Construction of proposed right turn lane
Activity Invoice Name Est.Units Unit Fee Estimate Cost
Earthwork(FlexBaaa)
Field Technician,per hr. Soil Services 0 $70.00 $ 0.00
Sieve Analysis(Tex-110-E) Sieve Analysis 0 $95.00 $ 0.00
Atterberg Limits(Tex-104-6-E) Atterberg Limits 0 $96.00 $ 0.00
Bar Linear Shrinkage(Tex-107-E) Bar Linear Shrinkage 0 $78.00 $ 0.00
Moisture-Density Relationship(Tex-113/114-E) Moist Density 0 $255.00 $ 0.00
WetBall Mill Testn(Tex-116-E) WetBall Mill 0 $255.00 $ 0.00
Triaxial Test(Tex-117-E) Triaxial Test 0 $1,910.00 $ 0.00
Sample Pick Up(FlexBase)(Tex-400-A) Sample P/U 0 $140.00 $ 0.00
Round Trip Round Trip Charge 0 $70.00 $ 0.00
Nuclear Density Gauge,per day Equipment-Density Gauge 0 $65.00 $ 0.00
Subtotal $ 0.00
Concrete Testing
Field Technician,per hr. Concrete Services 25 $70.00 $ 1,750.00
Concrete Test Cylinders,ea.(Tex-418-A) Concrete Comp.Test 36 $23.00 $ 828.00
Grout Cubes Grout Cubes Compr.Test 0 $28.00 $ 0.00
Cylinder Pick Up(concrete) Cylinder P/U 5 $140.00 $ 700.00
Round Trip Round Trip Charge 7 $70.00 $ 490.00
Subtotal $ 3,768.00
Project Management and Report Preparation
Project Manager and Administration PM/Admininstration 10% $ 376.80
Total Estimated Cost $ 4,144.80
Comments/Notes:
This is an estimate only.Site visits are charged with a 4-hr minimum onsite time.For additional information pertaining to the charges,refer to Beyond's 2025 Schedule of Services and Fees.
www.BeyondET.com engineering beyond limits
Addendum to Exhibit "A"
www.BeyondET.com
9EYOND
2025 Schedule of Services and Fees — Central Texas
Geotechnical and Construction Materials Testing and Inspection
Geotechnical and CMT Professional Staff Rates
Principal Engineer (PE) $ 200 Hour
Senior Professional Engineer (PE) $ 170 Hour
Professional Engineer (PE) $ 150 Hour
Staff Engineer/EIT or Geologist $ 110 Hour
Structural Inspector, AWS/CWI (minimum 4-hr charge per trip) $ 100 Hour
Field Geotechnical Technician or Logger $ 78 Hour
Administrative Staff $ 60 Hour
CMT Technician $ 70 Hour
Hourly rates are charged portal to portal from Round Rock or Carrollton
office. Minimum charges are 4-hour per trip for all Construction Materials
Testing services, except for cylinder/sample retrieval.
Senior CMT Technician $ 78 Hour
Applies to Floor flatness/levelness, pier inspection, HMAC testing, rebar
inspection, post-tensioned cables and batch plant inspections. Hourly
rates are charged portal to portal from Round Rock or Carrollton office.
Minimum charges are 4-hour per trip.
Travel (field personnel/technician)
Round Trip Charge for Project within 50 miles of Beyond Round Rock $ 70.00 Each
or Carrollton Office (excluding tech travel time)
Trip Charge for Project over 50 miles from Beyond Office (excluding $ 0.70 Mile
tech travel time)
Per Diem /Lodging (when overnight stay is required) $ 150 Day
Miscellaneous Items (in addition to hourly rate)
Nuclear Density Gauge $ 65 Day
Static Cone Penetrometer or Dynamic Cone Penetrometer $ 100 Day
Ferroscan Equipment for Locating Rebar $ 250 Day
Concrete/HMAC Core Machine with Generator $ 300 Day
Core Bit Wear, per inch of thickness cored (4 to 6-inch dia. core) $ 6.00 Inch
Floor Flatness/Floor Level Equipment $ 250 Day
Moisture Transmission Test for Floor Slab $ 40 Each
Laboratory Testing Standard Fee Schedu Attached
Laboratory Testing Rush Charge Quotation
www.BeyondET.com engineering beyond limits
Addendum to Exhibit "A"
2025 Schedule of Services and Fees- Central Texas
Geotechnical and Construction Materials Testing and Inspection Page 2 of 2
BASIS OF CHARGES
1. If Client requires service before a contract is executed, Client agrees to limit the Consultant's
liability per Item 15 of Beyond's Professional Services Agreement(PSA).
2. Invoices will be issued on a monthly basis or upon completion of a project, whichever is
sooner. Beyond requires payment within 30 days (unless negotiated otherwise). If not paid
within terms per the Contract, the unpaid balance shall be subject to a finance charge of
1.5% per month, which is an ANNUAL PERCENTAGE RATE OF 18%.
3. A four-hour minimum applies for all field services. Projects local to Beyond Round Rock or
Carrollton office (within 50 miles radius) are billed a lump sum trip charge, plus tech time
portal to portal from Beyond office. Projects located more than 50 miles from Beyond office
are billed at the IRS mileage rate plus tech time during travel, plus on-site tech time.
4. Project management/administrative (PM/Admin) services include project management,
report preparation, report review, and report distribution. These PM/Admin items are not
billed hourly. To account for this PM/Admin effort, Beyond charges 15% of the total
field and laboratory costs. For example, when field and lab services are $100, PM/Admin
costs are an additional $15, for a total invoice of $115. If the above PM/Admin service is
not required, the 15% PM/Admin fee will not be charged by Beyond.
5. Overtime for hourly services is the base rate plus 35%. Overtime applies to weekday
work before 7AM and after 5PM, weekends, as well as work greater than 40 hours per week
per project. Work performed during a national holiday is billed at a rate of 2.0 times the
standard rate.
6. Per diem for overnight stays will be charged at a rate of $150.00 per day per person, or at
actual expenses whichever is greater.
7. Outside services and expenses include a 15% markup, unless otherwise noted.
www.BeyondET.com engineering beyond limits
Addendum to Exhibit "A"
3801 Doris Ln,Suite B,Round Rock,Texas 78664
E YO N AASHTO/CCRL/TxDOT Accredited Phone:512-358-6048
Engineering&Testing Certified DBE/MBE/HUB www.BeyondET.com
Geotechnical and Construction Materials Laboratory Testing
2025 Schedule of Fees and Services-Central Texas
A. Volume Change Tests E. Analytical Chemistry Testing
1. 1-D Consolidation(ASTM D2435),2.5"D 1. Sulfates Content in Soil&Aggregate
a. Maximum loading 58 ksf(<=14 loadings) $650 a. ion chromatography,EPA 300.0 or ASTM D4327 $66
b. Additional loading step(over 14 loadings),each $45 b Colorimetric method(TxDOT Tex-145-E) $99
c. Up to 128 ksf Loading Steps Quote 2. Chloride Content in Soil&Aggregate
2. 1-D Consol.w/CRS loading(ASTM D4186),2.5"D Quote a ion chromatography,EPA 300.0 or ASTM D4327 $66
3. 1-D Swell or Collapse of Soils(ASTM D4546) b. Chloride ion,wet method(Tex-620-J) $99
a. Method A,Multiple(4)Specimens $660 3. pH of Soil(ASTM D4972,G51,Tex-128-E) $39
b. Method B,Single Specimen $216
c. Method C,w/swell pressure&swell strain $320 F. Rock Strength Tests
4. Expansion Index(ASTM D4829) $330 1. Compressive Strength of Rock Core*(ASTM D7012)
a. Method A,triaxial test(Peak Load Only) $397
B. Strength Tests:Direct Shear(Intact/Remold,ASTM D3080) b. Method B,triaxial test(Young's modulus&Poisson's ratio) Quote
a. Consolidated-Drained,3 pts,Sand $495 c. Method C,unconfined,peak load Only,w/o ASTM D4543 $99
b. Consolidated-Drained,3 pts,Silt/Clay(<3 day shear) $685 d. Method D,unconfined,w/stress-strain,w/o ASTM D4543 $213
c. Post Peak Strength Parameters,per Test $30 e. add dimensional&shape tolerances(ASTM D4543) Quote
*Pricing is for NX(2.16 in.)or NQ(1.87 in.)rock cores ONLY.
C. Soil Strength Tests: Triaxial Compression 2. CERCHAR Abrasivity Index(ASTM D7625) $280
1. Unconfined Compression(ASTM D2166) 3. Splitting Tensile Strength-Brazilian Test(ASTM D3967) $190
a. Intact,2.8"D,per specimen $72 4. Slake Durability of Shales&Weak Rocks(ASTM D4644) $220
b. Remolded,2.8"D,per specimen $99
2. Unconsolidated-Undrained(UU)(ASTM D2850,Tex-118-E) G. Resilient Modulus Test**(AASHTO T307)
a. Intact,2.8"D,per specimen,<120 psi Cell Pressure $127 1. Fine-grained material,per sample(2.8"D) $780
b. Remolded,2.8"D,per specimen,<120 psi $155 2. Coarse-grained material,per sample(up to 4"D) $1,630
3. Consolidated-Undrained(CU R-bar)(ASTM D4767,Tex-131-E) **Client to provide Proctor,sieve analysis,Atterberg limits,
a. Intact,2.8"D,with pore pressure,3 pts $1,850 specific gravity to categorize the material as Type 1 or Type 2
b. Remolded,2.8"D,with pore pressure,3 pts $2,000 and define remolding parameters.
c. High Cell/Back Pressure(>120 psi,up to 450 psi) Quote
4. Multi-Stage CU R-bar test(ASTM D4767,modified) H. Thermal Resistivity Testing(ASTM D5334-22a/IEEE442-2017)
a. Intact,2.8"D,3 stages,with pore pressure $1,350 1. As-Rcv'd Dry-Out Curve,Intact,per Soil specimen $819
b. High Cell/Back Pressures(>120 psi,up to 450 psi) Quote 2. Dry-Out Curve,Remolded,2.8"D,per Soil specimen $819
5. Consolidated-Drained(CD test)(ASTM D7181) 3. Dry-Out Curve,Flowable Fill,4.0"D,per specimen $989
a. Intact,2.8"D,with volume change,3 pts $2,150 4. Field In-situ Thermal Resistivity Testing Quote
b. Remolded,2.8"D,with volume change,3 pts $2,300
c. Per pt.,per day,2.8"D(>3 days of consol&shearing) $130 I. Concrete Tests
6. Special Triaxial Shear(Triaxial Extension,Ko Consol.) Quote 1. Compressive Strength,ASTM C39,per Cylinder $23
7. Stress History&Normalized Soil Eng.Props(SHANSEP) Quote 2. Compressive Strength of Cored Specimen,ASTM C42 $60
(including Trimming and Sulfur Capping),each
D. Permeability Tests 3. Grout Prism Compression Strength,ASTM C1019 $28
1. Granular Soils,3"&4.5"D,constant head(ASTM D2434) $218 4. Mortar Compressive Strength,ASTM C109,per Cube $23
2. Hydraulic Conductivity(ASTM D5084,Method C or F) 5. Air Content of Concrete(pressure method),ASTM C231 $18
a. Intact,2.8"D,flexible-wall w/back pressure $270 6. Unit Weight or Bulk Density of Concrete,ASTM C138 $18
b. Intact,4"D,flexible-wall w/back pressure $295 7. Slump Test,ASTM C143(extras,no cylinders cast) $18
c. Remolded,2.8"D,flexible-wall w/back pressure $280 8. Concrete Cylinder Saw Cut or Cap(uneven cylinders) $28
The above rates are subject to change for specific test requirements,extra test duration,or rapid turn-around. 1 of 2
Addendum to Exhibit "A"
3801 Doris Ln,Suite B,Round Rock,Texas 78664
4E VO N AASHTO/CCRL/TxDOT Accredited Phone:512-358-6048
' Engineering&Testing Certified DBE/MBE/HUB www.BevondET.con
Geotechnical and Construction Materials Laboratory Testing
2025 Schedule of Fees and Services-Central Texas
J. Soil-Cement or Lime Mixtures 2. Modified Proctor-4 points
1. Moisture-Density of Soil-Cement Mixture(ASTM D558) $350 a. Method A or B(ASTM D1557) $219
2. Wetting&Drying Compacted Soil-Cement Mix(D559) $495 b. Method C(ASTM D1557) $266
3. Unconfined Compression Soil-Cement,per specimen 3. Oversize Particles Correction(ASTM D4718) $50
a. Method B,w/Curing(7 d)(ASTM D1633/D1632) $180 4. Base Material Compaction(Tex-113-E) $305
b. Curing(additional 7 days) $30 5. Subgrade&Backfill Compaction(Tex-114-E,Part I) $280
4. Soil-Cement/Lime Testing(Tex-120/121-E,Part I) $440 6. Subgrade&Backfill Compaction(Tex-114-E,Part II) $305
5. Soil-Cement/Lime Testing(Tex-120/121-E,Part II) $330 7. California Bearing Ratio(CBR)(ASTM D1883) $440
6. Soil-Lime pH Testing(Tex-121-E Pt III or ASTM D6276) $280
7. Admixing Lime to Reduce Plasticity of Soil(Tex-112-E) 8. TxDOT Triaxial Compression(Tex-117-E,Part II)including:
a. 4 Lime Percentage Points $550 a. Molding,Curing and Testing 6 to 9 Specimens(Tex-117-E) $1,910
b. Sieve Analysis(Tex-110-E,Part I) $95
K. Grain-Size&Aggregate Tests c. Atterberg Limits(Tex-104-E, 105-E, 106-E) $96
1. Sieve Analysis d. Bar Linear Shrinkage of Soils(Tex-107-E) $78
a. 3"-3/4"-#200(ASTM D6913/C136) $93 e. Moisture Density Relationship/Compaction(Tex-113-E) $305
b. 3/4"-#200(ASTM D6913) $79 f. Wet Ball Mill(Tex-116-E) $255
c. %Passing#200 sieve-Aggregate(ASTM C117) $58
d. %Passing#200 sieve-Soil(ASTM D1140/Tex-111-E) $48 M. Index Properties Tests
e. Hydrometer Test(D7928,mechanical sieving excluded) $132 1. Water Content(ASTM D2216,Tex-103-E) $12
f. Particle Analysis of Soil(TxDOT,Tex-110-E,Part I) $95 2. Water Content w/Density(ASTM D2216,2937&7263) $36
g. Particle Analysis of Soil(TxDOT,Tex-110-E,Part 1) $165 3. Plastic and Liquid Limits(ASTM D4318) $86
2. Organic Impurities(ASTM D2974 or Tex-408-A) $51 4. Plastic&Liquid Limits(Tex-104-E,105-E,106-E) $96
3. Carbonate Content(ASTM D3042 modified Method J&L) 5. Bar Linear Shrinkage of Soils(Tex-107-E) $78
a. Fine Aggregate(<3/4"Sieve) $315 6. Specific Gravity
b. Coarse Aggregate(>3/4"Sieve) $380 a. Soils(ASTM D854 or Tex-108-E) $83
4. Soundness Test(ASTM C88 or Tex-411-A) b. w/Absorption of Coarse aggregates(ASTM C127) $83
a. w/Magnesium Sulfate $380 c. w/Absorption of Fine aggregates(ASTM C128) $83
b. w/Sodium Sulfate Quote 7. Organic Content(ASTM D2974 Method C) $51
5. LA Abrasion Organic Content,UV-VIS Method C(Tex-148-E) $225
a. Small-Size Coarse Aggregate(ASTM C131 or Tex-410-A) $304 8. Rapid Carbonate Content(ASTM D4373) $143
b. Large-Size Coarse Aggregate(ASTM C535) $355 9. Soil Resistivity Test(ASTM G57,G187,Tex-129-E)
6. Wet Ball Mill of Flexible Base(Tex-116-E) $255 a. Miller Box for mini.resistivity $129
7. Aggregate Durability Index(AASHTO T 210) b. additional(i.e.oven dry or saturated)test $60
a. Fine Aggregate(Passing No.4 Sieve) $201 10. Crumb Test,2 pts per soil&6 hrs(ASTM D6572) $45
b. Coarse Aggregate(Retaining No.4 Sieve) $216 11. Pinhole Dispersion(ASTM D4647) $310
8. Crushed Face Count (Tex-460-A Part 1;ASTM D5821) $76 12. Double Hydrometer/Dispersion(ASTM D4221) $250
9. Sand Equivalent Test(ASTM D2419 or Tex-203-F) $128
10. Clay Lumps&Friable Particles(Tex-413-A/ASTM C142) $99 N. Sample Preparation&Extrusion
11. Flat&Elongated Particles,ASTM D4791 or Tex-280-F $131 1. Hand-trimmed specimen(reducing diameter)
12. Unit Weight/Bulk Density(Loose/Rodded),ASTM C29 $43 a. UC/UU/CU Test Specimen,2"or 2.4"dia. $59
b. Permeability Test Specimen,2"or 2.4"dia. $45
L. Water Content/Density(Unit Weight)Relationship 2. Pocket Penetrometer,per sample $7
1. Standard Proctor-4 points 3. Pocket Vane Shear,per sample $10
a. Method A or B(ASTM D698) $199 4. Damaged Shelby tube extrusion $45
b. Method C(ASTM D698) $225 5. Lab Labor Rate(PE/EIT/Tech):$150/$110/$70 per Hour.
The above rates are subject to change for specific test requirements,extra test duration,or rapid turn-around. 2 of 2