Contract - Chemtrade Chemicals, Inc. - 2/9/2017 CITY OF ROUND ROCK AGREEMENT
FOR PURCHASE OF WATER TREATMENT CHEMICALS
FROM
CHEMTRADE CHEMICALS INC.
THE STATE OF TEXAS §
CITY OF ROUND ROCK §
§ KNOW ALL BY THESE PRESENTS:
COUNTY OF WILLIAMSON §
COUNTY OF TRAVIS §
That this Agreement for purchase of aluminum chlorohydrate and liquid ammonium
sulfate, and for related go ds and services, referred to herein as the "Agreement," is made and
entered into on this the day of the month of Q 20 29+6;by and between the
CITY OF ROUND ROCK, TEXAS, a home-rule municipals whose offices are located at 221
East Main Street, Round Rock, Texas 78664, referred to herein as the "City," and
CHEMTRADE CHEMICALS, INC., whose offices are located at 155 Gordon Baker Road, Suite
300, Toronto, Ontario, Canada M2H3N5, referred to herein as the "Vendor." This Agreement
supersedes and replaces any previous agreements between the named parties, whether oral or
written, and whether or not established by custom and practice.
RECITALS:
WHEREAS, City desires to purchase aluminum chlorohydrate and liquid ammonium
sulfate, and associated goods and services, and City desires to purchase same from Vendor; and
WHEREAS, City has issued its "Invitation for Bid" for the provision of said goods, and
City has selected the bid submitted by Vendor; and
WHEREAS, the parties desire to enter into this Agreement to set forth in writing their
respective rights, duties, and obligations;
NOW, THEREFORE,WITNESSETH:
That for and in consideration of the mutual promises contained herein and other good and
valuable consideration, the receipt and sufficiency of which are hereby acknowledged,the parties
mutually agree as follows:
1.01 DEFINITIONS
A. Agreement means the binding legal contract between City and Vendor whereby
City is obligated to buy specified goods and Vendor is obligated to sell same. The Agreement
includes the following: (a) City's Invitation for Bid designated IFB 11-024; Specification
Number 16-013 dated August 2016; and Addendum No. 1 dated August 29, 2016; (b) Vendor's
Response to IFB; (c) contract award; and (d) any exhibits, addenda, and/or amendments thereto.
Any inconsistencies or conflicts in the contract documents shall be resolved by giving preference
00369341/ss2
in the following order:
(1) This Agreement;
(2) Purchaser's Response to IFB;
(3) City's Invitation for Bids, exhibits, and attachments.
B. City means the City of Round Rock, Williamson and Travis Counties, Texas.
C. Effective Date means the date upon which the binding signatures of both parties
to this Agreement are affixed.
D. Force Majeure means acts of God, strikes, lockouts, or other industrial
disturbances, acts of the public enemy, orders of any kind from the government of the United
States or the State of Texas or any civil or military authority, insurrections, riots, epidemics,
landslides, lightning, earthquakes, fires, hurricanes, storms, floods, restraint of the government
and the people, civil disturbances, explosions, or other causes not reasonably within the control
of the party claiming such inability.
E. Goods mean the specified supplies,materials, commodities,or equipment.
F. Vendor means Chemtrade Chemicals, Inc., or any of its successors or assigns.
2.01 EFFECTIVE DATE,INITIAL TERM,AND ALLOWABLE RENEWALS
A. This Agreement shall be effective on the date it has been signed by both parties
hereto, and shall remain in full force and effect unless and until it expires by operation of the
term stated herein, or until terminated or extended as provided herein.
hereof. B. The term of this Agreement shall be for sixty(60) months from the effective date
C. City reserves the right to review the relationship at any time, and may elect to
terminate this Agreement with or without cause or may elect to continue.
3.01 CONTRACT DOCUMENTS AND EXHIBITS
City selected Vendor to supply certain goods as outlined in IFB 16-013, Specification
Number 885-16, dated August 2016, and Addendum No. 1 dated August 29, 2016. The goods
which are the subject matter of this Agreement are described in Exhibit "A" and, together with
this Agreement, comprise the total Agreement and they are fully a part of this Agreement as if
repeated herein in full.
4.01 ITEMS AWARDED
Only the following IFB line items on Exhibit "A" are awarded to the Vendor: item #5,
aluminum chlorohydrate; and item#10 liquid ammonium sulfate.
2
1
5.01 COSTS
The City shall pay to Vendor the bid costs listed on pages twenty-four (24) and twenty-
five(25) of Exhibit"A,"which are specifically relevant to the referenced bid items#5 and#10.
6.01 INVOICES
All invoices shall include, at a minimum, the following information:
A. Name and address of Vendor;
B. Purchase Order Number;
C. Description and quantity of items received; and
D. Delivery dates.
7.01 INTERLOCAL COOPERATIVE CONTRACTING/PURCHASING
Authority for local governments to contract with one another to perform certain
governmental functions and services, including but not limited to purchasing functions, is
granted under Government Code, Title 7, Chapter 791, Interlocal Cooperation Contracts,
Subchapter B and Subchapter C, and Local Government Code, Title 8, Chapter 271, Subchapter
F, Section 271.101 and Section 271.102.
Other governmental entities within the State of Texas may be extended the opportunity to
purchase off of the City of Round Rock's bid, with the consent and agreement of the successful
vendor(s) and Round Rock. Such agreement shall be conclusively inferred for the vendor from
lack of exception to this clause in the vendor's response. However, all parties hereby expressly
agree that the City of Round Rock is not an agent of,partner to, or representative of those outside
agencies or entities and that the City of Round Rock is not obligated or liable for any action or
debts that may arise out of such independently-negotiated "piggyback"procurements.
8.01 NON-APPROPRIATION AND FISCAL FUNDING
This Agreement is a commitment of City's current revenues only. It is understood and
agreed that City shall have the right to terminate this Agreement at the end of any City fiscal year
if the governing body of City does not appropriate funds sufficient to purchase the services as
determined by City's budget for the fiscal year in question. City may effect such termination by
giving Vendor a written notice of termination at the end of its then-current fiscal year.
9.01 PROMPT PAYMENT POLICY
In accordance with Chapter 2251, V.T.C.A., Texas Government Code, any payment to be
made by City to Vendor will be made within thirty (30) days of the date City receives goods
under this Agreement, the date the performance of the services under this Agreement are
3
completed, or the date City receives a correct invoice for the goods or services, whichever is
later. Vendor may charge interest on an overdue payment at the "rate in effect" on September 1
of the fiscal year in which the payment becomes overdue, in accordance with V.T.C.A., Texas
Government Code, Section 2251.025(b). This Prompt Payment Policy does not apply to
payments made by City in the event:
A. There is a bona fide dispute between City and Vendor, a contractor,
subcontractor, or supplier about the goods delivered or the service performed that
causes the payment to be late; or
B. There is a bona fide dispute between Vendor and a subcontractor or between a
subcontractor and its supplier about the goods delivered or the service performed
that causes the payment to be late; or
C. The terms of a federal contract, grant, regulation, or statute prevent City from
making a timely payment with federal funds; or
D. The invoice is not mailed to City in strict accordance with any instruction on the
purchase order relating to the payment.
10.01 GRATUITIES AND BRIBES
City may, by written notice to Vendor, cancel this Agreement without incurring any
liability to Vendor if it is determined by City that gratuities or bribes in the form of
entertainment, gifts, or otherwise were offered or given by Vendor or its agents or
representatives to any City officer, employee or elected representative with respect to the
performance of this Agreement. In addition, Vendor may be subject to penalties stated in Title 8
of the Texas Penal Code.
11.01 TAXES
City is exempt from Federal Excise and State Sales Tax; therefore, tax shall not be
included in Vendor's charges.
12.01 ORDERS PLACED WITH ALTERNATE VENDORS
If Vendor cannot provide the goods as specified, City reserves the right and option to
obtain the products from another supplier or suppliers.
13.01 INSURANCE
Vendor shall meet all requirements as stated in the attached Invitation for Bid No. IFB
16-2013 and as set forth at:
htips://www.roundrocktexas.gov/wp-content/uploads/2014/12/coiT insurance 07 20112 pdf
4
14.01 CITY'S REPRESENTATIVE
City hereby designates the following representative(s) authorized to act in its behalf with
regard to this Agreement:
Kim Lutz, Senior Utility Services Manager
2008 Enterprise Drive
Round Rock,Texas, 78664
Telephone: (512) 341-333
15.01 RIGHT TO ASSURANCE
Whenever either party to this Agreement, in good faith, has reason to question the other
party's intent to perform hereunder, then demand may be made to the other party for written
assurance of the intent to perform. In the event that no written assurance is given within the
reasonable time specified when demand is made, then and in that event the demanding party may
treat such failure as an anticipatory repudiation of this Agreement.
16.01 DEFAULT
If Vendor abandons or defaults hereunder and is a cause of City purchasing the specified
goods elsewhere, Vendor agrees that it may be charged the difference in cost, if any, and that it
will not be considered in the re-advertisement of the service and that it may not be considered in
future bids for the same type of work unless the scope of work is significantly changed.
Vendor shall be declared in default of this Agreement if it does any of the following:
A. Fails to make any payment in full when due;
B. Fails to fully, timely and faithfully perform any of its material obligations
hereunder,
C. Fails to provide adequate assurance of performance under the "Right to
Assurance"section herein; or
D. Becomes insolvent or seeks relief under the bankruptcy laws of the United States.
17.01 TERMINATION AND SUSPENSION
A. City has the right to terminate this Agreement, in whole or in part, for
convenience and without cause, at any time upon thirty(30) days' written notice to Vendor.
B. In the event of any default by Vendor, City has the right to terminate this
Agreement for cause, upon ten (10)days' written notice to Vendor.
C. Vendor has the right to terminate this Agreement only for cause, in the event of
material and substantial breach by City, or by written mutual agreement to terminate.
D. In the event City terminates under subsections (A) or (B) of this section, the
following shall apply: Upon City's delivery of the referenced notice to Vendor, Vendor shall
5
discontinue all services in connection with the performance of this Agreement and shall proceed
to cancel promptly all existing orders and contracts insofar as such orders and contracts are
chargeable to this Agreement. Within thirty (30) days after such notice of termination, Vendor
shall submit a statement showing in detail the goods and/or services satisfactorily performed
under this Agreement to the date of termination. City shall then pay Vendor that portion of the
charges, if undisputed. The parties agree that Vendor is not entitled to compensation for services
it would have performed under the remaining term of the Agreement except as provided herein.
18.01 INDEMNIFICATION
Vendor shall defend (at the option of City), indemnify, and hold City, its successors,
assigns, officers, employees and elected officials harmless from and against all suits, actions,
legal proceedings, claims, demands, damages, costs, expenses, attorney's fees, and any and all
other costs or fees arising out of, or incident to, concerning or resulting from the fault of Vendor,
or Vendor's agents, employees or subcontractors, in the performance of Vendor's obligations
under this Agreement, no matter how, or to whom, such loss may occur. Nothing herein shall be
deemed to limit the rights of City or Vendor (including, but not limited to the right to seek
contribution) against any third party who may be liable for an indemnified claim.
19.01 COMPLIANCE WITH LAWS, CHARTER AND ORDINANCES
A. Vendor, its agents, employees and subcontractors shall use best efforts to comply
with all federal and state laws, City's Charter and Ordinances, as amended, and with all
applicable rules and regulations promulgated by local, state and national boards, bureaus and
agencies.
B. Vendor acknowledges and understands that City has adopted a Storm Water
Management Program (SWMP) and an Illicit Discharge Ordinance, Sections 14-139 through 14-
152 of the City's Code of Ordinances,to manage the quality of the discharges from its Municipal
Separate Storm Sewer System(MS4) and to be in compliance with the requirements of the Texas
Commission on Environmental Quality (TCEQ) and the Texas Pollutant Discharge Elimination
System (TPDES). The Services Provider agrees to perform all operations on City-owned
facilities in compliance with the City's Illicit Discharge Ordinance to minimize the release of
pollutants into the MS4. The Services Provider agrees to comply with of the City's stonnwater
control measures, good housekeeping practices and any facility specific stormwater management
operating procedures specific to a certain City facility. In addition, the Services Provider agrees
to comply with any applicable TCEQ Total Maximum Daily Load (TMDL) Requirements and/or
I-Plan requirements.
20.01 ASSIGNMENT AND DELEGATION
The parties hereby bind themselves, their successors, assigns and legal representatives to
each other with respect to the terms of this Agreement. Neither party shall assign, sublet or
transfer any interest in this Agreement without prior written authorization of the other party.
6
21.01 NOTICES
All notices and other communications in connection with this Agreement shall be in
writing and shall be considered given as follows:
1. When delivered personally to recipient's address as stated in this Agreement; or
2. Three (3) days after being deposited in the United States mail, with postage
prepaid to the recipient's address as stated in this Agreement.
Notice to Vendor:
Chemtrade Chemicals, Inc.
155 Gordon Baker Road, Suite 300
Toronto, Ontario, Canada M2H3N5
Notice to City:
City Manager Stephen L. Sheets, City Attorney
221 East Main Street AND TO: 309 East Main Street
Round Rock, TX 78664 Round Rock,TX 78664
Nothing contained herein shall be construed to restrict the transmission of routine
communications between representatives of City and Vendor.
22.01 APPLICABLE LAW; ENFORCEMENT AND VENUE
This Agreement shall be enforceable in Round Rock, Texas, and if legal action is
necessary by either party with respect to the enforcement of any or all of the terms or conditions
herein, exclusive venue for same shall lie in Williamson County, Texas. This Agreement shall be
governed by and construed in accordance with the laws and court decisions of the State of Texas.
23.01 EXCLUSIVE AGREEMENT
This document, and all appended documents, constitutes the entire Agreement between
Vendor and City. This Agreement may only be amended or supplemented by mutual agreement
of the parties hereto in writing, duly authorized by action of the City Manager or City Council.
24.01 DISPUTE RESOLUTION
If a dispute or claim arises under this Agreement, the parties agree to first try to resolve
the dispute or claim by appropriate internal means, including referral to each party's senior
management. If the parties cannot reach a mutually satisfactory resolution, then and in that event
any such dispute or claim will be sought to be resolved with the help of a mutually selected
mediator. If the parties cannot agree on a mediator, City and Vendor shall each select a mediator
7
and the two mediators shall agree upon a third mediator. Any costs and fees, other than attorney
fees, associated with the mediation shall be shared equally by the parties.
City and Vendor hereby expressly agree that no claims or disputes between the parties
arising out of or relating to this Agreement or a breach thereof shall be decided by any arbitration
proceeding, including without limitation, any proceeding under the Federal Arbitration Act (9
USC Section 1-14) or any applicable state arbitration statute.
25.01 SEVERABILITY
The invalidity, illegality, or unenforceability of any provision of this Agreement or the
occurrence of any event rendering any portion or provision of this Agreement void shall in no
way affect the validity or enforceability of any other portion or provision of this Agreement. Any
such void provision shall be deemed severed from this Agreement, and the balance of this
Agreement shall be construed and enforced as if this Agreement did not contain the particular
portion or provision held to be void. The parties further agree to amend this Agreement to
replace any stricken provision with a valid provision that comes as close as possible to the intent
of the stricken provision. The provisions of this section shall not prevent this entire Agreement
from being void should a provision which is of the essence of this Agreement be determined to
be void.
26.01 MISCELLANEOUS PROVISIONS
Standard of Care. Vendor represents that it employs trained, experienced and
competent persons to perform all of the services, responsibilities and duties specified herein and
that such services, responsibilities and duties shall be performed in a manner according to
generally accepted industry practices.
Time is of the Essence. Vendor understands and agrees that time is of the essence and
that any failure of Vendor to fulfill obligations for each portion of this Agreement within the
agreed timeframes will constitute a material breach of this Agreement. Vendor shall be fully
responsible for its delays or for failures to use best efforts in accordance with the terms of this
Agreement. Where damage is caused to City due to Vendor's failure to perform in these
circumstances, City may pursue any remedy available without waiver of any of City's additional
legal rights or remedies.
Force Majeure.Neither City nor Vendor shall be deemed in violation of this Agreement
if it is prevented from performing any of its obligations hereunder by reasons for which it is not
responsible as defined herein. However, notice of such impediment or delay in performance must
be timely given, and all reasonable efforts undertaken to mitigate its effects.
Multiple Counterparts. This Agreement may be executed in multiple counterparts, any
one of which shall be considered an original of this document; and all of which, when taken
together, shall constitute one and the same instrument.
8
IN WITNESS WHEREOF, City and Vendor have executed this Agreement on the dates
indicated.
City of Round Rock,Texas Chemtrade Chemicals,Inc.
By. By.
Printed Name: 4K W Printed Nat' e: IIszAB
Title: Title: MAmu=G sprcm sT
Date Signed: z Date Signed: DEC.EMER 16, 2016
Attest:
By:
_ �9� W��—
Sara L. White, City Clerk
For 4eets,
ed as to For
By:
SCity Attorney
9
j
Cr M 7 7 ti--
C��tc.��j
I
i
r3
ROUND ROCK TEXAS
PURCHASING DIV15IDN
City of Round Rock, Texas
Purchasing Division
221 East Main Street
Round Rock, Texas 78664-5299
www.roundrocktexas.gov
INVITATION FOR BID
Water Treatment Chemicals
SOLICITATION — IFB No. 16-013
AUGUST 2016
Exhibit "A"
i
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
TABLE OF CONTENTS
Part I General
1. Purpose
2. Background
3. Attachments
4. Clarification
5. Respondent Qualifications
6. Subcontractors
7. Damage
8. Safety
9. Pricing
10.Price Increase
11.Agreement Term
12.Acceptance/Inspection
Part II Specifications
1. Service Requirements
2. Raw Water Characteristics
3. Chemical Specifications
4. Chemical Testing
5. Freight
6. Point-of-Contact/Designated Representative
7. Workforce
8. Order Quantity
9. Permits
Part III Schedule and Response Instructions
1. Schedule of Events
2. Solicitation Updates
3. Response Due Date
4. Best Value Evaluation and Criteria
5. Award
6. Post Award Meeting
ExhibitbAW1
I
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
7. Non-Appropriation
8. Interlocal Cooperative Contracting (Piggyback)
Part IV Response
1. Response Requirements
Part V Content
1. Confidentiality of Content
Part VI General Terms and Conditions
1. Insurance
2. Definitions, Terms, and Conditions
3. Prompt Payment Policy
Part VII Water Treatment Chemicals— Itemized List
(Refer to pages 13—20)
Part VIII Solicitation Instructions
(Refer to pages 21 -23)
Attachments
Attachment A—Bid Form
Attachment B— Reference Sheet
Attachment C—Addendum Acknowledgement Form
ExhiiitfYA"
i
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
CITY OF ROUND ROCK
INVITATION FOR BID
Water Treatment Chemicals
PART
GENERAL
1. PURPOSE: The City of Round Rock, herein after"the City"seeks formal bids to establish a multiple
year agreement with a qualified person,firm or corporation, herein after"Respondent",to provide all
equipment, material and labor necessary to supply and deliver various water supply treatment
chemicals for treating potable water supplies located at various locations throughout the City of
Round Rock,Texas.
2. BACKGROUND: The City of Round Rock operates a fifty-two (52) million per day surface water
treatment plant,a five(5)million gallons per day ground water plant and a six(6)million gallons per
day waste water effluent reuse plant, each facility uses bulk treatment chemicals in their treatment
processes.
3. ATTACHMENTS: Attachment A through C,are herein made part of this invitation for bid:
3.1 Attachment A: Bid Form
3.2 Attachment B: Respondent's Reference Sheet
3.3 Attachment C: Addendum Acknowledgment Form
4. CLARIFICATION: For questions or clarification of specifications,'you may contact:
Mike Schurwon,CPPB,CTPM
Purchaser
Purchasing Division
City of Round Rock
E-mail: mschurwon(a!roundrocktexas.gov
The individual listed above may be contacted by e-mail for clarification of the specifications
only. No authority is intended or implied that specifications may be amended or alterations
accepted prior to solicitation opening without written approval of the City of Round Rock through
the Purchasing Department.
5. RESPONDENT QUALIFICATIONS: The City has established the following minimum qualifications.
Respondents who do not meet the minimum qualifications will not be considered for award. The
Respondent shall:
5.1. Be firms,corporations,individuals or partnerships normally engaged in providing and delivering
various water supply treatment chemicals for treating potable water supplies as specified
herein and have adequate organization, facilities, equipment, financial capability, and
personnel to ensure prompt and efficient service to the City;
5.2. Provide all labor, supplies and materials required to satisfactorily perform the services as
specified herein. The City shall not be responsible for any Respondent's tools, equipment or
materials lost or damaged during the performance of the services specified herein;
5.3. Be domiciled in or have a home office inside the United States. Respondents domiciled outside
the United States, or not having a home office inside the United States will not be included for
consideration in this procurement process.
Exhp AW'
i City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
6. SUBCONTRACTORS: Respondent shall not subcontract or otherwise engage subcontractors to
perform required services. The City seeks to do business directly with a company experienced in the
supply and deliver of various water supply treatment chemicals for treating potable water supplies.
7. DAMAGE: The Respondent shall be responsible for damage to the City's equipment and / or
property,the workplace and its contents by its work,negligence in work,its personnel and equipment
usage.
8. SAFETY: The City reserves the right to remove any employee from City property for violation of
federal, state, and local health, safety and environmental laws, ordinances, rules and regulations.
The Respondent shall:
8.1. Ensure that all employees comply with all Occupational Safety and Health Administration
(OSHA),State and City safety and occupational health standards and other applicable federal,
state,and local health,safety,and environmental laws ordinances,rules and regulations in the
performance of these services;
8.2. Be held responsible for the safety of their employees and unsafe acts or conditions that may
cause injury or damage to any persons or property within and around the work site. In case of
conflict,the most stringent safety requirement shall govern;
8.3. Indemnify and hold the City harmless from and against all claims, demands, suits, actions,
judgments,fines penalties and liability of every kind arising from the breach of the Successful
Respondents'obligations under this paragraph.
9. PRICING: The Respondent shall determine and submit a fixed cost for the work and shall include all
incidental costs,labor,overhead charges,travel,payroll expenses,freight,equipment acquisition and
maintenance,demurrage,fuel surcharges,delivery charges,costs associated with obtaining permits,
insurance, bonds and risk management. No separate line item charges shall be permitted for either
response or invoice purposes.
10. PRICE INCREASE: Contract prices for the various water supply treatment chemicals shall remain
firm throughout the initial twelve(12) month term of the contract. A price increase to the agreement
may be considered at renewal time each year and shall be equal to the consumer price index for that
year, but at no time can the increase be greater than 25%of the contract price.
10.1. Consumer Price Index (CPI): Price adjustments will be made in accordance with the
percentage change in the U.S. Department of Labor Consumer Price Index (CPI-U) for all
Urban Consumers. The price adjustment rate will be determined by comparing the percentage
difference between the CPI in effect for the base year six-month average (January through
June OR July through December); and each (January through June OR July through
December six-month average)thereafter. The percentage difference between those two CPI
issues will be the price adjustment rate. No retroactive contract price adjustments will be
allowed. The Consumer Price Index(CPI)is found at the Bureau of Labor Statistics,Consumer
Price Index website: http://www.bls.gov/cpi/
10.2. Procedure to Request Increase:
10.2.1. Mail the written price increase request with the rate detail comparison and
comprehensive calculation to the designated City Contract Specialist a minimum of 45
days prior to each renewal period. The detailed written calculation will be verified and
confirmed. All written requests for increases must include the City of Round Rock
contract number, solicitation reference information and contact information for the
authorized representative requesting the increase. Price increase requests shall be
! sent by mail to:
Exhibi*V 3A"
I
3
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
City of Round Rock
Purchasing Department
Attn: Contract Specialist
' 221 East Main Street
Round Rock,TX 79664-5299
10.2.2. Upon receipt of the request, the City reserves the right to either,accept the escalation
and make change to the purchase order within 30 days of the request, negotiate with
the Vendor or cancel the agreement or purchase order if an agreement cannot be
reached on the value of the increase.
11. AGREEMENT TERM: The terms of the awarded agreement shall include but not be limited to the
following:
11.1 The term of the Agreement shall begin from date of award and shall remain in full force for six
(60)months.
11.2 The City reserves the right to review the awarded respondents' performance anytime during
the contract term.
11.3 If the awarded respondent fails to perform its duties in a reasonable and competent manner,
the City shall give written notice to the respondent of the deficiencies and the respondent shall
have thirty (30) days to correct such deficiencies. If the respondent fails to correct the
deficiencies with the thirty (30) days, the City may terminate the agreement by giving the
respondent written notice of termination and the reason for the termination.
12. ACCEPTANCE/INSPECTION: Acceptance inspection should not take more than five(5)working
days. The awarded respondent will be notified within the time frame if the services delivered are
not in full compliance with the specifications. In the event the services are not performed to the
satisfaction of the City, the product will be rejected. Returned and/or rejected product shall be
transported off-site at no cost to the City.City facilities that require cleaning or decontamination due
to contractor negligence shall be remediated at no cost to the City. If any agreement or purchase
order is cancelled for non-acceptance,the needed services may be purchased elsewhere and the
vendor may be charged liquidated damages.
Exhi MA"
City of Round Rock
Water Treatment Chemicals
j IFB No. 16-013
Class/Item: 885-16
August 2016
PART II
SPECIFICATIONS
SCOPE: The City of Round Rock requests various water supply treatment chemicals for treating potable
water supplies located at various locations throughout the City of Round Rock,Texas.
1. SERVICE REQUIREMENTS: Services shall be performed and products deliver to the following
locations at:
Water Plant
5494 N. IH 35
Round Rock,Texas 78681
Lake Creek Well Site
310 S. Burnet Street
Round Rock,TX 78664
Brushy Creek Regional Waste Water Facility
3939 Palm Valley Blvd '
Round Rock,TX 78664
2. RAW WATER CHARACTERISTICS
Constituent Average Concentration or Range
Hardness 160 to 180 mg/L
Turbidity 1.5 to 4.0 NTU
Alkalinity 165 to 185 mg/L
Temperature 10 to 30 degrees Celsius
pH 7.2 to 7.8
3. CHEMICAL SPECIFICATIONS: All chemicals specified herein shall meet with the intended use,
critical requirements and delivery specifications outlined on itemized chemical list on pages 13-20
of this solicitation.
4. CHEMICAL TESTING: Sample testing shall be required for Liquid Aluminum Sulfate, Liquid
Aluminum Sulfate with 2% Copper Sulfate, Liquid Cationic Polymer, Aluminum Chlorohydrate and
Belt Press Polymer.
4.1 Testing instructions are specified on itemized chemical list, pages 13-20 of this solicitation.
4.2 The prospective low bidder(s)shall be required to submit the chemical product samples for
testing no later than(7)days from the date the chemical samples are requested by the City.
4.3 Failure to submit the required chemical samples for testing may disqualify a response for
consideration for award.
5. FREIGHT: Price shall include FOB Destination, pre-paid and allowed unless otherwise specified in
writing. Price shall be inclusive of demurrage charges. No fuel surcharges shall be allowed.
i
ExhibitflU"
i
City of Round Rock
iWater Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
6. POINT OF CONTACT/DESIGNATED REPRESENTATIVE:
6.1 Respondent's point of contact: In order to maintain consistent standards of quality work
performed across the City, the City shall be provided with a designated and identified point of
contact upon award of the contract to include contact information. The City's designated
representative shall be notified by the Respondent immediately should the point of contact
change.
6.2 The City's designated representative: Upon contract award, the City's designated
representative shall be:
Kim Lutz
Senior Utility Service Manager
Water Treatment Plant
E-mail: kiml@roundrocktexas.gov
7 WORKFORCE: Successful Respondent shall:
7.1 Ensure Respondent's employees perform the services in a timely, professional and efficient
manner;
7.2 Ensure Respondent's employees, while working on City property, wear a company uniform
that clearly identifies them as the Respondent's employee;
7.3 Employ all personnel for work in accordance with the requirements set forth by the United
States Department of Labor. The City reserves the right to verify citizenship or right to work in
the United States.
8 ORDER QUANTITY: The quantities shown on the solicitation are estimates only. No guarantee of
any minimum or maximum purchase is made or implied. The City will only order the goods/services
needed to satisfy requirements within budgetary constraints, which may be more or less than
indicated.
9 PERMITS: The Successful Respondent shall obtain all necessary permits, licenses, and/or
certificates required by federal, state and local laws, ordinances, rules or regulations for the
completion and delivery of goods/services as specified herein.
Exh ietf27A "
i
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item: 885-16
August 2016
PART 111
SCHEDULE AND RESPONSE INSTRUCTIONS
1. SCHEDULE OF EVENTS: It is the City's intention to comply with the following solicitation timeline:
EVENT DATE
Solicitation released August 18,2016
Deadline for submission of questions August 25,2016 @ 5:00 PM, CST
City responses to questions or addendums August 30,2016 @ 5:00 PM, CST
Deadline for submission of responses September 8 ,2016 @ 3:00 PM, CST
All questions regarding the solicitation shall be submitted in writing by August 25,2016 @ 5:00 p.m.,
CST on the due date noted above. A copy of all the questions submitted and the City's response to
the questions shall be posted on the City's webpage in the form of an addendum at:
http•//www roundrocktexas-gov/departments/purchasing/purchasing-active-
solicitations/ http://esbd.epa.state.tx.us/
Questions shall be submitted to the City contact named herein. The City reserves the right to modify
these dates. Notice of date change will be posted to the City's website.
2. SOLICITATION UPDATES: Respondents shall be responsible for monitoring the City's website
at http•//www roundrocktexas gov/departments/purchasing/purchasing-active-solicitations/
http://esbd.cpa.state.tx.us/for any updates pertaining to the solicitation described herein. Various
updates may include addendums, cancelations, notifications, and any other pertinent information
necessary for the submission of a correct and accurate response. The City will not be held
responsible for any further communication beyond updating the website.
3. RESPONSE DUE DATE: Signed and sealed responses are due at or before September 8,2016,
@ 3:00 p.m.,CST on the due date noted in Part III,Section 1. Mail or hand deliver sealed responses
to:
City of Round Rock—1st Floor Receptionist Desk
Attn: Mike Schurwon, CPPB,CTPM
Purchasing Department
221 E. Main Street
Round Rock,Texas 78664-5299
3.1 Sealed responses shall be clearly marked on the outside of packaging with the company name,
solicitation name(Water Treatment Chemicals), bid number(IFB-16-013),due date and"DO
NOT OPEN".
3.2 Facsimile or electronically transmitted responses are not acceptable.
3.3 Responses cannot be altered or amended after opening.
3.4 No response can be withdrawn after opening without written approval from the City for an
acceptable reason.
3.5 The City will not be bound by any oral statement or offer made contrary to the written
specifications.
3.6 Samples and/or copies shall be provided at the Respondent's expense, and shall become the
property of the City.
Exhbf 27A"
i ,
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
j 4. BEST VALUE EVALUATION AND CRITERIA: The City reserves the right to reject any or all
responses, or to accept any response deemed most advantageous, or to waive any irregularities or
informalities in the response received that best serves the interest and at the sole discretion of the
City. All solicitations received may be evaluated based on the best value for the City. In determining
best value,the City may consider:
4.1 Purchase price;
4.2 Reputation of Respondent and of Respondent's goods and services;
4.3 Quality of the Respondent's goods and services;
4.4 The extent to which the goods and services meet the City's needs;
4.5 Respondent's past performance with the City;
4.6 The total long-term cost to the City to acquire the Respondent's goods or services;
4.7 Any relevant criteria specifically listed in the solicitation.
Respondents may be contacted for clarification of bid and/or to discuss details of the services they
are proposing.This may include a presentation and/or the request for additional material/information
to clarify.
5. AWARD: The City reserves the right to enter into an Agreement or a Purchase Order with a single
award, split award, primary and secondary award, non-award, or use any combination that best
serves the interest and at the sole discretion of the City. Award announcement will be made upon
City Council approval of staff recommendation and executed agreement. Award announcement will
appear on the City's website at http•//www.roundrocktexas.aov/departments/purchasing/purchasin4-
active-solicitations/
6. POST AWARD MEETING: The City and Successful Respondent(s)may have a post award meeting
to discuss, but not be limited to the following:
6.1 The method to provide a smooth and orderly transition of services performed from the current
contractor;
6.2 Provide City contact(s)information for implementation of agreement.
6.3 Identify specific milestones,goals and strategies to meet objectives.
7. NON-APPROPRIATION: The resulting Agreement is a commitment of the City's current revenues
only. It is understood and agreed the City shall have the right to terminate the Agreement at the end
of any City fiscal year if the governing body of the City does not appropriate funds sufficient to
purchase the estimated yearly quantities, as determined by the City's budget for the fiscal year in
question. The City may affect such termination by giving Vendor a written notice of termination at the
end of its then current fiscal year.
8. INTERLOCAL COOPERATIVE CONTRACTING (PIGGYBACK): Other governmental entities may
be extended the opportunity to purchase off of the City's agreements,with the consent and agreement
of the awarded Vendor(s)and the City. Such consent and agreement shall be conclusively inferred from
lack of exception to this clause in a Respondent's submittal. However, all parties indicate their
understanding and hereby expressly agree that the City is not an agent of,partner to,or representative
of those outside agencies or entities and that the City is not obligated or liable for any action or debts
that may arise out of such independently-negotiated"piggyback"procurements.
ExllbitoA II
I
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/item:885-16
August 2016
PART IV
RESPONSE
1. RESPONSE REQUIREMENTS:The City of Round Rock makes no warranty that this checklist is a full
comprehensive listing of every requirement specified in the solicitation. This list is only a tool to assist
participating Respondents in compiling their final responses. Respondents are encouraged to carefully
read the entire solicitation.
Respondents shall submit one (1) evident signed "Original" and two (2) copies of the response
requirements including any required attachments. The samples and/or copies shall be provided at the
Respondent's expense, and shall become the property of the City.
This invitation forbid(IFB)does not commit the City to contract for any supply or service. Respondents
are advised that the City will not pay for any administrative costs incurred in response preparation to
this IFB;all costs associated with responding to this IFB will be solely at the interested parties'expense.
Not responding to this IFB does not preclude participation in any future RFP/RFQ/IFB.
For your bid to be responsive, all required items identified below shall be submitted with your
proposal.
Attachment A: Responses shall be submitted on itemized,signed Bid Sheet provided herein. Failure
to itemize or sign solicitation may result in disqualification. Submission of responses on forms other
that the City's Solicitation Document may result in disqualification of the response.
Attachment B: Provide the name, address, telephone number and E-MAIL of at least three (3)
Municipal, Government agencies or firms of comparable size that have utilized similar service within
the last two(2)years. City of Round Rock references are not applicable. References may be checked
prior to award. Any negative responses received may result in disqualification of submittal.
Attachment C: Provide signed copy of the Addendum Acknowledgement Form or a signed copy of
each issued addendum with bid upon submission.
Additional Information Requested:
Contract Information: Respondent shall provide information of any current established contract
with a local City, County, Municipality, Cooperative Agreement, Comptroller of Public Accounts(CPA)
Texas Smart Buy Contract,Texas Multiple Award Schedule(TXMAS),General Services
Administration(GSA), Inter-local Agreement,or any other contractual resource.
PART V
CONFIDENTIALITY OF CONTENT
1. CONFIDENTIALITY OF CONTENT:All documents submitted in response to a solicitation shall be
subject to the Texas Public Information Act. Following an award,responses are subject to release
as public information unless the response or specific parts of the response can be shown to be
exempt from the Texas Public Information Act. Pricing is not considered to be confidential under
any circumstances.
1.1 Information in a submittal that is legally protected as a trade secret or otherwise confidential
must be clearly indicated with stamped, bold red letters stating"CONFIDENTIAL"on that
section of the document.The City will not be responsible for any public disclosure of
confidential information if it is not clearly marked as such.
1.2 If a request is made under the Texas Public Information Act to inspect information designated
as confidential,the Respondent shall, upon request from the City,furnish sufficient written
Exhibftof2�"
i
i
I
i
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
reasons and information as to why the information should be protected from disclosure.The
matter will then be presented to the Attorney General of Texas for final determination.
PART VI
GENERAL TERMS AND CONDITIONS I INSURANCE REQUIREMENTS
(ITEMS BELOW APPLY TO AND BECOME A PART OF THE CONTRACT)
1. INSURANCE: The Respondent shall meet or exceed all insurance requirements set forth by the
Insurance Requirements as identified on the City's website at: http://www.roundrocktexas.qov/wp-
content/uploads/2014/12/corr insurance 07.20112.pdf
2. DEFINITIONS, TERMS AND CONDITIONS: By submitting a response to this solicitation, the
Respondent agrees that the City's standard Definitions, Terms and Conditions, in effect at the time
of release of the solicitation, shall govern unless specifically provided otherwise in a separate
agreement or on the face of a purchase order. Said Definitions, Terms and Conditions are subject
to change without notice. It is the sole responsibility of respondents to stay apprised of changes.
The City's Definitions, Terms and Conditions can be obtained from the City's website
at: http://www.roundrocktexas.qov/wp-content/uploads/2014/12/corr t c revised 07.2011.pdf
3. PROMPT PAYMENT POLICY: Payments will be made in accordance with the Texas Prompt
Payment Law, Texas Government Code, Subtitle F, Chapter 2251. The City will pay Vendor within
thirty days after the acceptance of the supplies, materials, equipment, or the day on which the
performance of services was completed or the day, on which the City receives a correct invoice for
the supplies,materials,equipment or services,whichever is later. The Vendor may charge a late fee
(fee shall not be greater than that which is permitted by Texas law) for payments not made in
accordance with this prompt payment policy; however, this policy does not apply to payments made
by the City in the event:
3.1 There is a bona fide dispute between the City and Vendor concerning the supplies,materials,
services or equipment delivered or the services performed that causes the payment to be late;
or
3.2 The terms of a federal agreement,grant, regulation, or statute prevent the City from making a
timely payment with Federal Funds;or
3.3 The is a bona fide dispute between the Vendor and a subcontractor or between a subcontractor
and its suppliers concerning supplies, material, or equipment delivered or the services
performed which caused the payment to be late; or
3.4 The invoice is not mailed to the City in strict accordance with instructions, if any, on the
purchase order or agreement or other such contractual agreement.
EXh1 f27A"
i
i
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
PART VII
i
Water Treatment Chemicals
WATER TREATMENT CHEMICAL LIST ITEMIZED AS FOLLOWS:
CHLORINE OR EQUIVALENT
1. All chlorine delivered shall:
1.1. Be approved as a drinking water additive in accordance with National Sanitation
Foundation(NSF)/American National Standards Institute(ANSI)Standard 60.
1.2. Be filtered with a media removing eighteen to twenty microns prior to filling any container
for delivery to the City of Round Rock.
1.3. Be 99.5 percent pure by volume.
1.4. Contain no soluble mineral or organic substances in quantities producing deleterious or
injurious effects on the health of persons consuming water that has been treated properly
with liquid chlorine.
1.5. Not to exceed 150 parts per million(ppm)moisture by weight.
1.6. Not to exceed 10 ppm lead, 1 ppm mercury,3 ppm arsenic or 30 ppm of the sum of all
heavy metals.
1.7. Be in conformance with all applicable federal, state and local laws.
1.8. Have a certified weight ticket.
1.9. Be in clean, properly identified and labeled vehicles used only for the transport and
delivery of chlorine.
1.10. Use City owned equipment(e.g.; hoist apparatus, hand truck,etc.)
1.11. Be delivered to:
Water Plant
5494 N. IH 35
Round Rock,Texas 78681
And
Lake Creek Well Site
310 S.Burnet St.
Round Rock,Texas 78664
And
Brushy Creek Regional Wastewater Plant
3939 Palm Valley Blvd.
Round Rock,Texas 78664
2. All containers shall:
2.1. Meet all applicable Department of Transportation and Chlorine Institute, Inc.standards.
2.2. Open with reasonable ease, using a wrench not greater than six inches in length.
2.3. Have a new or rebuilt valve installed prior to delivery.
2.4. Be visually inspected, vacuumed,exterior repainted, and leak tested prior to delivery.
ExhibitolbA"
i
I
I
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item: 885-16
August 2016
2.5. Successfully pass hydrostatic testing at least every five years.
2.6. Have container number and tare weight clearly visible and legible.
3. The successful Respondent shall maintain a twenty-four (24) hour emergency service for liquid
chlorine emergencies that includes,at a minimum,the following:
3.1. Trained and certified personnel in hazardous materials response that shall be on-site within
two(2)hours of emergency notification from the City.
3.2. All necessary equipment and apparatus for managing and remediating any emergency
leak or release of chlorine from Respondent supplied cylinders or containers.
3.3. Procedures for the removal and disposal of defective or leaking cylinders or containers.
4. THE SUCCESSFUL RESPONDENT SHALL,AT NO ADDITIONAL COST,PROVIDE ANNUAL
TRAINING TO CITY EMPLOYEES ON THE CHARACTERISTICS AND SAFE HANDLING
PRACTICES OF CHLORINE GAS.
LIQUID ALUMINUM SULFATE OR EQUIVALENT
1. All Liquid Aluminum Sulfate delivered shall:
1.1. Be approved as a drinking water additive in accordance with NSF/ANSI Standard 60.
1.2. Contain no less than 8 percent water-soluble aluminum oxide.
1.3. Contain no less than .35 percent water soluble iron.
1.4. Be free of insoluble and suspended matter,including but not limited to:chips,dirt, grit and
all other foreign matter.
I.S. Possess adequate clarity for the easy reading of measuring devices.
1.6. Be in conformance with all applicable federal, state and local laws.
1.7. Have a certified weight ticket.
1.8. Be in clean, properly identified and labeled trucks used only for the transport and delivery
of liquid aluminum sulfate.
1.9. Be delivered into four 10,000-gallon bulk storage tanks through a standard 2-inch female
quick connect.
1.10. Be delivered to:
Water Plant
5494 N. IH 35
Round Rock,Texas 78681
2. Special Requirements
2.1. The City shall request chemical samples for Liquid Aluminum Sulfate for testing from any
prospective low bidder(s)after the bid opening date.
2.2. Respondents shall ship, at their own expense,a sample of the product to be bid to:
Kim Lutz
2008 Enterprise Dr.
Round Rock,TX 78664
2.3. The quantity of chemical sample product requested by the City shall be at least five(5)
gallons and must be received at the above address.
Exhibit "'A"
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
LIQUID ALUMINUM SULFATE with 2%Copper Sulfate OR EQUIVALENT
1. All Liquid Aluminum Sulfate delivered shall:
1.1. Be approved as a drinking water additive in accordance with NSF/ANSI Standard 60.
1.2. Contain no less than 8 percent water-soluble aluminum oxide.
1.3. Contain no less than .35 percent water soluble iron.
1.4. Be free of insoluble and suspended matter, including but not limited to:chips, dirt,grit and
all other foreign matter.
1.5. Possess adequate clarity for the easy reading of measuring devices.
1.6. Be delivered in conformance with all applicable federal, state and local laws.
1.7. Have a certified weight ticket.
1.8. Be in a clean, properly identified and labeled trucks used only for the transport and
delivery of liquid aluminum sulfate.
1.9. Be delivered into four 10,000-gallon bulk storage tanks through a standard 2-inch female
quick connect.
1.10. Be delivered to:
Water Plant
5494 N.IH 35
Round Rock,Texas 78681
2. Special Requirements
2.1 The City shall request chemical samples for Liquid Aluminum Sulfate with 2%copper
sulfate for testing from any prospective low bidder(s)after the bid opening date.
2.2 Respondents shall ship, at their own expense,a sample of the product to be bid to:
Kim Lutz
2008 Enterprise Dr.
Round Rock,TX 78664
2.3 The quantity of chemical sample product requested by the City shall be at least five(5)
gallons and must be received at the above address.
ALUMINUM CHLOROHYDRATE OR EQUIVALENT
1. All Aluminum Chlorohydrate delivered shall:
1.1. Be approved as a drinking water additive in accordance with NSF/ANSI Standard 60.
1.2. Contain approximately 50%aluminum chlorohydrate by weight.
1.3. Contain no more than 100 ppm Fe203.
1.4. Contain a relative basicity of 83%.
1.5. Be free of insoluble and suspended matter, including but not limited to:chips, dirt, grit and
all other foreign matter.
1.6. Possess adequate clarity for the easy reading of measuring devices.
1.7. Be delivered in conformance with all applicable federal,state and local laws.
1.8. Have a certified weight ticket.
1.9. Be in a clean, properly identified and labeled trucks used only for the transport and
delivery of aluminum chlorohydrate.
ExW*Lblitot'27A"
jCity of Round Rock
I Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
1.10. Be delivered into four 10,000-gallon bulk storage tanks through a standard 2-inch female
quick connect.
1.11. Be delivered to:
Water Plant
5494 N.IH 35
Round Rock,Texas 78681
2. Special Requirements
2.1. The City may request chemical samples for testing from any prospective low bidder(s)after
the bid opening date.
2.2. Respondents shall ship,at their own expense, a sample of the product to be bid to:
Kim Lutz
2008 Enterprise Dr.
Round Rock,TX 78664
2.3. The quantity of the chemical sample product the City may request shall be at least five(5)
gallons and must be received at the above address.
HYDROFLUOSILICIC ACID 23%OR EQUIVALENT
1. All Hydrofluosilicic Acid delivered shall:
1.1. Be approved as a drinking water additive in accordance with NSF/ANSI Standard 60.
1.2. Be free of insoluble and suspended matter, including but not limited to: chips, dirt, grit and
all other foreign matter.
1.3. Contain between 20%and 30%Hydrofluosilicic Acid.
1.4. Maximum dosage of 1.2 mg/L fluoride ion.
1.5. Be delivered in conformance with all applicable federal,state and local laws.
1.6. Have a certified weight ticket.
1.7. Be in a clean,properly identified and labeled trucks used only for the transport and
delivery of hydrofluosilicic acid.
1.8. Be delivered into a bulk storage tank through a standard 2-inch female quick connect.
1.9. Be delivered to:
Water Plant
5494 N.11-1135
Round Rock,Texas 78681
And
Lake Creek Well Site
310 S.Burnet St.
Round Rock,Texas 78664
Exhibit,,"
i
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
2. The successful Respondent shall maintain a twenty-four (24) hour emergency service for
hydrofluosilicic acid emergencies that includes,at a minimum,the following:
2.1. Trained and certified personnel in hazardous materials response that shall be on-site within
two(2)hours of emergency notification from the City.
2.2. All necessary equipment and apparatus for managing and remediating an emergency leak
or release of hydrofluosilicic acid.
COAGULANT AID(Liquid Cationic Polymer)OR EQUIVALENT
NOTE: Because the quality of the City's raw water changes periodically,the City is interested in receiving
bids for various weights of polymer. Data characterizing the raw water quality is included in Part III,Para.
No. 8 for use in product selection. Respondents may also submit polymer blends. The following
specifications apply to all coagulant aids:
1. All Liquid Cationic Polymer shall:
1.1. Be approved as a drinking water additive in accordance with NSF/ANSI Standard 60.
1.2. Have a high molecular weight.
1.3. Be cationic.
1.4. Be a liquid that is readily soluble in water at all concentrations.
1.5. Be effective over a pH range of 5.0 to 7.0 Standard Units.
1.6. Be effective over a temperature range from five degrees Celsius to 30 degrees Celsius.
1.7. Be resistant to chlorine.
1.8. Contain no less than.35 percent water soluble iron.
1.9. Be free of insoluble and suspended matter, including but not limited to:chips,dirt,grit and
all other foreign matter.
1.10. Possess adequate clarity for the easy reading of measuring devices.
1.11. Be delivered in conformance with all applicable federal,state and local laws.
1.12. Have a certified weight ticket.
1.13. Be in clean, properly identified and labeled fifty-five gallon drums.
1.14. Delivered to:
Water Plant
5494 N.IH 35
Round Rock,Texas 78681
2. Special Requirements
2.1. The City shall request chemical samples for Liquid Cationic Polymer coagulant aid for
testing from any prospective low bidder(s)after the bid opening date.
2.2. Respondents shall ship,at their own expense,a sample of the product to be bid to:
Kim Lutz
2008 Enterprise Dr.
Round Rock,TX 78664
I 2.3. The quantity of chemical sample product requested by the City shall be at least five(5)
gallons and must be received at the above address.
SODIUM PERMANGANATE 20%OR EQUIVALENT
1. All Sodium Permanganate delivered shall:
Exhibito?hA"
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
1.1 Be approved as a drinking water additive in accordance with NSF/ANSI Standard 60.
1.2 Contain 19 to 21.5%sodium permanganate.
1.3 Have a pH between 5 and 8 standard units.
1.4 Have a specific gravity of 1.15 to 1.17.
1.5 Be delivered in conformance with all applicable federal, state and local laws.
1.6 Have a certified weight ticket.
1.7 Be in clean, properly identified and labeled totes.
1.8 Be delivered to:
Water Plant
5494 N.IH 35
Round Rock,Texas 78681
2. The successful Respondent shall maintain a twenty-four(24)hour emergency service for
Potassium Permanganate emergencies that includes, at a minimum,the following:
2.1. Trained and certified personnel in hazardous materials response that shall be on-site within
two(2)hours of emergency notification from the City.
2.2. All necessary equipment and apparatus for managing and remediating an emergency leak
or release of sodium permanganate.
2.3. Procedures for the removal and disposal of defective or leaking drums or containers.
BELT PRESS POLYMER OR EQUIVALENT
1. All Belt Press Polymer delivered shall:
1.1. Have a high molecular weight.
1.2. Have a broad cationic charge.
1.3. Be a liquid that is readily soluble in water at all concentrations.
1.4. Be effective over a pH range of 5.0 to 7.0 Standard Units.
1.5. Be effective over a temperature range from five degrees Celsius to 30 degrees Celsius.
1.6. Contain no less than .35 percent water soluble iron.
1.7. Be free of insoluble and suspended matter, including but not limited to:chips, dirt,grit and
all other foreign matter.
1.8. Possess adequate clarity for the easy reading of measuring devices.
1.9. Achieve a belt filter cake that is at least 93%solids at optimum dosing rates.
1.10. Be delivered in conformance with all applicable federal, state and local laws.
1.11. Have a certified weight ticket.
1.12. Be in clean, properly identified and labeled fifty-five gallon drums.
1.13. Be delivered to:
Water Plant
5494 N.IH 35
Round Rock,Texas 78681
Exh' "
itof2�
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
2. Special Requirements
2.1. The City shall request chemical samples for Belt Press Polymer for testing purposes from
any prospective low bidder(s)after the bid opening date.
2.2. Respondents shall ship, at their own expense, a sample of the chemical product to be bid
to:
Kim Lutz
2008 Enterprise Dr.
Round Rock,TX 78664
2.3. The quantity of chemical sample product requested by the City shall be at least five(5)
gallons and must be received at the above address.
LIQUID AMMONIUM SULFATE(LAS)OR EQUIVALENT
1. All Liquid Ammonium Sulfate delivered shall:
1.1 Be approved as a drinking water additive in accordance with NSF/ANSI Standard 60.
1.2 Contain no soluble mineral or organic substances in quantities producing deleterious or
injurious effects on the health of persons consuming water that has been treated properly
with chlorine.
1.3 Contain 10%ammonia(NH3).
1.4 Be completely soluble in water.
1.5 Be delivered in conformance with all applicable federal,state and local laws.
1.6 Have a certified weight ticket.
1.7 Be in clean, properly identified and labeled vehicles used only for the transport and
delivery of liquid ammonium sulfate.
1.8 Be delivered into a bulk storage tank through a standard 2-inch female quick connect.
1.9 Be delivered to the
Water Plant
5494 N.IH 35
Round Rock,Texas 78681
And
Lake Creek Well Site
310 S. Burnet Street
Round Rock,TX 78664
2. The successful Respondent shall maintain a local twenty-four(24)hour emergency service for
liquid ammonium sulfate emergencies that includes, at a minimum,the following:
2.1 Trained and certified personnel in hazardous materials response that shall be on-site
within two(2)hours of emergency notification from the City.
2.2 All necessary equipment and apparatus for managing and remediating an emergency
leak or release of liquid ammonium sulfate.
ExlAbi* 2W'
i
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item: 885-16
August 2016
SODIUM HYDROXIDE(17%)OR EQUIVALENT
1. All Sodium Hydroxide delivered shall:
1.1 Contain 17—20%sodium hydroxide.
1.2 Be completely soluble in water.
1.3 Be delivered in conformance with all applicable federal, state and local laws.
1.4 Have a certified weight ticket.
1.5 Be in clean, properly identified and labeled totes used only for the transport and delivery
of sodium hydroxide.
1.6 Be delivered to the
Water Plant
5494 N. IH 35
Round Rock,Texas 78681
2. The successful Respondent shall maintain a local twenty-four(24)hour emergency service for
liquid ammonium sulfate emergencies that includes, at a minimum,the following:
2.1 Trained and certified personnel in hazardous materials response that shall be on-site
within two(2)hours of emergency notification from the City.
2.2 All necessary equipment and apparatus for managing and remediating an emergency
leak or release of sodium hydroxide.
NOTE: The City of Round Rock reserves the right to request chemical product
samples of all other chemicals in addition to the required samples for liquid
aluminum sulfate, liquid aluminum sulfate with 2% copper sulfate, liquid cationic
polymer coagulant aid, and belt press polymer chemicals.
E x hib ifto127A"
i
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
PART VIII
SOLICITATION INSTRUCTIONS
ITEMS BELOW APPLY TO AND BECOME A PART OF TERMS AND CONDITIONS OF
SOLICITATION
ANY EXCEPTIONS THERETO MUST BE IN WRITING
1.SOLICITATION REQUIREMENTS:
1.1 Responding requires pricing per unit shown and extensions. If trade discount is shown on
solicitation, it should be deducted and net line extensions shown. Respondents guarantees
product offered will meet or exceed specifications identified in this Invitation for Bid(IFB).
1.2 Solicitations shall be submitted on Solicitation Sheet. Each response shall be placed in a separate
envelope completely and properly identified. Responses must be in the Purchasing Department
before the hour and date specified on the solicitation.
1.3 Late responses properly identified will be returned to respondent unopened. Late responses will not
be considered.
1.4 Respond F.O.B.destination,freight,prepaid,&allowed unless otherwise specified on the solicitation.
If otherwise,show exact cost to deliver.
1.5 Response shall show unit price on quantity and unit of measure specified,extension and show total.
In case of errors in extension,unit prices shall govern.Responses subject to unlimited price increase
will not be considered.
1.6 Submitted prices shall be firm for acceptance 30 days from solicitation opening date."Discount from
List' responses are not acceptance unless requested. Cash discount will not be considered in
determining the low response.All cash discounts offered will be taken if earned.
1.7 Responses shall give Tax Identification Number, full name and address of respondent. Failure to
sign will disqualify response. Person signing response shall show title and authority to bind
signatories firm in an agreement. Firm name should appear on each page in the block provided in
the upper right corner. Business Entity shall be one(1)of the following: Individual,Partnership,Sole
Proprietorship, Estate/Trust, Corporation, Government, or Non-profit, all others shall be specified.
INDIVIDUAL:List name and number as shown on Social Security Card.SOLE PROPRIETORSHIP:
List legal name followed by legal business name and Social Security Number. ALL OTHERS: List
legal name of entity and Tax Identification Number(TIN).
1.8 Responses cannot be altered or amended after opening time.Any Alterations made before opening
time shall be initialed by respondent or an authorized agent. No response can be withdrawn after
opening time without approval of the CITY based on a written acceptable reason.
1.9 The City is exempt from State Sales Tax and Federal Excise Tax. Do not include tax in response.
1.10 The City reserves the right to accept or reject all or any part of response,waive minor technicalities
and award the response to best serve the interests of the City. Split awards may be made at the
sole discretion of the City.
1.11 Consistent and continued tie responses could cause rejection of responses by the City and/or
investigation for antitrust violations.
1.12 Telephone, facsimile, and electronically transmitted responses are not acceptable in response to
the solicitation.
1.13 CAUTION: Solicitation invitation allows sufficient time for receipt of the preferred mail response.
The City shall not be responsible for responses received late, illegible, incomplete, or otherwise
non-responsive.
• 1/
Exh� itf`27
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item: 885-16
August 2016
2.SPECIFICATION:
2.1 Any catalog, brand name or manufacturer's reference used in the solicitation is descriptive only
(not restrictive), and is used to indicate type and quality desired. Responses on brands of like
nature and quality will be considered unless advertised under the provisions of Section 252.022
of the Texas Local Government Code. If other than brand(s)specified is offered,illustrations and
complete descriptions of product offered are requested to be made a part of the response. If
respondent takes no exceptions to specifications or reference data in response, respondent will
be required to furnish brand names, numbers,etc., as specified in the solicitation.
2.2 All items on the solicitation shall be new, in first class condition, including containers suitable for
shipment and storage, unless otherwise indicated in the solicitation. Verbal agreements to the
contrary will not be recognized.
2.3 Samples, when requested, must be furnished free of expense to the City. If not destroyed in
examination,they will be returned to the respondent, on request, at respondent expense.Each
example should be marked with respondents' name and address, City solicitation number and
code. Do not enclose in or attach to response.
2.4 The City will not be bound by any oral statement or representation contrary to the written
specifications of the solicitation.
2.5 Manufacturer's standard warranty shall apply unless otherwise stated in the solicitation.
3. TIE RESPONSES: In case of tie responses,the award will be made in accordance with Section 271.901
of the Texas Local Government Code.
4. DELIVERY:
4.1 Response shall show number of days required to place material in City's designated location under
normal conditions.Failure to state deliver time obligates respondent to complete delivery in fourteen
(14) calendar days. Unrealistically short or long delivery promises may cause response to be
disregarded. Consistent failure to meet delivery promises without valid reason may cause removal
from Vendor list. (See 4.2 following.)
4.2 If delay is foreseen, Vendor shall give written notice to the City. The City has the right to extend
delivery date if reasons appear valid. Vendor shall keep the City advised at all times of status of
order. Default in promised delivery(without acceptable reasons) or failure to meet specifications,
authorizes the City to purchase supplies elsewhere and charge full increase, if any, in cost and
handling to defaulting Vendor.
4.3 No substitutions or cancellations permitted without written approval of the City.
4.4 Delivery shall be made during normal working hours only, unless prior approval for late delivery
has been obtained from the City, unless otherwise specified in the solicitation.
5. INSPECTION AND TESTS:All goods will be subject to inspection and test by the City to the extent
practicable at all times and places.Authorized City personnel shall have access to any supplier's
place of business for the purpose of inspecting merchandise.Tests may be performed on samples
submitted with the response or on samples taken from regular shipments. If the products tested fail
to meet or exceed all conditions and requirements of the specifications,the cost of the sample used
and the cost of the testing shall be borne by the supplier. Goods, which have been delivered and
rejected in whole or in part, may, at the City's option, be returned to the Vendor or held for
disposition at Vendor's risk and expense. Latent defects may result in revocation of
acceptance.
i
I
ExhiWitolA
i
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item: 885-16
August 2016
6.AWARD OF AGREEMENT:A response to a solicitation is an offer to contract with the City based upon
the terms, conditions, and specifications contained in the solicitation. Responses do not become
agreements or purchase orders unless and until they are accepted by the City through its designees
and an agreement or a purchase order is issued.The agreement or purchase order shall be governed,
construed,and interpreted under the Charter of the City and the laws of State of Texas.All agreements
or purchase orders are subject to the approval of the City Council or Manager.
7.PAYMENT:Vendor shall submit three(3)copies of an invoice showing the agreement or purchase order
number on all copies.
8. PATENTS AND COPYRIGHTS: The Respondent agrees to protect the City from claims involving
infringements of patents or copyrights.
9. RESPONDENT ASSIGNMENTS: Respondent hereby assigns to the purchaser any and all claims for
overcharges associated with this agreement,which arise under the antitrust laws of the State of Texas.
TX,Bus.And Comm.Code Ann. Sec. 15.01, et seq. (1967).
10. RESPONDENT AFFIRMATION:
10.1 Signing the response with a false statement is a material breach of agreement and shall void the
submitted response or any resulting agreements, and the Respondent shall be removed from all
Vendor lists. By signature hereon affixed,the respondent hereby certifies that:
10.2 The respondent has not given,offered to give,nor intends to give any time hereafter any economic
opportunity,future employment,gift,loan,gratuity,special discount,tip,favor,or service to a public
servant in connection with the submitted response.
10.3 The respondent is not currently delinquent in the payment of any debt owed the City.
10.4 Neither the respondent nor the firm, corporation, partnership, or any entity represented by the
respondent, or anyone acting for such firm,corporation,or entity has violated the antitrust laws of
this State codified in Section 15.01 et.Seq.Texas Business and Commercial Code,or the Federal
Antitrust Laws, nor communicated directly or indirectly the response made to any competitor, or
any other person engaged in such line of business.
10.5 The respondent has not received compensation for participation in the preparation of the
specification for the solicitation.
11. NOTE TO RESPONDENTS:Any terms and conditions attached to response will not be considered
unless the respondent specifically references them on the front of the response form. WARNING:
Such terms and conditions may result in disqualification of the response (e.g. responses with the
laws of a state other than Texas requirements for prepayment, Limitations on remedies, etc.)The
City of Round Rock can only accept responses which contain all the terms and conditions of its formal
solicitation;in particular,all respondents'affirmations and certifications must be included.Submission
of responses on forms other than City's form may result in disqualification of your response.
12. INQUIRIES: Inquiries pertaining to Solicitation invitations must give Solicitation number, codes, and
opening date.
Exhl' o "
f 2-*
i
I
i
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
Class/Item:885-16
August 2016
ATTACHMENT A: BID FORM
PURCHASING DEPARTMENT
221 E. Main Street• Round Rock,Texas 78664-5299
Solicitation Number: 16-013 Tax ID Number:
Solicitation Name: Water Treatment 74 3104940
z0 Chemicals G
N H Business Name:
Opening Date: September 8,2016 CH D30E CIMICALS US LLC
O Opening Time: 3:00 p.m., CST O Address:
z Opening Location: City of Round Rock 4 i 90 EAST HAr sEY ROAD
O Attn:City Hall 1ST Floor z ,
F. Receptionist Desk AWA I Address: PARSIPPANY, NJ 07054
d 221 E. Main Street z l
URound Rock,TX Contact: Rr.T2AB= RYNo
C78664 Telephone: 80o 441 2659
Email:bids@chemtradelogis:ics.com
In order to do business with the City of Round Rock you must be registered with the City's Vendor Database. To
register,go to: https:/lroundrock.munisselfservice.com/Vendors/defauIt.aspx
Item# Description Quantity Unit of Unit Price Extended Price
Measure
1 Chlorine(Ton Cylinders)or equivalent 150 Ton No BID
2 Chlorine(150 Ib.Cylinders)or equivalent 250 Each NO BID
3 Liquid Aluminum Sulfate(Sample testing 50 DT $216.00/ $10,800.00
required)or equivalent DRY TON
4 Liquid Aluminum Sulfate with 2%Copper Sulfate 500 DT $392.53/DRY $196,265.00
(Sample testing required)orequivalent TON
5 Aluminum Chlorohydrate or equivalent 69pT $764.00/= $52,716.00
6 Hydrofluosilicic Acid 23%or equivalent 40 Ton NO BID
7 Liquid Cationic Polymer, 55 Gallon Drums, NO BID
(Sample testing required)orequivalent 108,000 Lbs.
8 Sodium Permanganate 20%,tote or equivalent 25,550 Lbs. NO BID
Belt Press Polymer, 55 Gallon Drums(Sample
9 testing required)or equivalent 550 Gallon NO BID
*PRODUCT BMGBID ON FOR ITBki N MIa 4 IS
E x ' ]'� �t A I FMNMDE C�CArs CLAR+ION CS8
1�`Df 27 — PRODUCT BEING BID ON FOR NMH ER 5 IS
CHE ME CMaCAIS HYM+ION 1090.
i
I ,
City of Round Rock
Water Treatment Chemicals
I IFB No. 16-013
I Class/Item:885-16
August 2016
ATTACHMENT A: BID FORM
(CONTINUED)
10 Liquid Ammonium Sulfate(LAS)or equivalent 46,400 Gallon
$0.88/GAL $40,832.00
11 Sodium Hydroxide(17%),tote or equivalent 3,025 Gallon No BID
*FOR CONVERSION PURPOSE ONLY, PRICE EQUATES TO $$176.00/TON
By the signature hereon affixed,the Respondent hereby certifies that neither the respondent nor the entity represented by the respondent,or
anyone acting for such entity has violated the antitrust laws of this State,codified in Section 15.01 et seq.,Texas Business and Commerce Code,or
the Federal antitrust laws,nor communicated directly or indirectly,the response made to any competitor or any other person engaged in such line of
business. Further,by signing and submitting this response the Respondent acknowledges:
• That they have read and fully understand the solicitation and accept all terms and conditions set forth herein.
• The respondent is not currently delinquent in the payment of any debt owed to the City.
Sealed response envelope shall be clearly marked with solicitation name,solicitation number and name of responding entity.
The agreement or purchase order resulting from this solicitation may qualify for Inter-local or Cooperative Contracting(Piggybacking)per the terms
outlined in Part III#8 of this solicitation. If applicable,do you agree to"piggyback"purchasing from other governmental agencies?
Yes No Response shall include one(1)signed original and two(2)copies of bid response.
ELIZABETH RYNO � ✓ti. --L- AUGUST 30, 2016
Printed Name AuthorizecVSlgnature Date
Failure to sign response will disqualify response.
�x
ATTR MIENT A
GRADE CMMCAIS US LLC HAS NOT BEEN CONVICTED OF OR FOUND LIABLE FOR ANY ACT PROHIBITED BY
STATE OR FEDERAL LAW IN ANY JURISDICTION, INVOLVING CONSPIRACY OR COLLUSION WITH RESPECT TO
BIDDING ON ANY PUBLIC CONTRACT. CEEHIRADE CMMCAT CORPORATION HAS APPLIED FOR LENMCY
PURSUANT TO THE DEPAMI[ENT OF JUSTICE ANTITRUST DIVISION'S CORPORATE LENIENCY POLICY, AND
CHETRADE CHEMICALS COPRORATION, ITS AFFILIATES, SUBSIDIARIES, OFFICERS, DIRECTORS AND
E29PIDYEES ARE COOPERATING WITH THE DEPAR'CPII NT OF JUSTICE PURSUANT TO THE DOJ ANTITRUST
DIVISION'S CORPORATE LEfdIEACY POLICY, WITH RESPECT TO AN ANTITRUST INVESTIGATION OF THE ALU?IINOH
SULFATE MARKET.
PRICING MAY BE ADJUSTED FOR FREIGHT DIFFERENTIALS.
Exi"* itof2'7A"
City of Round Rock
Water Treatment Chemicals
IFB No. 16-013
I Class/Item:885-16
August 2016
ATTACHMENT B:
RESPONDENT'S REFERENCE SHEET
PLEASE COMPLETE AND RETURN THIS FORM WITH THE SOLICITATION RESPONSE
SOLICITATION NUMBER: IFB-16-013 WATER TREMIOT CMIMUS
RESPONDENT'S NAME: ELIZABETH MO DATE: AUGUST 30, 2016
Provide the name, address, telephone number and e-mail of at least three(3)Municipal and/or
Government agencies or firms of comparable size that have utilized similar service within the last two(2)
years. City of Round Rock references are not applicable. References may be checked prior to award.
Any negative responses received may result in disqualification of submittal.
1. Company's Name PLEASE SEE ATTACHED
Name of Contact
Title of Contact
E-Mail Address
Present Address
City, State,Zip Code
Telephone Number ( ) Fax Number:( )
2. Company's Name
Name of Contact
Title of Contact
E-Mail Address
Present Address
City, State,Zip Code
Telephone Number ( ) Fax Number:( )
3. Company's Name
Name of Contact
Title of Contact
E-Mail Address
Present Address
City, State,Zip Code
Telephone Number ( ) Fax Number:( )
FAILURE TO PROVIDE THE REQUIRED INFORMATION WITH THE SOLICITATION RESPONSE MAY
AUTOMATICALLY DISQUALIFY THE RESPONSE FROM CONSIDERATION FOR AWARD.
Exhibitofz�"
i
N
Water Chemicals Group 90 East Halsey Road
Parsippany,NJ 07054
Tel:973-515-0900
Fax:973-5154461
REFERENCES:
The following is a list of customers Chemtrade Chemicals US LLC currently supplies
with the related products being bid on for the 2015 - 2016 calendar years (and prior).
Chemtrade Chemicals has also been a long supplier of Liquid Ammonium Sulfate to the
City of Round Rock. If your require additional references or more specific information is
needed please contact our office at 800-441-2659.
City of Corpus Christi
1201 Leopard Street,4th Floor
Corpus Christi,TX 78469
Contact: Gerald Goodwin
Email: GeraldGo@cctexas.com
Phone: (361) 826-3173
City of Mission
1201 East 8th
Mission,TX 78572
Contact: Glorina Flores
Email: gflores@missiontexas.us
Phone: (956)580-8667
City of Laredo
1110 Houston Street
City Hall-3rd Floor
Laredo,TX 78040
Contact: Enrique Aldape III
Email: Ealdape@ci.laredo.tx.us
Phone: (956)790-1814
CHEMTRADE CHEMICALS US LLC. EX111DIT "A"
i
City of Round Rock
Water Treatment Chemicals
IF8 No. 16-013
Class/Item:885-16
August 2016
ATTACHMENT C:
ADDENDUM ACKNOWLEDGMENT FORM
NOTE: If multiple addendums have been issued, respondents may complete and return this attachment
with their proposal in place of the individual addendums to be submitted. Failure to provide either this form
or the individual addendums with signatures may result in disqualification of the proposal.
Addenda Acknowledgment: The undersigned acknowledges the receipt of the following Addenda:
Addendum#: 1 (one) Dated: 8/29/2016
Addendum#: Dated:
Addendum#: Dated:
Addendum#: Dated:
Addendum#: Dated:
Respondent(Company): CREB RADE CHEMICALS US LLC
Signature(in ink): c "`
Name(Typed/printed): ELIZABETH RYNO
Title: MARKING SPECIALIST Date: AUGUST 30, 2016
Exhj*PIC2��
ROUND ROCK TEXAS
PURCHASING DIVISION
CITY OF ROUND ROCK
IFB NO. 16-013
WATER TREATMENT CHEMICALS
Solicitation: 16-013 Addendum No. 1 Date: 08/29/2016
The following response is in reference to all questions submitted for IFB No. 16-013 for Water
Treatment Chemicals by the deadline on Thursday, August 25, 2016, @ 5:00 p.m.
Question No. 1: Do we have to be HUB ZONE Company to quote this?
Answer: No.
Question No. 2: Follow up question to HUB Zone Company. Will you consider us for an award if I
quote this requisition?
Answer: The award will be based on the best value to the City as stipulated in the IFB No. 16-013
Water Treatment Chemicals, Part III, Schedule and Response Instructions, 4. Best Value Evaluation
Criteria, on page 10 of 27.
Question No. 3: Can you please tell me what product is being used for the coagulant aid and belt
press polymer? Also, who is supplying the products?
Answer: The water treatment plant coagulant aid currently in use is WC 9923 supplied by Brenntag
Southwest, Inc. The belt press polymer has not been in regular use since 2010. The product typically
used is FBS 5800 supplied by Fort Bend Services, Inc.
Question No. 4: Will you please provide a copy of the previous bid tabulation, pricing, and chemical
list from five (5) years ago?
Answer: For a copy of the previous bid tabulation, please submit an open records request at:
http://www roundrocktexas gov/departments/administration/city-clerk/open-records-center/
Question No. 5: In reference to the request for products and pricing, may I have the following as it
pertains to items #7 and #9. What are the specific names of the products in use today?
Answer: The water treatment plant coagulant aid currently in use is WC 9923 supplied by Brenntag
Southwest, Inc. The belt press polymer has not been in regular use since 2010. The product typically
used is FBS 5800 supplied by Fort Bend Services, Inc.
Exhibit "A"
2..:.,5 n�4-
ROUND ROCK TEXAS
PURCHASING DIVISION
CITY OF ROUND ROCK
IFB NO. 16-013
WATER TREATMENT CHEMICALS
Solicitation: 16-013 Addendum No. 1 Date: 08/2912016
Question No. 6: Normally, how many drums of each are.delivered per shipment?
Answer: Water treatment plant polymer is typically delivered in lots of 20 drums. Belt press polymer
is typically delivered in lots of 4 drums.
Summit Chemicals
Question No. 7: For Item 5 (Aluminum Chlorhydrate), does the-item of measure DT stand for dry ton?
Answer: Yes
Question No. 8: Would it be possible to obtain the bid tab and date of bid for the last time the
Aluminum Chlorohydrate was bid?
Answer: The City has never bid Aluminum Chlorohydrate. Therefore, no bid tab exits.
Question No. 9: In reference to liquid aluminum sulfate on page 14, Liquid Aluminum Sulfate,
Section 1.8, we can say that our tanks are dedicated to water treatment chemicals. We can provide
wash out tickets to certify the cleanliness if possible. Does the City of Round Rock require dedicated
tankers for all of their chemical requirements?
Answer: The city requires that the delivery of liquid aluminum sulfate be in a clean, properly
identified and labeled truck used only for the transport and delivery of liquid aluminum sulfate. The
city will accept a certification of cleanliness in lieu of dedicated tanker trucks as long as other
elements of the chemical specification are met.
Question No. 10: The bid states no subcontractors -Would this statement apply to transportation of
the chemical?
Answer: No subcontractors applies to all chemical products, however, not transportation of the
chemicals.
Question No. 11: Does the manufacturer have to be the owner of the tank trucks or can a common
carrier be used?
Answer: No. Common carrier may beMiblt "Aft
I
i
ROUND ROCK TEXAS
PURCHASING DIVISION
I
CITY OF ROUND ROCK
IFB NO. 16-013
WATER TREATMENT CHEMICALS
Solicitation: 16-013 Addendum No. 1 Date: 08/2912016
Question No. 12: Is the agreement term as outlined on page 6 of 27, in Part I, General, 11.
Agreement Term, 11.1 for six (6) or sixty (60) months?
Answer: Please change Part I, General, 11. Agreement Term, 11.1to read as follows:
11.1 The term of the Agreement shall begin from dated of award and shall remain in full force for a
total of sixty i60) months.
Question No. 13: Would you advise regarding the current pricing for chemical products and current
suppliers listed in IFB No. 16-013 for Water Treatment Chemicals?
Answer: For a copy of the current pricing and supplier for chemical products, please submit an open
records request at: http://www roundrocktexasgov/departments/administration/city-clerk/open-
records-center/
Approved by: Date:
Mike Schurwon, CPPB, CTPM
Purchaser
By the signatures affixed below this addendum is hereby incorporated Into and made a part of the
above referenced solicitation.
ACKNOWLEDGED:
CMMZADE CHURCALS US LLC � 8/29/2016
Vendor Authorized Signature Date
ELIZABM MO
RETURN ONE COPY SIGNED COPY OF THIS ADDENDUM TO THE PURCHASING OFFICE WITH
YOUR SEALED PROPOSAL. FAILURE TO DO SO MAY AUTOMATICALLY DISQUALIFY YOUR
RESPONSE FROM CONSIDERATION FOR AWARD.
Exhibit "A"
Water Chemicals Group 90 East Halsey Road
Parsippany,NJ 07054
Tel:973-515-0900
Fax:973-5154461
City of Round Rock
Bid Number: 16-013 -Water Treatment Chemicals
Bid Opening: September 8,2016 @ 3:00 pm
DELIVERY REQUIREMENTS
LIQUID ALUMINUM SULFATE
DELIVERY: 2-3 DAYS AFTER RECEIPT OF ORDER
LIQUID ALUMINUM SULFATE W/2% COPPER (CLAR+ION CS8)
3-4 DAYS AFTER RECEIPT OF ORDER
ALUMINUM CHLOROHYDRATE (HYPER+ION 1090)
3-5 DAYS AFTER RECEIPT OF ORDER
LIQUID AMMONIUM SULFATE
3-4 DAYS AFTER RECEIPT OF ORDER
If you have any questions or concerns please feel free to contact me.
Sincerely,
Ebi zadye4+1, Thyv Q-
Marketing Specialist
Ph: 800 631-8050 x 1943
bids@chemtradelogistics.com
Exhibit "A"
Water Chemicals Group \ 90 East Halsey Road
Parsippany,NJ 07054
Tel:973-515-0900
Fax:973-5154461
ORDER CONTACT, EMERGENCY CONTACT AND TECHNICAL
SERVICE INFORMATION
Chemtrade Chemical's Normal operating business hours are Monday—Friday 8:00
AM to 5:00 PM E.S.T.
To place orders, contact your Customer Service Representative:
Krish Thiru"maran
1-844-204-9675
E-mail: cssorders@chemtradelogistics.com
Fax: (647) 255-3655
After normal business hours,for emergencies and orders please call
1-647--531-9709 and the on-call Customer Service Representative will be
available to assist you. This number will also be provided if you call the regular
Customer Service line.
For Technical Service please call (315) 478-2323 or visit our website at:
http://www.chemtradelogistics.com or http://www.generalchemical.com
Corporate/Sales Office
Chemtrade Chemicals US LLC.
90 East Halsey Road
Parsippany,NJ 07054
Paul Peters, Business Manager Robert Naranjo, Rep - Sales
Phone: (256) 318-4452 Phone: (360) 440-0293
Email: Email:
PPetersO,chemtradelogisics.com RNaranio@a,,ChemtradeLogistics.com
For Bid/Contract Information:
Elizabeth Ryno
Phone: (800) 441-2659
Direct: (973) 515-1858
Fax: (973) 515-4461
BID S@chemtradelogisties.com
Bryno@chemtradelogistics.com
Exhibit "A"
i
DELEGATION OF AUTHORITY
I,Mark Davis,President and Chief Executive Officer of Chemtrade Chemicals US LLC,a Delaware
limited liability company("Chemtrade"),do hereby delegate and appoint the following agents of Chemtrade
to execute all municipal contracts and instruments, including bids,proposals and quotations,which in the
ordinary course of business are processed by the Marketing Group of the company:
Parul KachMa-Patel Lisa Brownlee Paul Peters Elizabeth Ryno
Leilina Gossa Ann Hopler Andrew Hoffman Michele Schroeher
Set forth below is a certified copy of the resolution of Chemtrade authorizing such action.
Dated as of the 315`day of January,2016. 44��
Mark Davis
President and Chief Executive Officer
CERTIFICATE OF SECRETARY
1,Susan Pare,hereby certify that I am the Corporate Secretary of Chemtrade Chemicals US LLC
("Chemtrade")and that set forth below is a true and correct copy of the resolution of the Board of Managers
of Chemtrade,adopted by unanimous written consent as of the 10'''day of November,2003 and that the same
has not been modified or revoked and is on the date hereof in full force and effect:
RESOLVED that any officer of the Company be,and he hereby is,authorized to
delegate,with the right of further delegation,to any other officer,employee or agent of
the Company,all or any part of the authority granted to them by the Board of Managers;
and that any such delegations may be general or specific and subject to such limitations
and restrictions as the delegating officer shall determine.
I FURTHER CERTIFY that Mark Davis is the duly elected President and Chief Executive Officer of
Chemtrade and holds such offices on the date hereof,that Mr.Davis,in his capacity as President and Chief
Executive Officer is authorized to represent and bind Chemtrade in all ma ers including,but not limited to,
contracts and that set forth below is the genuine signature of such office .
Mark Davis
President and Chief Executive Officer
IN WITNESS WHEREOF, I have hereunto set my hand and have caused the seal of the Company to
be affixed effective this 315`day of January,2016.
Z�� ,
Seal Susan Parti
Corporate Secretary
/� 90 East Halsey Road
Exhibit „A"
Parsippany,8004 -2654
Tel:800-441-2659
H E TRA DE
WATER TREATMENT GROUP
90 EAST HALSEY ROAD,
PARSIPPANY,NJ 07054
TEL: (973)515-0500
FAX: (973)5154461
LIQUID ALUMINUM SULFATE
Chemtrade Chemicals certifies that all grades of Aluminum Sulfate as produced by
our manufacturing locations will meets National Sanitation Foundation Standard
60 and ANSI/AWWA B 403-09 standard in every respect.
Material Safety Data Sheet, NSF Certification and related technical information is
attached for review.
Eliza eth Ryno
Marketing Specialist
7 Exhibit "A"
/pL[�[C �� � 0\/�
x^Ll ��[L
T� hiip://vwvv/chendnzdelogbtics.conn
Liquid Alum
&rt&�r IT2 Rci0TiG!G1
Liquid Alum in a dear, light gveen, slight yellow, brown, amber ororange-like tinted solution. It is a
cationic inorganic coagulant and flocculant suitable for industrial and municipal water and wastewater
treatment applications.
0SF/ANS1 Standard 80: Drinking Water Chemicals -Heabh Eff»ote| Certified ,
TTMCALPR0P[FW[[1498-�
Formula: Aqueous solution of aluminum sulfate
O.A.S. 1OO43'O1-3(Aluminum sulfate)
pH (neat) 1.4'2.6
Specific Gravity @21"C(7U"F) 1.30-1.35
Freezing Point -16-C(4-F)
Density, lbs./gal., US 10.8-11.3
Aluminum as Al, 96 4.2-4.5
Aluminum as A1203, Y6 8.0-8.4
Aluminum uoA|2(SO4)n"14H2O(Dry A|um).96 40'49
P_DLOD'OC.:l78�11M'
Municipal and industrial water and wastewater treatment for the removal of turbidity,color,suspended
solids and phosphorus. Sludge compaction and volume reduction. Lagoon treatment. Oily wastewater
clarification and dissolved air flotation. Emulsion breaking. Fixing rosin sizes on paper fibers. Paper
machine drainage and retention aid. Paper machine pitch control.
Bulk transport Bulk car 2T5USgal.one way container 55U8gal.plastic drum
S[{[pP IN1,C-5 ��0;UL& �0- Y/%1)50-�\
Proper Shipping Name:Corrosive Liquid,Acidic, Inorganic, N.O.S.(Contains Aluminum Sulfate)
Hazard Class: D |DNumber: UND2G4 Packing Group: III
The USEPA reportable quantity(RC>)for aluminum sulfate io5.000lbs.
Causes serious eye damage. Dunot breathe vapors, mist urspray. Wash hands,forearms,and other
exposed areas thoroughly after handling. Wear eye protection, protective clothing,and protective gloves.
Anyone procuring,using ordisposing cf these products nrtheir containers must befamiliar with the
appropriate safety and handling precautions. Such information may befound inthe Safety Data Sheets
(SDS)for these products oryou may contact Chomtnodnot410'4QG'585G. /nthe event nfenemergency
with these products,call the 24 hour Emergency Number: USA(CHEMTREC)800-424-9300 or Canada
(CANUTEC)O13'99G'666G. For additional information contact:
Syracuse Technical Center Water Treatment Chemicals
315'478'2323or800'255'7580 Customer Service 844'2O4'0875
oHs'5001p'1 Revision Date:October er.uo10
AV Infor"ation.stalemorts,data,advice andlor recommendations,Including,vvithout Imitation,those rotating to storage.loadingrunloading,piping andbansportation(collectively Warred
herein as Infotnmition')
i
i
Liquid Alum
C I F r P) Safety Data Sheet
_ According to federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Revision Date:08/09/16 Dale of Issue:05/01/15 Version:1.4
SECTION 1:IDENTIFICATION
Product Identifier
Product Form:Mixture
Product Name:Liquid Alum
Alternate Name:Aluminum Sulfate,Liquid
Formula:AI2(SO4)3•14 H2O(Dry Equivalent)
Intended Use of the Product
Alum is used as a coagulating agent in municipal and industrial water and wastewater treatment and as an additive in papermaking.
Name,Address,and Telephone of the Responsible Party
Manufacturer
CHEMTRADE LOGISTICS INC.
155 Gordon Baker Road
Suite 300
Toronto,Ontario M21-1 3N5
For SDS Info:(416)496-5856
www.chemtradelogistics.com
Emergency Telephone Number
Emergency Number Canada:CANUTEC+1-613-996-6666/US:CHEMTREC+1-800-424-9300
Chemtrade Emergency Contact:(866)416-4404
For Chemical Emergency,Spill,Leak,Fire,Exposure,or Accident,call CHEMTREC—Day or Night
SECTION + A• ! 1 + •
Classification of the Substance or Mixture
Classification(GHS-US)
Met.Corr.1 H290
Skin Corr.1A H314
Eye Dam.1 H318
Aquatic Acute 3 H402
Full text of H-phrases:see section 16
Label Elements
GHS-US Labeling
Hazard Pictograms(GHS-US)
GH505
Signal Word(GHS-US) Danger
Hazard Statements(GHS-US) H290-May be corrosive to metals
H314-Causes severe skin burns and eye damage
H318-Causes serious eye damage
H402-Harmful to aquatic life
Precautionary Statements(GHS-US) P234-Keep only in original container.
P260-Do not breathe vapors,mist,or spray.
P264-Wash hands,forearms,and other exposed areas thoroughly after handling.
P273-Avoid release to the environment.
P280-Wear eye protection,protective clothing,protective gloves.
P301+P330+P331-If swallowed:rinse mouth.Do NOT induce vomiting.
P303+P361+P353-If on skin(or hair):Take off immediately all contaminated clothing.
Rinse skin with water/shower.
P304+P340-IF INHALED:Remove person to fresh air and keep at rest in a position
comfortable for breathing.
P305+P351+P338-IF IN EYES:Rinse cautiously with water for several minutes.Remove
Revision Date:08/09/16 EN(English US) SDS#:CHE-50015 1/7
Exhibit "A"
{
i
I
Liquid Alum
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
contact lenses,if present and easy to do.Continue rinsing.
P310-Immediately call a doctor.
P321-Specific treatment(see section 4 on this SDS).
P363-Wash contaminated clothing before reuse.
P390-Absorb spillage to prevent material damage.
P405-Store locked up.
P406-Store in corrosive resistant container with a resistant inner liner.
P501-Dispose of contents/container in accordance with local,regional,national,and
international regulations.
Other Hazards
Other Hazards Not Contributing to the Classification: Exposure may aggravate those with pre-existing eye,skin,or respiratory
conditions.
Unknown Acute Toxicity(GHS-US) Not available
SECTION 3::COMPOSITION/IN FORMATION ONINGREDIENTS
Name Product identifier %(w/w) Classification(GHS-US)
Water (CAS No)7732-18-5 30-60 Not classified
Sulfuric acid,aluminum salt(3:2) (CAS No)10043-01-3 30-60 Met.Corr.1,H290
Eye Dam.1,H318
Aquatic Acute 3,H402
*As AI2(SO4)3•14 H2O(Dry Aluminum Sulfate).
The specific chemical identity and/or exact percentage of composition have been withheld as a trade secret(29 CFR 1910.1200).
A range of concentration as prescribed by the Controlled Products Regulations has been used where necessary,due to varying
composition.
Full text of H-phrases:see section 16
!SECTION.4:
Description of First Aid Measures
General:Never give anything by mouth to an unconscious person.If you feel unwell,seek medical advice(show the label if possible).
Inhalation:Remove to fresh air and keep at rest in a position comfortable for breathing.Obtain medical attention if breathing
difficulty persists.
Skin Contact:Rinse immediately with plenty of water.Obtain medical attention if irritation develops or persists.
Eye Contact:Rinse cautiously with water for at least 15 minutes.Remove contact lenses,if present and easy to do.Continue rinsing.
Obtain medical attention.
Ingestion:Do NOT induce vomiting.Rinse mouth.Immediately call a POISON CENTER or doctor/physician.
Most Important Symptoms and Effects Both Acute and Delayed
General:Causes severe skin burns and eye damage.
Inhalation: May cause respiratory irritation.
Skin Contact:Redness.Pain.Serious skin burns.Blisters.
Eye Contact:Redness.Pain.Blurred vision,Severe burns.Causes permanent damage to the cornea,iris,or conjunctiva.
Ingestion:Ingestion is likely to be harmful or have adverse effects.
Chronic Symptoms:None expected under normal conditions of use.
Indication of Any Immediate Medical Attention and Special Treatment Needed
If you feel unwell,seek medical advice(show the label where possible).
�SECTION.5: ,
Extinguishing Media
Suitable Extinguishing Media:Use extinguishing media appropriate for surrounding fire.
Unsuitable Extinguishing Media:Do not use a heavy water stream.Use of heavy stream of water may spread fire.
Special Hazards Arising From the Substance or Mixture
Fire Hazard:Not considered flammable but may burn at high temperatures.
Explosion Hazard:Product is not explosive.
Revision Date:08/09/16 EN I • • SDS#:CHE-5001S 2/7
j
Ligula Alum
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Reactivity: Hazardous reactions will not occur under normal conditions.Liquid alum may react with some metals,to give flammable,
potentially explosive hydrogen gas.Hydrogen gas can accumulate to explosive concentrations inside confined spaces.
Advice for Firefighters
Precautionary Measures Fire:Not available
Firefighting Instructions:Use water spray or fog for cooling exposed containers.In case of major fire and large quantities:Evacuate
area.Fight fire remotely due to the risk of explosion.
Protection During Firefighting:Do not enter fire area without proper protective equipment, including respiratory protection.
Hazardous Combustion Products:Forms aluminum oxide,sulfur dioxide and/or sulfur trioxide at temperatures above 760°C
(140D°F)or when dry alum is encompassed in a fire involving other burning materials.
Other Information:Refer to Section 9 for flammability properties.
Reference to Other Sections
Refer to section 9 for flammability properties.
SECTION
Personal Precautions,Protective Equipment and Emergency Procedures
General Measures:Avoid all contact with skin,eyes,or clothing.Avoid breathing(dust,vapor,mist,gas).
For Non-Emergency Personnel
Protective Equipment:Use appropriate personal protection equipment(PPE).
Emergency Procedures:Evacuate unnecessary personnel.
For Emergency Personnel
Protective Equipment:Equip cleanup crew with proper protection.
Emergency Procedures:Stop leak if safe to do so.Eliminate ignition sources.Ventilate area.
Environmental Precautions
Prevent entry to sewers and public waters.Notify authorities if liquid enters sewers or public waters.
Methods and Material for Containment and Cleaning Up
For Containment:Contain any spills with dikes or absorbents to prevent migration and entry into sewers or streams.
Methods for Cleaning Up:Collect spillage.Dispose in a safe manner in accordance with local/national regulations.
Reference to Other Sections
See Heading 8.Exposure controls and personal protection.
• ANDSTORAGE
Precautions for Safe Handling
Hygiene Measures:Handle in accordance with good industrial hygiene and safety procedures.Wash hands and other exposed areas
with mild soap and water before eating,drinking or smoking and when leaving work.Use good housekeeping practices during
storage,transfer,handling,to avoid excessive dust accumulation.Protect from moisture.
Conditions for Safe Storage,Including Any Incompatibilities
Technical Measures:Comply with applicable regulations.
Storage Conditions:Store in a dry,cool and well-ventilated place.Keep container closed when not in use. Keep/Store away from
direct sunlight,extremely high or low temperatures and incompatible materials.
Incompatible Materials:Strong bases.
Special Rules on Packaging:Store in original container or corrosive resistant and/or lined container.
Specific End Use(s)
For professional use only.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Control Parameters
For substances listed in section 3 that are not listed here, there are no established Exposure limits from the manufacturer,supplier,
importer,or the appropriate advisory agency including:ACGIH(TLV),NIOSH(REL),OSHA(PEL),Canadian provincial governments,or
the Mexican government.
Exposure Controls
Appropriate Engineering Controls:Ensure adequate ventilation,especially in confined areas.Emergency eye wash fountains and
safety showers should be available in the immediate vicinity of any potential exposure.Ensure all national/local regulations are
observed.
Personal Protective Equipment:Protective goggles.Gloves.Protective clothing.
Revision Date:08/09/16 EN I • • SDS#:CHE-50015 3/7
i
Liquid Alum
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Materials for Protective Clothing:Chemically resistant materials and fabrics.
Hand Protection:Wear chemically resistant protective gloves.
Eye Protection:Chemical goggles or safety glasses.
Skin and Body Protection:Wear suitable protective clothing.
Respiratory Protection:Use NIOSH-approved dust mask if dust has the potential to become airborne.
Environmental Exposure Controls:Do not allow the product to be released into the environment.
Consumer Exposure Controls:Do not eat,drink or smoke during use
KCTION PHYSICALAND CHEMICAL'PROPERTIES
Information on Basic Physical and Chemical Properties
Physical State Liquid
Appearance Clear,light green,slight yellow,brow,amber,or orange like tint
Odor Odorless
Odor Threshold Not available
pH 1.4-2.6
Melting Point Not applicable
Freezing Point -15.56'C(47)
Boiling Point 101•C(213.80"F)
Flash Point Not flammable
Auto-ignition Temperature Not available
Decomposition Temperature Not available
Flammability(solid,gas) Not applicable
Lower Flammable Limit Not available
Upper Flammable Limit Not available
Vapor Pressure Not available
Relative Vapor Density at 20°C Not available
Relative Density Not available
Specific Gravity 1.30-1.35
Solubility Water:Completely miscible in water.
Partition Coefficient:N-Octanol/Water Not available
Viscosity Not available
Explosion Data—Sensitivity to Mechanical Impact Not expected to present an explosion hazard due to mechanical impact.
Explosion Data—Sensitivity to Static Discharge Not expected to present an explosion hazard due to static discharge.
• •:STABILITY AND REACTIVITY
Reactivity: Hazardous reactions will not occur under normal conditions.Liquid alum may react with some metals,to give
flammable,potentially explosive hydrogen gas.Hydrogen gas can accumulate to explosive concentrations inside confined spaces.
Chemical Stability: Stable under recommended handling and storage conditions(see section 7).
Possibility of Hazardous Reactions: Hazardous polymerization will not occur.
Conditions to Avoid: Direct sunlight.Extremely high or low temperatures. Ignition sources.Incompatible materials.Moisture.
Incompatible Materials: Strong bases.Metals.
Hazardous Decomposition Products: Oxides of aluminum.The decomposition products are corrosive and hazardous to health.
• OXICOLOGICAL INFORMATION
Information on Toxicological Effects-Product
Acute Toxicity:Not classified
LD50 and LCSO Data:Not available
Skin Corrosion/Irritation:Causes severe skin burns and eye damage.
pH:1.4-2.6
Serious Eye Damage/Irritation:Causes serious eye damage.
pH:1.4-2.6
Respiratory or Skin Sensitization:Not classified
Revision Date:08/09/16 ENJRWJ&If I UitSDSH:CHE-50015 4/7
Liquid Alum
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,20121 Rules and Regulations
Germ Cell Mutagenicity:Not classified
Teratogenicity: Not available
Carcinogenicity:Not classified
Specific Target Organ Toxicity(Repeated Exposure):Not classified
Reproductive Toxicity:Not classified
Specific Target Organ Toxicity(Single Exposure):Not classified
Aspiration Hazard:Not classified
Symptoms/Injuries After Inhalation:May cause respiratory irritation.
Symptoms/Injuries After Skin Contact:Redness.Pain.Serious skin burns.Blisters.
Symptoms/Injuries After Eye Contact:Redness.Pain.Blurred vision.Severe burns.Causes permanent damage to the cornea,iris,or
conjunctiva.
Symptoms/Injuries After Ingestion:Ingestion is likely to be harmful or have adverse effects.
Chronic Symptoms: None expected under normal conditions of use.
Information on Toxicological Effects-Ingredient(s)
LD50 and LC50 Data:
Water(7732-18-5)
LD50 Oral Rat >90000 mg/kg
s e o � e • i • e
Toxicity Not classified
Persistence and Degradability Not available
Bioaccumulative Potential Not available
Mobility in Soil Not available
Other Adverse Effects
Other Information:Avoid release to the environment.
SECTION e • c e eIONS.
Waste Disposal Recommendations:Dispose of waste material in accordance with all local,regional,national,and international
regulations.
Ecology—Waste Materials:Avoid release to the environment.
14.1 In Accordance with DOT
Proper Shipping Name CORROSIVE LIQUID,ACIDIC,INORGANIC,N.O.S.(CONTAINS ALUMINUM SULFATE)
Hazard Class
Identification Number UN3264
Label Codes 8
Packing Group III
ERG Number 154
14.2 In Accordance with IMDG
Proper Shipping Name CORROSIVE LIQUID,ACIDIC,INORGANIC,N.O.S.(CONTAINS ALUMINUM SULFATE)
Hazard Class 8
Identification Number UN3264
Packing Group III
Label Codes 8
EmS-No.(Fire) F-A
EmS-No.(Spillage) S-B
Revision Date:08/09/16 EN 1 1 SDSfl:CNE-50015 5/7
Liquid Alum
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
14.3 In Accordance with IATA
Proper Shipping Name CORROSIVE LIQUID,ACIDIC,INORGANIC,N.O.S.(CONTAINS ALUMINUM SULFATE)
Packing Group : III
Identification Number UN3264
Hazard Class 8
Label Codes 8
ERG Code(IATA) 8L
14.4 In Accordance with TDG
Proper Shipping Name CORROSIVE LIQUID,ACIDIC,INORGANIC,N.O.S.(CONTAINS ALUMINUM SULFATE)
Packing Group III
Hazard Class 8 '
Identification Number UN3264
Label Codes 8
019PRI-ill
US Federal Regulations
Liquid Alum
Clean Water Act
Ingredient Name Reportable Quantities
Aluminum sulfate(10043-01-3) 5000 lb(2270 kg)
Liquid Alum
SARA Section 311/312 Hazard Classes Timmediate(acute)health hazard
Water(7732-18-5)
Listed on the United States TSCA(Toxic Substances Control Act)inventory
Sulfuric acid,aluminum salt(3:2)(10043-03-3)
Listed on the United States TSCA(Toxic Substances Control Act)inventory
US State Regulations
Liquid Alum
Sulfuric acid,aluminum salt(3:2)(10043-01-3)
U.S.-Massachusetts-Right To Know List
U.S.-New Jersey-Right to Know Hazardous Substance List
U.S.-Pennsylvania-RTK(Right to Know)-Environmental Hazard List
U.S.-Pennsylvania-RTK(Right to Know) List
Canadian Regulations
Liquid Alum
WHMIS Classification Class D Division 2 Subdivision B-Toxic material causing other toxic effects
Class E-Corrosive Material
owl
gP 0.1
`
Q!oil
Water(7732-18-5)
Listed on the Canadian DSL(Domestic Substances List)
WHMIS Classification I Uncontrolled product according to WHMIS classification criteria
Sulfuric acid,aluminum salt(3:2)(10043-01-3)
Listed on the Canadian DSL(Domestic Substances List)
WHMIS Classification Class E-Corrosive Material
Revision Date:08/09/16 E Xi 1 1 SDSH:CHE-5001s 6/7
Liquid Alum
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations(CPR)and the SDS
contains all of the information required by CPR.
�SECTION . INFORMATION, t + OF • + • + • • • LASTBEVISION
Revision Date 08/09/16
Revision Summary Section 1
Other Information This document has been prepared in accordance with the SDS requirements of the OSHA
Hazard Communication Standard 29 CFR 1910.1200.
GHS Full Text Phrases:
Aquatic Acute 3 Hazardous to the aquatic environment-Acute Hazard Category 3
Eye Dam.1 Serious eye damage/eye irritation Category 1
Met.Corr.1 Corrosive to metals Category 1
Skin Corr.1A Skin corrosion/irritation Category 1A
H290 May be corrosive to metals
H314 Causes severe skin burns and eye damage
H318 Causes serious eye damage
H402 Harmful to aquatic life
Party Responsible for the Preparation of This Document
CHEMTRADE LOGISTICS,INC.
For SDS Info:(416)496-5856
Handle product with due care and avoid unnecessary contact. This information is supplied under U.S.OSHA'S"Right to Know"(29 CFR
1910.1200)and Canada's WHM1S regulations.Although certain hazards are described herein,we cannot guarantee these are the only
hazards that exist. The information contained herein is based on data available to us and is believed to be true and accurate but it is
not offered as a product specification.No warranty,expressed or implied,regarding the accuracy of this data,the hazards connected
with the use of the product,or the results to be obtained from the use thereof,is made and Chemtrade and its affiliates assume no
responsibility.Chemtrade is a member of the CIA (Chemistry Industry Association of Canada)and adheres to the codes and principles
of Responsible Care'.
F
p ` !r (,
C; k
Responsible Care' : I' es ion responsable'
Ovice:.++'ta•.shtnk.^F!1'i+t �` ��• I�Nsnp+p+eraazsuhlhc�j�wnt�
Chemtrade North Amerla SDS Template
Revision Date:08/09/16 EN"IX 1 SDS#:CRE-50015 7/7
I
CRF-1f1 P �' Cit
hiip://www..chemiradelogisiics,cQni
Liquid Ammonium Sulfate
C"RLC .UICI [ifitsfi k jUIIEH T
Liquid Ammonium Sulfate is an odorless,clear,faint yellow to amber colored liquid. It is an advanced
inorganic product suitable for industrial and municipal water and wastewater treatment applications.
NSF/ANSI Standard 60: Drinking Water Chemicals - Health Effects; Certified
Formula: Aqueous solution of ammonium sulfate
C.A.S. 7783-20-2(Ammonium sulfate)
pH(neat) 3.0-5.0
Specific Gravity @ 21°C(70°F) 1.216-1.228
Freezing Point Less than-12°C(10°F)
Density, lbs./gal., US 10.15-10.25
(NH4)2SO4,% 38-40
NH3 Equivalent,% 9.8-10.3
G'CtiC D,LYCT LnSH-S
Municipal and industrial water and wastewater treatment for disinfection as a source of ammonia in
chloramination. Disinfection byproduct control.
S-Lz«r-•rVCr c albl�u&rLllgetIa
Bulk transport Bulk car 275 US gal.one way container 55 US gal. plastic drum
04 LP V LG�C. L,.H&U,,L&-t[Ci:ISs (tic D:&-L /SLC-).-
Classification: Not regulated for transport
RQ: Not applicable
F11<0 DUCY SKFLA Y. 1LuL'C;LtiWYL•�''l [C L1:
Anyone procuring,using or disposing of these products or their containers must be familiar with the
appropriate safety and handling precautions. Such information may be found in the Safety Data Sheets
(SDS)for these products or you may contact Chemtrade at 416-496-5856. In the event of an emergency
with these products, call the 24 hour Emergency Number: USA(CHEMTREC)800-424-9300 or Canada
(CANUTEC)613-996.6666. For additional information contact:
Syracuse Technical Center Water Treatment Chemicals
315-478-2323 or 800-255-7589 Customer Service 844-204-9675
CHE-5040P Revision Date:July 17,2015
All Information.statements,dela,advice end/or remmmendallens,including,wahoul limkellon,those relating to storage.Ioadarglunloading,piping and transportation(collectively referred
to herein as Information')
are believed to b¢accurate end nk¢bl¢.Hos al.no representation or warenly,express or implied,is made as to its eompleleness,accuracy,fdness for a particular purpose or any other
matter.Including,vrkhoul
Gochtion,that the practice or application or any such lnfortnation 4lrea ofpa t1�rn c� erlAr wyp�ropdetion.Chemtradeboglaticslne. fumiof Its hadlfill'aea nacc rninod Cion
and e�are
not angogod In the business of providing technical,operational,anglneadngo t f la (or y u inlortnalbn provided Mraln has bean lumished ea an eccommodegonend wtthoul
charge.All information provided herein is Intended for use by pawns havi xpaden chemical Industry.Chemtrade shall not be responsible or liable for the use,application
or Implementation of the Infornabon provided herein,and all such information Is to be used at the risk,and In the sola judgment and discretion,of such persons,their employees,edviwm
and agents.
i
Liquid Ammonium Sulfate
( c Safety Data Sheet
6°`V II i 1-114,� according to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
•� Revision Date:05/01/15 Date of Issue:05/01/15 Version:1.0
1
ISECTI
1IDENTIFICATION
Product Identifier
Product Form:Mixture
Product Name:Liquid Ammonium Sulfate
Intended Use of the Product
Municipal and industrial water and wastewater treatment for disinfection as a source of ammonia in chloramination.Disinfection
byproduct control.
Name Address,and Telephone of the Responsible Party
Manufacturer
CHEMTRADE LOGISTICS INC.
155 Gordon Baker Road
Suite 300
Toronto,Ontario M2H 3N5
For SDS Info:(416)496-5856
www.chemtradelogistics.com
Emeraency Telephone Number
Emergency number ' . Canada:CANUTEC+1-613-996-6666/US:CHEMTREC+1-800-424-9300
Chemtrade Emergency Contact:(866)416-4404
For Chemical Emergency,Spill,Leak,Fire,Exposure,or Accident,call CHEMTREC—Day or Night
SECTIONHAZARDS IDENTIFICATION
Classification of the Substance or Mixture
Classification(GHS-US)
Aquatic Acute 2 H401
Label Elements
GHS-US Labeling
Signal Word(GHS-US) No labeling applicable
Hazard Statements(GHS-US) H401-Toxic to aquatic life
Precautionary Statements(GHS-US) P273-Avoid release to the environment
P501-Dispose of contents/container according to local,regional,territorial,provincial,
national,and international regulations.
Other Hazards
Other Hazards Not Contributing to the Classification: Exposure may aggravate those with pre-existing eye,skin,or respiratory
conditions.
Unknown Acute Toxicity(GHS-US) Not available
SECTION 3: COMPOSITIO N/I N FORMATION ON INGREDIENTS
Substances
Name Product identifier %(w/w) Classification(GHS-US)
Ammonium sulfate (CAS No)7783-20-2 38-40 Aquatic Acute 2,H401
Citric acid (CAS No)77-92-9 0.04 Comb.Dust
Eye Irrit.2A,H319
Full text of H-phrases:see section 16
iSECTIONAID MEASURES
Description of First Aid Measures
General:Never give anything by mouth to an unconscious person.If you feel unwell,seek medical advice(show the label if possible).
Inhalation:Remove to fresh air and keep at rest In a position comfortable for breathing.Obtain medical attention if breathing
difficulty persists.
Skin Contact:Rinse immediately with plenty of water.Obtain medical attention if irritation develops or persists.
Date of Issue:05/01/15 EN(English US) SDS#:CHE-50405 1/6
Exhibit "A"
r
I
Liquid Ammonium Sulfate
Safety Data Sheet
according to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Eye Contact: Rinse cautiously with water for at least 15 minutes.Remove contact lenses, if present and easy to do.Continue rinsing.
Obtain medical attention.
Ingestion:Do NOT induce vomiting.Rinse mouth.Immediately call a POISON CENTER or doctor/physician.
Most Important Symptoms and Effects Both Acute and Delayed
General:Not expected to present a significant hazard under anticipated conditions of normal use.
Inhalation:May cause respiratory irritation. Inhalation of decomposition products may cause pulmonary edema.Symptoms of
respiratory complications may occur several hours after.
Skin Contact:May cause skin irritation.
Eye Contact:May cause eye irritation.
Ingestion:Ingestion is likely to be harmful or have adverse effects.
Chronic Symptoms:None expected under normal conditions of use.
Indication of Any Immediate Medical Attention and Special Treatment Needed
If you feel unwell,seek medical advice(show the label where possible).
!SECTION
Extinguishing Media
Suitable Extinguishing Media:Use extinguishing media appropriate for surrounding fire.
Unsuitable Extinguishing Media:Do not use a heavy water stream.Use of heavy stream of water may spread fire.
Special Hazards Arising From the Substance or Mixture
Fire Hazard:Not flammable.
Explosion Hazard:Product is not explosive.
Reactivity:Hazardous reactions will not occur under normal conditions.
Advice for Firefighters
Precautionary Measures Fire:Exercise caution when fighting any chemical fire.
Firefighting Instructions:Use water spray or fog for cooling exposed containers.
Protection During Firefighting:Do not enter fire area without proper protective equipment,including respiratory protection.
Hazardous Combustion Products:Ammonia.
Reference to Other Sections
Refer to section 9 for flammability properties.
SECTION
Personal Precautions,Protective Equipment and Emergency Procedures
General Measures:Avoid all contact with skin,eyes,or clothing.Avoid breathing vapor,mist,or spray.
For Non-Emergency Personnel
Protective Equipment:Use appropriate personal protection equipment(PPE).
Emergency Procedures:Evacuate unnecessary personnel.
For Emergency Personnel
Protective Equipment:Equip cleanup crew with proper protection.
Emergency Procedures:Ventilate area.
Environmental Precautions
Prevent entry to sewers and public waters.Notify authorities if liquid enters sewers or public waters.
Methods and Material for Containment and Cleaning Up
For Containment:Contain any spills with dikes or absorbents to prevent migration and entry into sewers or streams.
Methods for Cleaning Up:Clear up spills immediately and dispose of waste safely.Spills should be contained with mechanical
barriers.Transfer spilled material to a suitable container for disposal.Contact competent authorities after a spill.
Reference to Other Sections
See Heading 8.Exposure controls and personal protection.Concerning disposal elimination after cleaning,see item 13.
ISECTI• AND STORAGE
Precautions for Safe Handling
Hygiene Measures:Handle in accordance with good industrial hygiene and safety procedures.Wash hands and other exposed areas
with mild soap and water before eating,drinking or smoking and when leaving work.
• /t 1/
Date of Issue:05/01/15 EN(JW^5F1KKY1t SDSti:CHE•5040S 2/6
Liquid Ammonium Sulfate
Safety Data Sheet
according to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures:Comply with applicable regulations.
Storage Conditions:Store in a dry,cool and well-ventilated place.Keep container closed when not in use.Keep/Store away from
direct sunlight,extremely high or low temperatures and incompatible materials.
Incompatible Materials:Strong acids.Strong bases.Strong oxidizers.Chlorates.Nitrates.Nitrites.
Specific End Use(s)
Municipal and industrial water and wastewater treatment for disinfection as a source of ammonia in chloramination.Disinfection
byproduct control.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Control Parameters
No Occupational Exposure Limits(OELs)have been established for this product or its chemical components.
Exposure Controls
Appropriate Engineering Controls:Ensure adequate ventilation,especially in confined areas. Emergency eye wash fountains and
safety showers should be available in the immediate vicinity of any potential exposure.Ensure all national/local regulations are
observed.
Personal Protective Equipment:Protective goggles.Gloves.Protective clothing.Insufficient ventilation:wear respiratory protection.
Materials for Protective Clothing:Chemically resistant materials and fabrics.
Hand Protection:Wear chemically resistant protective gloves.
Eye Protection:Chemical goggles or safety glasses.
Skin and Body Protection:Wear suitable protective clothing.
Respiratory Protection:If exposure limits are exceeded or irritation is experienced, NIOSH-approved respiratory protection should
be worn.
Environmental Exposure Controls:Do not allow the product to be released into the environment.
Consumer Exposure Controls:Do not eat,drink or smoke during use
SECTION . PROPERTIES
Information on Basic Physical and Chemical Properties
Physical State Liquid
Appearance Clear,faint yellow to amber colored
Odor Odorless
Odor Threshold Not available
pH 3-5
Relative Evaporation Rate(butylacetate=l) Not available
Melting Point Not applicable
Freezing Point -12°C(10.4°F)
Boiling Point Not available
Flash Point Not applicable
Auto-ignition Temperature Not applicable
Decomposition Temperature Ammonium sulfate:235°C(455°F)
Flammability(solid,gas) Not applicable
Lower Flammable Limit Not applicable
Upper Flammable Limit Not applicable
Vapor Pressure Not available
Relative Vapor Density at 20°C Not available
Specific Gravity 1.216-1.228
Solubility Not available
Partition coefficient:n-octanol/water Not available
Viscosity Not available
Explosion Data—Sensitivity to Mechanical Impact Not expected to present an explosion hazard due to mechanical impact.
Explosion Data—Sensitivity to Static Discharge Not expected to present an explosion hazard due to static discharge.
Date of Issue:05/01/15 m( 3 • • SDSN:CHE-50405 3/6
Liquid Ammonium Sulfate
Safety Data Sheet
according to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
SECTION1 a ; 1 • i
Reactivity: Hazardous reactions will not occur under normal conditions.
Chemical Stability: Stable under recommended handling and storage conditions(see section 7).
Possibility of Hazardous Reactions: Hazardous polymerization will not occur.
Conditions to Avoid: Direct sunlight. Extremely high or low temperatures.Ignition sources.Incompatible materials.
Incompatible Materials: Strong acids,strong bases,strong oxidizers.Chlorates.Nitrates.Nitrites.
Hazardous Decomposition Products: Ammonia.Sulfur oxides.
SECTION • • • • • •
Information on Toxicological Effects-Product
Acute Toxicity:Not classified
LD50 and LC50 Data:Not available
Skin Corrosion/Irritation:Not classified(pH:3-5)
Serious Eye Damage/Irritation:Not classified(pH:3-5)
Respiratory or Skin Sensitization:Not classified
Germ Cell Mutagenicity: Not classified
Teratogenicity: Not available
Carcinogenicity:Not classified
Specific Target Organ Toxicity(Repeated Exposure):Not classified
Reproductive Toxicity:Not classified
Specific Target Organ Toxicity(Single Exposure):Not classified
Aspiration Hazard:Not classified
Symptoms/Injuries After Inhalation:May cause respiratory irritation.Inhalation of decomposition products may cause pulmonary
edema.Symptoms of respiratory complications may occur several hours after.
Symptoms/Injuries After Skin Contact:May cause skin irritation.
Symptoms/injuries After Eye Contact:May cause eye irritation.
Symptoms/Injuries After Ingestion:Ingestion is likely to be harmful or have adverse effects.
Chronic Symptoms:None expected under normal conditions of use.
Information on Toxicological Effects-Ingredient(s)
LD50 and LC50 Data:
Ammonium sulfate(7783-20-2)
LD50 Oral Rat >2000 mg/kg
Citric acid(77-92-9)
LD50 Oral Rat 5400 mg/kg
LD50 Dermal Rat >2000 mg/kg
ISECTI•N 12: ECOLOGICAL INFORMATION—.
Toxicity
Ecology-General:This material is hazardous to the aquatic environment.Keep out of sewers and waterways.
Ecology-Water:Toxic to aquatic life.
Ammonium sulfate(7783-20-2)
LC50 Fish 1 5.2(5'2-8.2)mg/1(Exposure time:96 h-Species:Oncorhynchus mykiss[static])
EC50 Daphnia 1 14 mg/I(Exposure time:48 h-Species:Daphnia magna)
LC 50 Fish 2 32.2(32.2-41.9)mg/I(Exposure time:96 h-Species:Oncorhynchus mykiss[flow-
through])
Citric acid(77-92-9)
LC50 Fish 1 1516 mg/l(Exposure time:96 h-Species:Lepomis macrochirus[static])
Persistence and Degradability
Citric acid(77-92-9)
Persistence and Degradability Readily biodegradable in water.
Date of issue:05/01/15 EN( • • SDSH:CHE-50405 4/6
i
Liquid Ammonium Sulfate
Safety Data Sheet
according to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Bioaccumulative Potential
Ammonium sulfate(7783-20-2)
Log Pow -5.1(at 25°C)
Citric acid(77-92-9)
Log Pow -1.72(at 20°C)
Mobility in Soil Not available
Other Adverse Effects
Other Information:Avoid release to the environment.
•N 13: DISPOSAL CONSIDERATIONS
Waste Disposal Recommendations:Dispose of waste material in accordance with all local,regional,national,and international
regulations.
Ecology—Waste Materials:Avoid release to the environment.
iSECTI•N 14:TRANSPORT INFORMATION
14.1 In Accordance with DOT Not regulated for transport
14.2 In Accordance with IMDG Not regulated for transport
14.3 In Accordance with IATA Not regulated for transport
14.4 In Accordance with TDG Not regulated for transport
SECTIONREGULATORY • •
US Federal Regulations
Ammonium sulfate(7783-20-2)
Listed on the United States TSCA(Toxic Substances Control Act)inventory
Citric acid(77-92-9)
Listed on the United States TSCA(Toxic Substances Control Act)inventory
US State Regulations
Ammonium sulfate(7783-20-2)
U.S.-Massachusetts-Right To Know List
U.S.-Pennsylvania-RTK(Right to Know)-Environmental Hazard List
U.S.-Pennsylvania-RTK(Right to Know)List
Canadian Regulations
Liquid Ammonium Sulfate
WHMIS Classification Uncontrolled product according to WHMIS classification criteria
Ammonium sulfate(7783-20-2)
Listed on the Canadian DSL(Domestic Sustances List)
Listed on the Canadian IDL(Ingredient Disclosure List)
WHMIS Classification Uncontrolled product according to WHMIS classification criteria
Citric acid(77-92-9)
Listed on the Canadian DSL(Domestic Sustances List)
Listed on the Canadian IDL(Ingredient Disclosure List)
WHMIS Classification I Class D Division 2 Subdivision B-Toxic material causing other toxic effects
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations(CPR)and the SDS
contains all of the information required by CPR.
SECTION.16: OTHER INFORMATION, DATE OF PREPARATION OR LAST REVISION
Revision date 05/01/15
Other Information This document has been prepared in accordance with the SDS requirements of the OSHA
Hazard Communication Standard 29 CFR 1910.1200.
GHS Full Text Phrases:
Aquatic Acute 2 Hazardous to the aquatic environment-Acute Hazard Category 2
I1 It
Date of Issue:05/01/15 EN(ExhibitSDStt:CHE•5040S 5/6
i
Liquid Ammonium Sulfate
Safety Data Sheet
according to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Comb.Dust Combustible Dust
Eye Irrit.2A Serious eye damage/eye irritation Category 2A
H232 May form combustible dust concentrations in air
H319 Causes serious eye irritation
H401 Toxic to aquatic life
Party Responsible for the Preparation of This Document
CHEMTRADE LOGISTICS,INC.
For SDS Info:(416)496-5856
Handle product with due care and avoid unnecessary contact.This information is supplied under U.S.OSHA'S"Right to Know"(29 CFR
1910.1200)and Canada's WHMIS regulations.Although certain hazards are described herein,we cannot guarantee these are the only
hazards that exist. The information contained herein is based on data available to us and is believed to be true and accurate but it is
not offered as a product specification.No warranty,expressed or implied,regarding the accuracy of this data,the hazards connected
with the use of the product,or the results to be obtained from the use thereof,is made and Chemtrade and its affiliates assume no
responsibility. Chemtrade is a member of the CIAC(Chemistry Industry Association of Canada)and adheres to the codes and principles
of Responsible Care''
ri
If 4�
Responsible Carol' Gestlon resln'onsable"
Wrtamtaandlr�tiitr?+aS�' 6=: �� NrwinPteeracnnMlrntusmrWMa1M.
Chemtrade North Ameria SDSTemplate
Date of Issue:05/01/15 EN(E • • SDS#:CHE-50405 6/6
i
CHEM TRADE
Water Chemicals Group 90 East Halsey Road
Parsippany,NJ 07054
Tel:973-515-0900
Fax;973-5154461
PRODUCTS CERTIFICATION
This is to certify that the all grades of Clar+Ion as produced by Chemtrade
Chemicals US LLC's meet NSF/ANSI 60 and AWWA Standard B-403-09 in every
respect. Product bid will also meet or exceed the speicifcations as set forth by the
City of Round Rock chemical bid opening September 8, 2016.
Please find attached related MSDS and NSF Certification.
Elizab th Ryno
Marketing Specialist
CHEMTRADE CHEMICALS EX111DIt
1
i
CR HA Y11 A& For Product Information:
http://www.generaIchemical,com/products/
i http://www.chemtradelogistics.com
Clar+Ion® CS8
PRODUCT EIA-Thz S-KEE-T
Clar+Ion®CS8 is a clear, blue-green colored liquid. It is an advanced cationic coagulant and flocculant
suitable for industrial and municipal water and wastewater treatment applications.
NSF/ANSI Standard 60: Drinking Water Chemicals- Health Effects; Certified
Formula: Aluminum sulfate mixture
C.A.S. 10043-01-3/7758-98-7(Aluminum sulfate/Cupric sulfate)
pH(neat) 2.4-2.7
Specific Gravity @ 70°F(21°C) 1.29- 1.32
Freezing Point(approx.) 3eF(-16°C)
Density,lbs/gal., U.S. 10.7-11.0
Aluminum as Air % 3.9-4.1
Aluminum as A1203,% 7.3-7.7
Copper(II)Sulfate Pentahydrate,% 1.9-2.1
Soluble Cupric Iron(Cu+2),% 0.48-0.53
E'CtC2:C Cr0'� E�r.
Municipal and industrial water and wastewater treatment for the removal of turbidity, color,suspended
solids and phosphorus. Sludge compaction and volume reduction. Lagoon treatment.Oily wastewater
clarification and dissolved air flotation. Emulsion breaking. Algaecide.
Bulk transport Bulk car
275 gal.one way container 55 gal. plastic drum
S-CIVI-P[Eic Rr2.ee U_TiCO°R9
DOT Classification:
Corrosive Liquid,Acidic, Inorganic,N.O.S. (Contains Aluminum Sulfate and Cupric Sulfate)
Hazard Class:8 DOT ID Number:UN 3264 Packing Group: III
Copper Sulfate: RQ= 10 Lbs.(CASRN formula basis)
PIR.ODUCT S&FETY �f�Ft f E4)ty
Clan+Ion®CS8 can irritate the skin and eyes. May be harmful if swallowed. Avoid contact with skin,eyes
and clothing. Anyone procuring, using or disposing of these products or their containers must be familiar
with the appropriate safety and handling precautions. Such information may be found in the Material
Safety Data Sheets(MSDS)for these products or you may contact Chemtrade Technical Service. In the
event of an emergency with these products,call the 24 hour Emergency Number: USA(CHEMTREC)
800-424-9300 or Canada(CANUTEC)613-996-6666. For additional information contact:
Syracuse Technical Center Water Treatment Chemicals
(315)478-2323 (973)515-0900
(800)255-7589 Outside NY (800)631-8050 Customer Service
Revision Date:April 16,2014
All Information,statements,date,Woe andlor rammmendellons.Including,whhoul KetRation.,lose relagng to storage,loe6ngfunloedmg,piping and burspoAatlon(collecfvely rafaned to herein
as tnfon urt(on)
are believed to be accurate and reliable.Hoxaver,no representation or wa expr arl� d,i mode 3): mpl)ll es,accuracy,fMmss for a padk,ler purpose or any other matter,Indudirg,without
IimAagon,Ihel the Hectics ore salon of en each lnfomisson Vfree of t yr_au�doi,cy�p m_l�j ro gon.Chemtrede logistic lnc.and Its eg9lebes collectivdy,'Chamboda ane
P PWI ng Y pe ng I � FPS x"'!c• Y P ( 7
Hol engaged In the business of providing laWfcel,operational,a Ineari r t end,t en Hush Information rovlded heroin has been furnished as an aaommodetkn end
w#Ioub change.All Information provided herein Is Intended for use by persons having requisite knovdedge,skill and experience In the chemical Industry.Chemtrede nhall not be responsible
or liable forthe use,
eppllcetionar Implemenlatlon of tits Informelkn provided herein,and all such Idormatlon Is to be used at"risk and In Um sole Judgment and discretion,of such persons,their employees,advlsore
and agents.
-- .,..... T'_,--.�..
i
_ Clar+Ion® CS8
Cr• -= fr Fr SafetyData Sheet
i 1 I�t `tf A D E Acord'ng to Federal Register/Vol.77,No.Sg/Monday,March 26,2012/Rules and Regulations
Revision Date:05/01/15 Date of Issue:05/01/15 Version:1.0
SECTIONIDENTIFICATION
Product Identifier
Product Form:Mixture
Product Name:Clar+Ion®CS8
Intended Use of the Product
Use of the Substance/Mixture:Municipal and industrial water and wastewater treatment for the removal of turbidity,color,
suspended solids and phosphorus,Sludge compaction and volume reduction.Lagoon treatment.Oily wastewater clarification and
dissolved air flotation.Emulsion breaking.For professional use only.
Name,Address.and Telephone of the Responsible Party
Manufacturer
CHEMTRADE LOGISTICS INC.
155 Gordon Baker Road
Suite 300
Toronto,Ontario M21-1 3N5
For SDS Info: (416)496-5856
www.chemtradelogistics.com
Emergency Telephone Number
Emergency Number Canada:CANUTEC+1-613-996-6666/US:CHEMTREC+1-800-424-9300
Chemtrade Emergency Contact:(866)416-4404
For Chemical Emergency,Spill,Leak,Fire,Exposure,or Accident,call CHEMTREC—Day or Night
ISECTI• HAZARDS IDENTIFICATION
Classification of the Substance or Mixture
Classification(GHS-US)
Met.Corr.1 H290
Eye Dam.1 H318
Aquatic Acute 3 H402
Aquatic Chronic 3 H412
Full text of H-phrases:see section 16
Label Elements
GHS-US Labeling
Hazard Pictograms(GHS-US)
r
x7505
Signal Word(GHS-US) : Danger
Hazard Statements(GHS-US) H290-May be corrosive to metals
H318-Causes serious eye damage
H402-Harmful to aquatic life
H412-Harmful to aquatic life with long lasting effects
Precautionary Statements(GHS-US) P234-Keep only in original container.
P273-Avoid release to the environment.
P280-Wear protective gloves,protective clothing,face protection,eye protection.
P305+P351+P338-IF IN EYES:Rinse cautiously with water for several minutes.Remove
contact lenses,if present and easy to do.Continue rinsing.
P310-Immediately call a poison center or doctor.
P390-Absorb spillage to prevent material damage.
P406-Store in corrosive resistant container with a resistant inner liner.
P501-Dispose of contents/container in accordance with local,regional,national,
territorial,provincial,and international regulations.
Date of Issue:05/01/15 EN(English US) SDS#:CHE-50575 1/8
Exhibit "A"
i
Clar+lore° CS8
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Other Hazards
Other Hazards Not Contributing to the Classification: Exposure may aggravate those with pre-existing eye,skin,or respiratory
conditions.
Unknown Acute Toxicity IGH§-USI Not available
!SECTION 3: COMPOS ITION/I N FORMATION ON INGREDIENTS
Name Product identifier %(w/w) Classification(GHS-US)
Water (CAS No)7732-18-5 40-70 Not classified
Aluminum Sulfate* (CAS No)10043-01-3 30-60 Met.Corr.1,H290
Eye Dam.1,H318
Aquatic Acute 3,H402
Sulfuric acid,copper(2+)salt(1:1), (CAS No)7758-99-8 2 Acute Tox.4(Oral),H302
pentahydrate** Skin Irrit.2,H315
Eye Irrit.2A,H319
Aquatic Acute 1,H400
Aquatic Chronic 1,H410
*As AI2(SO4)3.14H2O(Dry Aluminum Sulfate)
**Strong inorganic acid aerosols/mists containing this substance are carcinogenic to humans. However,under conditions of normal
use this is not a potential route of exposure,and does not warrant a carcinogenicity classification for the mixture.
***The specific chemical identity and/or exact percentage of composition have been withheld as a trade secret within the meaning of
the OSHA Hazard Communication Standard[29 CFR 1910.1200].
Full text of H-phrases:see section 16
SECTIONAID MEASURES
I
Description of First Aid Measures
General:Never give anything by mouth to an unconscious person.If you feel unwell,seek medical advice(show the label if possible).
Inhalation:Remove to fresh air and keep at rest in a position comfortable for breathing.Obtain medical attention if breathing
difficulty persists.
Skin Contact:Remove contaminated clothing.Gently wash with plenty of soap and water followed by rinsing with water for at least
15 minutes.Call a POISON CENTER or doctor/physician if you feel unwell.Wash contaminated clothing before reuse.
Eye Contact:Rinse cautiously with water for several minutes.Remove contact lenses,if present and easy to do.Continue rinsing for
at least 60 minutes.Immediately call a POISON CENTER or doctor/physician.
Ingestion:Do NOT induce vomiting.Rinse mouth.Immediately call a POISON CENTER or doctor/physician.
Most Important Symptoms and Effects Both Acute and Delayed
General:Causes serious eye damage.
Inhalation:May cause respiratory irritation.
Skin Contact:May cause skin irritation.
Eye Contact:Causes serious eye damage.
Ingestion:Ingestion is likely to be harmful or have adverse effects.
Chronic Symptoms: None expected under normal conditions of use.
Indication of Any Immediate Medical Attention and Special Treatment Needed
If you feel unwell,seek medical advice(show the label where possible).
ISECTI• MEASURES
Extinguishing Media
i
Suitable Extinguishing Media:Use extinguishing media appropriate for surrounding fire.
Unsuitable Extinguishing Media:Do not use a heavy water stream.Use of heavy stream of water may spread fire.
Special Hazards Arising From the Substance or Mixture
Fire Hazard:Not flammable.
Explosion Hazard:Product is not explosive.
Reactivity:Corrosive to metals.
Advice for Firefighters
Precautionary Measures Fire:Exercise caution when fighting any chemical fire.
Date of Issue:05/01/15 EN(Exhibit SDS#:CHE-50575 2/8
i
i
Clar+Ion° CSS
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Firefighting Instructions:Use water spray or fog for cooling exposed containers.
Protection During Firefighting:Do not enter fire area without proper protective equipment,including respiratory protection.
Hazardous Combustion Products:Sulfur oxides.
Other Information:Refer to Section 9 for flammability properties.
Reference to Other Sections
Refer to section 9 for flammability properties.
SECTION
Personal Precautions,Protective Equipment and Emergency Procedures
General Measures:Handle in accordance with good industrial hygiene and safety practice.
For Non-Emergency Personnel
Protective Equipment:Use appropriate personal protection equipment(PPE).
Emergency Procedures:Evacuate unnecessary personnel.
For Emergency Personnel
Protective Equipment:Equip cleanup crew with proper protection.
Emergency Procedures:Stop leak if safe to do so.Ventilate area.
Environmental Precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
Methods and Material for Containment and Cleaning Up
For Containment:Contain any spills with dikes or absorbents to prevent migration and entry into sewers or streams.
Methods for Cleaning Up:Clean up spills immediately and dispose of waste safely.Spills should be contained with mechanical
barriers.Transfer spilled material to a suitable container for disposal.Contact competent authorities after a spill.
Reference to Other Sections
See Heading 8.Exposure controls and personal protection.For further information refer to section 13.
SECTION • STORAGE
Precautions for Safe Handling
Additional Hazards When Processed:Corrosive to metals upon prolonged contact.
Hygiene Measures:Handle in accordance with good industrial hygiene and safety procedures.Wash hands and other exposed areas
with mild soap and water before eating,drinking or smoking and when leaving work.
Conditions for Safe Storage,Including Any Incompatibilities
Technical Measures:Comply with applicable regulations.
Storage Conditions:Store in a dry,cool and well-ventilated place.Keep container closed when not in use.Keep/Store away from
direct sunlight,extremely high or low temperatures and incompatible materials.Store in original container or corrosive resistant
and/or lined container.
Incompatible Materials:Strong acids.Strong bases.Strong oxidizers.
Specific End Use(s)
For professional use only.Municipal and industrial water and wastewater treatment for the removal of turbidity,color,suspended
solids and phosphorus.Sludge compaction and volume reduction.Lagoon treatment.Oily wastewater clarification and dissolved air
flotation.Emulsion breaking.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION'
Control Parameters
For substances listed in section 3 that are not listed here, there are no established Exposure limits from the manufacturer,supplier,
importer,or the appropriate advisory agency including:ACGIH(TLV),NIOSH(REL),OSHA(PEL),Canadian provincial governments,or
the Mexican government.
Copper compounds(RR-00595-8)
USA ACGIH ACGIH TWA(mg/m3) 1 mg/m3(dust and mist)
USA NIOSH NIOSH REL(TWA)(mg/m3) 1 mg/m3(dust and mist)
USA IDLH US IDLH(mg/m3) 100 mg/m3(dust and mist)
Manitoba OEL TWA(mg/m3) 1 mg/m3(dust and mist)
Newfoundland&Labrador 0ELTWA(mg/m3) 1 mg/m3(dust and mist)
Nova Scotia OEL TWA(mg/m3) 1 mg/m3(dust and mist)
Prince Edward Island OEL TWA(mg/m3) 1 mg/m3(dust and mist)
Date of Issue:05/01/15 EN(E isW 7 7
TTATT
SDSH:CHE-5057S 3/8
i
Clar+Ion° CS8
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Exposure Controls
Appropriate Engineering Controls:Ensure adequate ventilation,especially in confined areas. Emergency eye wash fountains and
safety showers should be available in the immediate vicinity of any potential exposure.Ensure all national/local regulations are
observed.
Personal Protective Equipment:Protective goggles.Gloves.Protective clothing.Insufficient ventilation:wear respiratory protection.
Materials for Protective Clothing:Chemically resistant materials and fabrics.
Hand Protection:Wear chemically resistant protective gloves.
Eye Protection:Chemical safety goggles.
Skin and Body Protection:Wear suitable protective clothing.
Respiratory Protection:In case of insufficient ventilation,wear suitable respiratory equipment.
Environmental Exposure Controls:Do not allow the product to be released into the environment.
Consumer Exposure Controls:Do not eat,drink or smoke during use
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Information on Basic Physical and Chemical Properties
Physical State Liquid
Appearance Clear,blue
Odor Not available
Odor Threshold Not available
pH 2.4-2.7
Melting Point Not available
Freezing Point -16°C(3.2°F)
Boiling Point Not available
Flash Point Not flammable
Auto-ignition Temperature Not applicable
Decomposition Temperature Not available
Flammability(solid,gas) Not applicable
Lower Flammable Limit Not applicable
Upper Flammable Limit Not applicable
Vapor Pressure Not available
Relative Vapor Density at 20°C Not available
Relative Density Not available
Specific Gravity 1.29-1.32
Solubility 100%in water
Partition Coefficient:N-Octanol/Water Not available
Viscosity Not available
Explosion Data—Sensitivity to Mechanical Impact Not expected to present an explosion hazard due to mechanical impact.
Explosion Data—Sensitivity to Static Discharge Not expected to present an explosion hazard due to static discharge.
SECTION + • REACTIViTY
Reactivity: Corrosive to metals.
Chemical Stability: Stable under recommended handling and storage conditions(see section 7).
Possibility of Hazardous Reactions: Hazardous polymerization will not occur.
Conditions to Avoid: Direct sunlight. Extremely high or low temperatures.Incompatible materials.
Incompatible Materials: Strong acids.Strong bases.Strong oxidizers.Metals.
Hazardous Decomposition Products: Oxides of aluminum.Oxides of copper.Sulphur oxides.Hydrochloric acid fumes may be
generated.
•N 11:TOXICOLOGICAL INF• • •
Information on Toxicological Effects-Product
Acute Toxicity:Not classified
LD50 and LC50 Data:Not available
Date of Issue:05/01/15 EN(EIII&QW1 MUIRSDSH:CHE-50575 4/8
i
Clar+Ion° CS8
Safety Data Sheet
j According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Skin Corrosion/Irritation:Not classified
pH:2.4-2.7
Serious Eye Damage/Irritation:Causes serious eye damage.
pH:2.4-2.7
Respiratory or Skin Sensitization:Not classified
Germ Cell Mutagenicity:Not classified
Teratogenicity: Not classified
Carcinogenicity:Not classified
Specific Target Organ Toxicity(Repeated Exposure):Not classified
Reproductive Toxicity:Not classified
Specific Target Organ Toxicity(Single Exposure):Not classified
Aspiration Hazard:Not classified
Symptoms/Injuries After Inhalation:May cause respiratory irritation.
Symptoms/Injuries After Skin Contact:May cause skin irritation.
Symptoms/Injuries After Eye Contact:Causes serious eye damage.
Symptoms/Injuries After Ingestion:Ingestion is likely to be harmful or have adverse effects.
Chronic Symptoms:None expected under normal conditions of use.
Information on Toxicological Effects-Ingredient(s)
LD50 and LC50 Data:
Sulfuric acid,copper(2+)salt(1:1),pentahydrate(7758-99-8)
LD50 Dermal Rat >2 g/kg
SECTION • • • ' •
Toxicity
Ecology-General:Harmful to aquatic life.Harmful to aquatic life with long lasting effects.
Sulfuric acid,copper(2+)salt(1:1),pentahydrate(7758-99-8)
LC50 Fish 1 0.66-1.15 mg/I(Exposure time:96 h-Species:Lepomis macrochirus[semi-static])
EC50 Daphnia 1 0.147-0.227 mg/I(Exposure time:48 h-Species:Daphnia magna[Static])
LC 50 Fish 2 0.96-1.8 mg/I(Exposure time:96 h-Species: Lepomis macrochirus[static])
Persistence and Degradability Not available
Bioaccumulative Potential Not available
Mobility in Soil Not available
Other Adverse Effects
Other Information:Avoid release to the environment.
'SECTION ' • CONSIDERATIONS
Waste Disposal Recommendations:Dispose of waste material in accordance with all local,regional,national,provincial,territorial
and international regulations.
Ecology—Waste Materials:Avoid release to the environment.
'SECTION ' • ' • ' i •
14.1 In Accordance with DOT
Proper Shipping Name CORROSIVE LIQUID,ACIDIC,INORGANIC,N.O.S.(CONTAINS ALUMINUM SULFATE)
Hazard Class 8
Identification Number UN3264
Label Codes 8
Packing Group III
ERG Number 154
14.2 In Accordance with IMDG
Proper Shipping Name CORROSIVE LIQUID,ACIDIC,INORGANIC,N.O.S.(CONTAINS ALUMINUM SULFATE)
Hazard Class : 8
Identification Number UN3264
Date of Issue:05/01/15 EN( SDS#:CHE-50575 5/8
i
Clar+Ion° CS8
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Packing Group : III
label Codes 8
EmS-No.(Fire) F-A
EmS-No.(Spillage) S-B
14.3 In Accordance with IATA
Proper Shipping Name CORROSIVE LIQUID,ACIDIC,INORGANIC,N.O.S.(CONTAINS ALUMINUM SULFATE)
Packing Group III
Identification Number UN3264
Hazard Class 8 t"
label Codes 8
ERG Code(IATA) 8L
14.4 In Accordance with TDG
Proper Shipping Name CORROSIVE LIQUID,ACIDIC,INORGANIC,N.O.S.(CONTAINS ALUMINUM SULFATE)
Packing Group III
Hazard Class 8
Identification Number UN3264
Label Codes 8
•N IS: REGULATORY INFORMATION
US Federal Reeulations
CIar+Ion®CSS
SARA Section 311/312 Hazard Classes Timmediate(acute)health hazard
Water(7732-18-5)
Listed on the United States TSCA(Toxic Substances Control Act)inventory
Copper compounds(RR-00595-8)
Listed on United States SARA Section 313
SARA Section 313-Emission Reporting 1.0%(This category does not include CAS numbers 147-14-8,1328-
53-6,or 14302-13-7,or copper phthalocyanine compounds that are
substituted with only hydrogen and/or chlorine and/or bromine.)
Aluminum Sulfate(10043-01-3)
Listed on the United States TSCA(Toxic Substances Control Act)inventory
US State Regulations
CIar+Ion®CS8()
Not listed on US State Regulatory Lists
Copper compounds(RR-00595-8)
U.S.-New Jersey-Right to Know Hazardous Substance List
U.S.-Pennsylvania-RTK(Right to Know)-Environmental Hazard List
U.S.-Pennsylvania-RTK(Right to Know) List
Aluminum Sulfate(10043-01-3)
U.S.-Massachusetts-Right To Know List
U.S.-New Jersey-Right to Know Hazardous Substance List
U.S.-Pennsylvania-RTK(Right to Know)-Environmental Hazard List
U.S.-Pennsylvania-RTK(Right to Know)List
Fxh;hit A
Date of Issue:05/01/15 EN i ng is SDSN:CHE-50575 6/8
i
I
Clar+Ion° CS8
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Federal Insecticide,Fungicide and Rodenticide Act
EPA Registration Number: 83918-5
This product is a pesticide product registered by the Environmental Protection Agency and is subject to certain labeling
requirements under federal pesticide law. These requirements differ from the classification criteria an dhazard informaton required
for safety data sheets,and for workplace labels of non-pesticide chemicals. Following is the hazard informatno as required on the
pesticide label:
CAUTION
CORROSIVE
Causes irreversible eye damage and skin burns.
Harmful if swallowed or absorbed through skin or inhaled.
Do not get in eyes,on skin or on clothing.
Avoid breathing vapour or spray mist.
Prolonged or frequently repeated skin contact may cause allergic reaction in some individuals.
Remove contaminated clothing and wash clothing before reuse.
Wash thoroughly with soap and water after handling.
Pesticide is toxic to fish and aquatic invertebrates and may contaminate water through runoff.
Do not contaminate water when disposing of equipment wash waters or rinsate.
Canadian Regulations
Clar+lon®CSS
WHMIS Cllaassification Class E-Corrosive Material
li( h
Sulfuric acid,copper(2+)salt(1:1),pentahydrate(7758-99-8)
WHMIS Classification Class D Division 2 Subdivision B-Toxic material causing other toxic effects
Water(7732-18-5)
Listed on the Canadian DSL(Domestic Substances List)
WHMIS Classification I Uncontrolled product according to WHMIS classification criteria
Copper compounds(RR-00595-8)
Listed on the Canadian IDL(Ingredient Disclosure List)
IDL Concentration 1
Aluminum Sulfate(10043-01-3)
Listed on the Canadian DSL(Domestic Substances List)
WHMIS Classification I Class E-Corrosive Material
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations(CPR)and the SDS
contains all of the information required by CPR.
SECTION 16:_OTHER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION
Revision date 05/01/15
Other Information This document has been prepared in accordance with the SDS requirements of the OSHA
Hazard Communication Standard 29 CFR 1910.1200.
GHS Full Text Phrases:
Acute Tox.4(Oral) Acute toxicity(oral)Category 4
Aquatic Acute 1 Hazardous to the aquatic environment-Acute Hazard Category 1
Aquatic Acute 3 Hazardous to the aquatic environment-Acute Hazard Category 3
Aquatic Chronic 1 Hazardous to the aquatic environment-Chronic Hazard Category 1
Aquatic Chronic 3 Hazardous to the aquatic environment-Chronic Hazard Category 3
Eye Dam.1 Serious eye damage/eye irritation Category 1
Eye Irrit.2A Serious eye damage/eye irritation Category 2A
Date of issue:os/ows EN( • • SDS#:CHE-5057S 7/8
i
Clar+Ion® CS8
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Met.Corr.1 Corrosive to metals Category 1
Skin Irrit.2 Skin corrosion/irritation Category 2
H290 May be corrosive to metals
H302 Harmful if swallowed
H315 Causes skin irritation
H318 Causes serious eye damage
H319 Causes serious eye irritation
H400 Very toxic to aquatic life
H402 Harmful to aquatic life
H410 Very toxic to aquatic life with long lasting effects
H412 Harmful to aquatic life with long lasting effects
Party Responsible for the Preparation of This Document
CHEMTRADE LOGISTICS,INC.
For SDS Info: (416)496-5856
Handle product with due care and avoid unnecessary contact.This information is supplied under U.S.OSHA'S"Right to Know"(29 CFR
1910.1200)and Canada's WHM1S regulations.Although certain hazards are described herein,we cannot guarantee these are the only
hazards that exist. The information contained herein is based on data available to us and is believed to be true and accurate but it is
not offered as a product specification.No warranty,expressed or implied,regarding the accuracy of this data,the hazards connected
with the use of the product,or the results to be obtained from the use thereof,is made and Chemtrade and its affiliates assume no
responsibility.Chemtrade is a member of the CIAC(Chemistry Industry Association of Canada)and adheres to the codes and principles
of Responsible Care"".
y..E
Responsible Carel r Gestion responsable"
O�,rren�n+tbtxi�rttli-i �' IptrrrnPlrs++l rne!rklhdNDrmp�vellr.
Chemtrade North America 5D5 Template
Date of Issue:05/01/15 EN( • • SDSN:CHE-50575 8/8
i
Water Chemicals Group 90 East Halsey Road
Parsippany,NJ 07054
Tel:973-515-0900
Fax:973-5154461
PRODUCTS CERTIFICATION
This is to certify that the all grades of Hyper+Ion as produced by Chemtrade
Chemicals meet NSF/ANSI 60 and AWWA Standard B-408-10 in every respect.
Product bid will also meet or exceed the specifications as set forth by the City of
Round Rock bid opening September 8, 2016.
Please find attached related MSDS and NSF Certification.
Elizab th Ryno
Marketing Specialist
Exhibit "A"
—
x �o.ni
�����U��� �M��
. .� �~. .�.' '---
���bO�� �����
, caa��cx,� ^c,��c~ ,��^=^="
0.i{&P'&C-l'iHMii�1-[Q�'Sv
Hyper4lonO1O0O is colorless liquid. It is an advanced cationic coagulant and flocculant suitable for
industrial and municipal water and wastewater treatment applications.
NSF/ANSU Standard 60: Drinking Water Chemicals -Health Effects; Certified
Formula: Polyaluminum hydroxychloride solution
C.A.G. 1327-41~9(Po|yo|uminumhydnoxyuh|ohda)
pH(neat) 2.5'4.0
Specific Gravity @21^C(70"F) 1.30-1.36
Freezing Point(appnoxj -4-C(25-F)
Density, lbs./gal.,UG 10.8'11.3
Aluminum aoAir Y4 11.9-12.7
Aluminum anA|zOo.% 22.5'24.0
Booicity, Y6 80(min.)
PIZODUGY IJE�'rla
Municipal and industrial water and wastewater treatment for the removal of turbidity,color,suspended
solids and phosphorus. Sludge compaction and volume reduction. Lagoon treatment.Oily wastewater
clarification and dissolved air flotation. Emulsion breaking. Paper machine pitch control.
Bulk transport Bulk car 275USgal. one way container 55UGgal. plastic drum
@;ktUV2 12 Ei10 [1|i�GoWTLI [o L"k& (w� L)'C!l/�E)ei\
Classification: Not regulated for transport
RQ: Not applicable
VMDUCT ��&VUQTY' R11:r-QL-'Lk8&—ViQ11j1
Causes serious eye irritation. Wash hands,forearms, and face thoroughly after handling. VVeoroyn
protection,face protection, protective c|othing. ondprobenUveg|ovoo. Anyone procuring, using or
disposingof these d their ti must be familiar with the date safetyand handling
precautions. Such information may be found in the Safety Data Sheets(SDS)for these products or you
may contact Chemtrade at 416-496-5856. In the event of an emergency with these products,call the 24
hour Emergency Number:USA(CHEMTREC)800-424-9300 or Canada(CANUTEC)613-996-6666.
For additional information contact:
Syracuse Technical Center Water Treatment Chemicals
315'478-2323or800'256-7588 Customer Service 844-2U4'0875
c*s6014p Revision Date:July 1r.uo1u
All information.stalements.data.advice andlor recommendations.Including.%ilhout limitation,those relatIN to storage,loadinglunloading,piping writransportation(collectivelyreferred
to herein as Information)
i
1
Hyper+Ion° 1090
t
C
r , yy [ (( Safety Data Sheet
h [�;�LI I' ll l//4 E�' ; According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Revision Date:05/03/15 Date of Issue:05/03/15 Version:1.0
SECTION ' •
Product Identifier
Product Form:Mixture
Product Name:Hyper+Ion®1090
Other Generic Name:Aluminum Chlorohydrate
Intended Use of the Product
Use of the Substance/Mixture:Municipal and industrial water and wastewater treatment for the removal of turbidity,color,
suspended solids and phosphorus.Sludge compaction and volume reduction.Lagoon treatment.Oily wastewater clarification and
dissolved air flotation.Emulsion breaking.Paper machine pitch control.Retention and drainage aid,pitch control,and neutral size
bonding agent for paper machines operating in the pH range of 6.0 to 7.8.Point of application to the paper machine is critical in
obtaining maximum benefit.This product may be used on fourdrinier and cylinder machines,as well as twin wire formers.It is
effective for a variety of paper and board grades.
Name Address,and Telephone of the Responsible Party
Manufacturer
CHEMTRADE LOGISTICS INC.
155 Gordon Baker Road
Suite 300
Toronto,Ontario M2H 3N5
For SDS Info:(416)496-5856
www.chemtradelogistics.com
Emergency Telephone Number
Emergency Number Canada:CANUTEC+1-613-996-6666/US:CHEMTREC+1-800-424-9300
Chemtrade Emergency Contact:(866)416-4404
For Chemical Emergency,Spill,Leak,Fire,Exposure,or Accident,call CHEMTREC—Day or Night
SECTIO A'D •
Classification of the Substance or Mixture
Classification(GHS-US)
Eye Irrit.2A H319
Label Elements
GHS-US Labeling
Hazard Pictograms(GHS-US)
i
f..
GH507
Signal Word(GHS-US) Warning
Hazard Statements(GHS-US) H319-Causes serious eye irritation.
Precautionary Statements(GHS-US) P264-Wash hands,forearms,and face thoroughly after handling.
P280-Wear eye protection,face protection,protective clothing,protective gloves.
P305+P351+P338-IF IN EYES:Rinse cautiously with water for several minutes. Remove
contact lenses,if present and easy to do.Continue rinsing.
P337+P313-If eye irritation persists:Get medical advice/attention.
Other Hazards
Other Hazards Not Contributing to the Classification: Exposure may aggravate those with pre-existing eye,skin,or respiratory
conditions.
Unknown Acute Toxicity(GHS-US) Not available
iSECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
Mixture
Name Product identifier %(w/w) Classification(GHS-US)
Water (CAS No)7732-18-5 40-70 Not classified
Date of Issue:05/03/15 EN(English US) SDSN CHE-60145 1/6
Exhibit "A"
Hyper+Ion® 1090
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Aluminum chloride,basic I (CAS No)1327-41-9 40-70 Eye Dam.1,H318
Full text of H-phrases:see section 16
*The specific chemical identity and/or exact percentage of composition have been withheld as a trade secret within the meaning of
the OSHA Hazard Communication Standard [29 CFR 1910.1200].
SECTIONAID MEASURES
Description of First Aid Measures
General:Never give anything by mouth to an unconscious person.If you feel unwell,seek medical advice(show the label if possible).
Inhalation:Remove to fresh air and keep at rest in a position comfortable for breathing.Obtain medical attention if breathing
difficulty persists.
Skin Contact: Remove contaminated clothing.Gently wash with plenty of soap and water followed by rinsing with water for at least
15 minutes.Call a POISON CENTER or doctor/physician if you feel unwell.Wash contaminated clothing before reuse.
Eye Contact: Rinse cautiously with water for several minutes.Remove contact lenses,if present and easy to do.Continue rinsing for
at least 60 minutes.Immediately call a POISON CENTER or doctor/physician.
Ingestion:Do NOT induce vomiting.Immediately call a POISON CENTER or doctor/physician.
Most Important Symptoms and Effects Both Acute and Delayed
General:Causes serious eye irritation.Causes skin irritation.May cause respiratory irritation.
Inhalation: May cause respiratory irritation.
Skin Contact:Causes skin irritation.
Eye Contact:Causes serious eye irritation.
Ingestion:Ingestion is likely to be harmful or have adverse effects.
Chronic Symptoms:None expected under normal conditions of use.
Indication of Any Immediate Medical Attention and Special Treatment Needed
If you feel unwell,seek medical advice(show the label where possible).
SECTION
Extinguishing Media
Suitable Extinguishing Media:Use extinguishing media appropriate for surrounding fire.
Unsuitable Extinguishing Media:Do not use a heavy water stream. Use of heavy stream of water may spread fire.
Special Hazards Arising From the Substance or Mixture
Fire Hazard:Not flammable.
Explosion Hazard:Product is not explosive.
Reactivity:Corrosive to metals.Contact with metals may evolve flammable hydrogen gas.
Advice for Firefighters
Precautionary Measures Fire:Exercise caution when fighting any chemical fire.
Firefighting Instructions:Use water spray or fog for cooling exposed containers.
Protection During Firefighting:Do not enter fire area without proper protective equipment,including respiratory protection.
Hazardous Combustion Products:Oxides of aluminum.
Reference to Other Sections
Refer to section 9 for flammability properties.
ISECTI• RELEASE
Personal Precautions,Protective Equipment and Emergency Procedures
General Measures:Avoid all contact with skin,eyes,or clothing. Avoid breathing(vapor,mist,spray).
For Non-Emergency Personnel
Protective Equipment:Use appropriate personal protection equipment(PPE).
Emergency Procedures:Evacuate unnecessary personnel.
For Emergency Personnel
Protective Equipment:Equip cleanup crew with proper protection.
Emergency Procedures:Stop leak if safe to do so.Ventilate area.
Environmental Precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
Date of Issue:05/03/15 EN(Exhibit "A" SDSH CHE-6014S 2/6
i
Hyper+Ion° 1090
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Methods and Material for Containment and Cleaning Up
For Containment:Collect spillage.
Methods for Cleaning Up:Absorb and/or contain spill with inert material,then place in suitable container.
Reference to Other Sections
See heading 8,Exposure Controls and Personal Protection.Concerning disposal elimination after cleaning,see item 13.
!SECTIONI I STORAGE
Precautions for Safe Handling
Hygiene Measures:Handle in accordance with good industrial hygiene and safety procedures.Wash hands and other exposed areas
with mild soap and water before eating,drinking or smoking and when leaving work.Use good housekeeping practices during
storage,transfer and handling.
Conditions for Safe Storage, Including Any Incompatibilities
Technical Measures:Comply with applicable regulations.
Storage Conditions:Store in a dry,cool and well-ventilated place.Keep container closed when not in use.Keep/Store away from
direct sunlight,extremely high or low temperatures and incompatible materials.
Incompatible Materials:Strong acids,strong bases,strong oxidizers.Non acid-proof metals.Galvanized surfaces.
Specific End Use(s)
Municipal and industrial water and wastewater treatment for the removal of turbidity,color,suspended solids and phosphorus.
Sludge compaction and volume reduction.Lagoon treatment.Oily wastewater clarification and dissolved air flotation.Emulsion
breaking.Paper machine pitch control.Retention and drainage aid,pitch control,and neutral size bonding agent for paper machines
operating in the pH range of 6.0 to 7.8.Point of application to the paper machine is critical in obtaining maximum benefit.This
product may be used on fourdrinier and cylinder machines,as well as twin wire formers.It is effective for a variety of paper and
board grades.
,SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Control Parameters
No Occupational Exposure Limits(OELs)have been established for this product or its chemical components.
Exposure Controls
Appropriate Engineering Controls:Ensure adequate ventilation,especially in confined areas. Emergency eye wash fountains and
safety showers should be available in the immediate vicinity of any potential exposure.Ensure all national/local regulations are
observed.
Personal Protective Equipment:Protective goggles.Gloves.Corrosionproof clothing.
Materials for Protective Clothing:Chemically resistant materials and fabrics.
Hand Protection:Wear chemically resistant protective gloves.Wear protective gloves made from PVC,neoprene,nitrile,vinyl,or
PVC/NBR.
Eye Protection:Chemical goggles or safety glasses.
Skin and Body Protection:Wear suitable protective clothing.
Respiratory Protection:Use NIOSH-approved air-purifying or supplied-air respirator where airborne concentrations of vapor or mist
are expected to exceed exposure limits.
Environmental Exposure Controls:Do not allow the product to be released into the environment.
Consumer Exposure Controls:Do not eat,drink or smoke during use
,SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Information on Basic Physical and Chemical Properties
Physical State Liquid
Appearance Colorless
Odor Not available
Odor Threshold Not available
pH 2.5-4.4
Melting Point Not applicable
Freezing Point -4°C(25°F)
Boiling Point Not available
Flash Point Not flammable
Date of Issue:05/03/15 EN( • • SDS#CHE-60145 3/6
Hyper+Ion° 1090
Safety Data Sheet
According to Federal Register/Vol.77,No.58/Monday,March 26,2012/Rules and Regulations
Auto-ignition Temperature Not applicable
Decomposition Temperature Not available
Flammability(solid,gas) Not applicable
Lower Flammable Limit Not applicable
Upper Flammable Limit Not applicable
Vapor Pressure Not available
Relative Vapor Density at 20°C Not available
Specific Gravity 1.30-1.36
Solubility 100%
Partition Coefficient:N-octanol/water Not available
Viscosity Not available
Explosion Data—Sensitivity to Mechanical Impact Not expected to present an explosion hazard due to mechanical impact.
Explosion Data—Sensitivity to Static Discharge Not expected to present an explosion hazard due to static discharge.
•N 10:STABILITY AND REACTIVITY
Reactivity: Corrosive to metals.Contact with metals may evolve flammable hydrogen gas.
Chemical Stability: Stable under recommended handling and storage conditions(see section 7).
Possibility of Hazardous Reactions: Hazardous polymerization will not occur.
Conditions to Avoid: Direct sunlight.Extremely high or low temperatures.Incompatible materials.
Incompatible Materials: Strong acids,strong bases,strong oxidizers.Non acid-proof metals.Galvanized surfaces.
Hazardous Decomposition Products: Hydrochloric acid fumes may be generated.
,SECTI•N 11:TOXICOLOGICAL INF• • •
Information on Toxicological Effects-Product
Acute Toxicity:Not classified
LD50 and LC50 Data:Not available
Skin Corrosion/Irritation:Not classified
pH:2.5-4.4
Serious Eye Damage/Irritation:Causes serious eye irritation.
pH:2.5-4.4
Respiratory or Skin Sensitization:Not classified
Germ Cell Mutagenicity:Not classified
Teratogenicity: Not classified
Carcinogenicity:Not classified
Specific Target Organ Toxicity(Repeated Exposure):Not classified
Reproductive Toxicity:Not classified
Specific Target Organ Toxicity(Single Exposure):Not classified
Aspiration Hazard:Not classified
Symptoms/Injuries After Inhalation:May cause respiratory irritation.
Symptoms/Injuries After Skin Contact:Causes skin irritation.
Symptoms/Injuries After Eye Contact:Causes serious eye damage.
Symptoms/Injuries After Ingestion:Ingestion is likely to be harmful or have adverse effects.
Chronic Symptoms:None expected under normal conditions of use.
Information on Toxicological Effects-Ingredient(s)
LD50 and LC50 Data:
Aluminum chloride,basic(1327-41-9)
LD50 Oral Rat >2000 mg/kg
LD50 Dermal Rat >2000 mg/kg
Water(7732-18-5)
LD50 Oral Rat >90000 mg/kg
Date of Issue:05/03/15 EN(E i 5 • • SDSH CHE-60145 4/6
i
' Hyper+Ion® 1090
Safety Data Sheet
According to Federal Register/Vol.77,No.581 Monday,March 26,2012/Rules and Regulations
SECTION • • • ' •
Toxicity Not classified
I Persistence and Degradability Not available
1 Bioaccumulative Potential Not available
i Mobility in Soil Not available
Other Adverse Effects Not available
SECTION •• CONSIDERATIONS
Waste Disposal Recommendations:Dispose of waste material In accordance with all local,regional,national,provincial,territorial
and international regulations.
Ecology—Waste Materials:Avoid release to the environment.
,SECTION • • • • • •
14.1 In Accordance with DOT Not regulated for transport
14.2 In Accordance with IMDG Not regulated for transport
14.3 In Accordance with IATA Not regulated for transport
14.4 In Accordance with TDG Not regulated for transport
SECTION • • • • •
US Federal Regulations
Hyper+Ion®1090
SARA Section 311/312 Hazard Classes TImmediate(acute)health hazard
Aluminum chloride,basic(1327-41-9)
Listed on the United States TSCA(Toxic Substances Control Act)inventory
Water(7732-18-5)
Listed on the United States TSCA(Toxic Substances Control Listed on the United States TSCA(Toxic Substances Control Act)
Act)inventory [inventory
US State Regulations
Neither this product nor its chemical components appear on any US state lists.
Canadian Regulations
Hyper+Ion°1090
WHMIS Classification Uncontrolled product according to WHMIS classification criteria
Aluminum chloride,basic(1327-41-9)
Listed on the Canadian DSL(Domestic Sustances List)
WHMIS Classification Class E-Corrosive Material
Water(7732-18-5)
Listed on the Canadian DSL(Domestic Substances List)
WHMIS Classification Uncontrolled product according to WHMIS classification criteria
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations(CPR)and the SDS
contains all of the information required by CPR.
SECTION 1-6:-OT-H-ER INFORMATION, INCLUDING DATE OF PREPARATION OR LAST REVISION
Revision date 05/03/15
Other Information This document has been prepared in accordance with the SDS requirements of the OSHA
Hazard Communication Standard 29 CFR 1910.1200.
GHS Full Text Phrases:
Eye Dam.1 Serious eye damage/eye irritation Category 1
Eye Irrit.2A Serious eye damage/eye irritation Category 2A
H318 Causes serious eye damage
H319 Causes serious eye irritation
Party Responsible for the Preparation of This Document
Date of Issue:05/03/15 EN(E • • SDSH CHE-60145 5/6
Hyper+lon® 1090
Safety Data Sheet
According to Federal Register/Vol.77,No.S8/Monday,March 26,2012/Rules and Regulations
CHEMTRADE LOGISTICS,INC.
For SDS Info:(416)496-5856
Handle product with due care and avoid unnecessary contact.This information is supplied under U.S.OSHA'S"Right to Know"(29 CFR
1910.1200)and Canada's WHMIS regulations.Although certain hazards are described herein, we cannot guarantee these are the only
hazards that exist.The information contained herein is based on data available to us and is believed to be true and accurate but it is
not offered as a product specification.No warranty,expressed or implied,regarding the accuracy of this data,the hazards connected
with the use of the product,or the results to be obtained from the use thereof,is made and Chemtrade and its affiliates assume no
responsibility. Chemtrade is a member of the CIAC(Chemistry Industry Association of Canada)and adheres to the codes and principles
of Responsible CareTm
Responsible Care" ` Gestion responsablew
4rlor ftw4hsntrollfr I Istres,et[+ertuaeskinc'aYW¢+wfesLe.
Chemtrade North Amedw SDS Template
Date of Issue:05/03/15 m( 's SDS#CHE-60145 6/6
Listing Category Search Page I NSF International Page 1 of 9
The Public Health and Safety Organization
NSF Product and Service Listings
These NSF Official Listings are current as of Monday,August 29,2016 at 12:15 a.m.Eastern Time.Please contact NSF
International to confirm the status of any Listing,report errors,or make suggestions.
Alert:NSF is concerned about fraudulent downloading and manipulation of website text.Always confirm this
information by clicking on the below link for the most accurate information:
httQ//info nsf org/Certified/PwsChemicals/Listings asp?CompanyName=chemtrade&PlantState=Texas+TX&
NSF/ANSI 6o
Drinking Water Treatment Chemicals - Health Effects
Chemtrade Logistics, Inc.
155 Gordon Baker Road
Suite 300
Toronto,ON M2H 3N5
Canada
416-496-4113
Visit this compapy's website
(htW://,Aww.chemtradelogistics.com)
Facility:Beaumont,TX
Sodium Bisulfite[i]
7)radeDesignation ProductFunetion Max Use
Sodium Bisulfite Dechlorinator&Antioxidant 5omg/L
(1] This product contains sulfite.
Sulfites have been known to cause potentially lethal
allergic reactions in sulfite-sensitive individuals.
The maximum recommended allowable
residual sulfite level in the finished drinking water is 100 ppb (0.1 mg/L) .
Sulfuric Acid
73^adeDesignation Product Function Max Use
93%Sulfuric Acid pH Adjustment 5omg/L
98%Sulfuric Acid pH Adjustment 5omg/L
99°6 Sulfuric Acid Exhi 'Jusii`ent it 5omg/L
.nsf.or /Certified/PwsChemicals/Listin s.as ?Com an Name=chemtrade&Trad... 8/29/2016
http://Info g g p P y
Listing Categoly Search Page I NSF International Page 2 of 9
i
Chemtrade Solutions LLC (formerly
General Chemical LLC)
1421 Willis Avenue
Syracuse,NY 13204
United States
315-478-2323
Visit this compands website
(htti)://ivww.chemtradeloxMcs.com/main/)
Facility:Celina,TX
Ammonium Sulfate
Trade Designation Product Function Max Use
Ammonium Sulfate Solution Chloramination 4omg/L
Liquid Ammonium Sulfate Chloramination 4omg/L
Ferric Sulfate
Trade Designation Product Function Max Use
6o%LFS Coagulation&Flocculation 600mg/L
Fe3 Coagulation&Flocculation 600mg/L
Fer+Ion®Flo Coagulation&Flocculation 488mg/L
Fer+Ion®F15 Coagulation&Flocculation 336mg/L
Fer+Ion®Flo Coagulation&Flocculation 256mg/L
Fer+Ion®F3 Coagulation&Flocculation 612mg/L
Fer+Ion®F5 Coagulation&Flocculation 62omg/L
Fer+Ion®F7 Coagulation&Flocculation 674mg/L
Ferric Sulfate 50% Coagulation&Flocculation 600m0l.
Ferric Sulfate 55% Coagulation&Flocculation .600mg/L
Ferric Sulfate 6o% Coagulation&Flocculation 600mg/L
Ferric Sulfate Solution Coagulation&Flocculation 600mg/L
Liquid Ferric Sulfate Coagulation&Flocculation 600mg/L
Polymer Blends
Trade Designation Product Function Max Use
Fer+Ion®202.5 Coagulation&Flocculation 25omg/L
Fer+Ion®205 Coagulation&Flocculation 25omg/L
Fer+Ion®2050 Coagulation&Flocculation 417mg/L
Fer+Ion®2055 Coagulation&Flocculation 417mg/L
Fer+Ion®210 Coagulation&Flocculation 25omg/L
Fer+Ion®2100 Coagulation&Flocculation 227mg/L
Fer+Ion®2105 Coagulation&Flocculation 227mg/L
Fer+Ion®215 Coagulation&Flocculation 166mg/I,
Fer+Ion®302.5[PY] Coagulation&Flocculation 25omg/L
Fer+Ion®3051PYI I ' l l c�tiai I 25omg/L
http://info.nsf.org/Certified/PwsChemicals/Listings.asp?CompanyName=chemtrade&Trad... 8/29/2016
Listing Category Search Page I NSF International Page 3 of 9
i
I
Fer+Ion®3050[PY] Coagulation&Flocculation 40omg/L
Fer+Ion®3055[PY] Coagulation&Flocculation 40omg/L
Fer+Ion®310[PY] Coagulation&Flocculation 2oomg/L
Fer+Ion®3100[PY] Coagulation&Flocculation 20omg/L
Fer+Ion®3105[PY] Coagulation&Flocculation 2oomg/L
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
Facility: Odem,TX
Aluminum Chlorohydrate[AL][CP]
Trade Designation ProductFunction Max Use
Gen+Pac®2370 Coagulation&Flocculation 25omg/L
Hyper+Ion®logo Coagulation&Flocculation 25omg/L
Hyper+Ion®92005 Coagulation&Flocculation 25omg/L
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[CP] The finished drinking water shall be monitored to ensure that levels of copper do
not exceed 1.3 mg/L.
Aluminum Sulfate[AL]
Trade Designation Product Function Max Use
Alum Coagulation&Flocculation 40omg/L
Aluminum Sulfate Coagulation&Flocculation 40omg/L
Clar+Ion®93411CP][PO] Coagulation&Flocculation 40omg/L
Clar+Ion®CS[CP] Coagulation&Flocculation iiomg/L
Clar+Ion®CS12[CP] Coagulation&Flocculation iiomg/L
Clar+Ion®CS4[CP] Coagulation&Flocculation 40omg/L
Clar+Ion®CS8[CP] Coagulation&Flocculation 2oomg/L
Liquid Alum Coagulation&Flocculation 40omg/L
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[CP] The finished drinking water shall be monitored to ensure that levels of copper do
not exceed 1.3 mg/L.
[PO] The finished drinking water shall be monitored to ensure that levels of manganese
do not exceed 0.05 mg/L.
Exhibit "A"
http://info.nsf.org/Certified/PwsChemicals/Listings.asp?CompanyName=chemtrade&Trad... 8/29/2016
Listing Category Search Page NSF International Page 4 of 9
Ammonium Sulfate
Trade Designation Product Function Max Use
Ammonium Sulfate Solution Chloramination 4omg/L
Liquid Ammonium Sulfate Chloramination 4omg/L
Blended Phosphates
Trade Designation Product Function Max Use
Genhib 1881 Corrosion&Scale Control 25mg/L
Sequestering
Genhib 1883 Corrosion&Scale Control 25mg/L
Sequestering
Genhib 1885 Corrosion&Scale Control 25mg/L
Sequestering
CitricAcid[i]
Trade Designation ProduetFunction Max Use
Citric Acid Solution Membrane Cleaner NA
GencIean 704 Membrane Cleaner NA
Liquid Citric Acid Membrane Cleaner NA
[1] This product is designed to be used off-line and flushed out prior to using the system
for drinking water, following manufacturer's use instructions.
Copper Sulfate[CP]
Trade Designation Product Function Max Use
Aqua-Ox 446[PO] Algicide 16mg/L
Copper Sulfate Solution Algicide 16mg/L
Liquid Copper Sulfate 25% Algicide 16mg/L
[CP] The finished drinking water shall be monitored to ensure that levels of copper do
not exceed 1.3 mg/L.
[PO] The finished drinking water shall be monitored to ensure that levels of manganese
do not exceed 0.05 mg/L.
Poly(Diallyldimethylammonium Chloride)(pDADMAC)
Trade Designation ProductFunction Max Use
Clar+Ion®P825 Coagulation&Flocculation 5omg/L
Clar+Ion®P830 Coagulation&Flocculation 5omg/L
Clar+Ion®P846 Coagulation&Flocculation 5omg/L
CIar+Ion®P850 Coagulation&Flocculation 5omg/L
CIar+Ion®P855 Coagulation&Flocculation 5omg/L
Clar+Ion®Pg16o Coagulation&Flocculation 32mg/L
Clar+Ion®P9161 ExhI%i 4XIIculation 32mg/L
http://info.nsf.org/Certified/PwsChemicals/Listings.asp?CompanyName=chemtrade&Trad... 8/29/2016
Listing Category Search Page NSF International Page 5 of 9
i
i
I Clar+Ion®P917 Coagulation&Flocculation 25mg/L
Polyacrylamide[PC]
Trade Designation Product Function Max Use
Hyper+Lyte 30 Coagulation&Flocculation 3.5mg/L
[PC] Polyacrylamide Products Certified by NSF International comply with 40 CFR 141.111
requirements for percent monomer and dose.
Polyaluminum ebloride[AL][CP]
7yadeDesignation Product Function Max Use
Gen+Pac®2370 Coagulation&Flocculation 25omg/L
Hyper+Ion®1090 Coagulation&Flocculation 250mg/L
Hyper+Ion®92005 Coagulation&Flocculation 25omg/L
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[CPl The finished drinking water shall be monitored to ensure that levels of copper do
not exceed 1.3 mg/L.
Polymer Blends
Trade Designation ProductFunetion Max Use
Clar+Ion A403P[AL][PY] Coagulation&Flocculation 40omg/L
Clar+Ion®9ioo[AL][CP] Coagulation&Flocculation 40omg/L
Clar+Ion®91oo8[AL][CP] Coagulation&Flocculation 20omg/L
Clar+Ion®91012[AL][CP] Coagulation&Flocculation 40omg/L
Clar+Ion®91014[AL][CP] Coagulation&Flocculation 40omg/L
Clar+Ion®91o18[AL][CP] Coagulation&Flocculation 2oomg/L
Clar+Ion®91024[AL][CP] Coagulation&Flocculation 40omg/L
Clar+Ion®910312[AL][CP] Coagulation&Flocculation llomg/L
Clar+Ion®91034[AL][CP] Coagulation&Flocculation 40omg/L
Clar+Ion®91042[AL][CP] Coagulation&Flocculation 40omg/L
Clar+Ion®91044[AL][CP] Coagulation&Flocculation 40omg/L
Clar+Ion®91048[AL][CP] Coagulation&Flocculation 20omg/L
Clar+Ion®91054[AL][CP] Coagulation&Flocculation 40omg/L
Clar+Ion®911o8[A1][CP] Coagulation&Flocculation 20omg/L
Clar+Ion®91212[AL][CP] Coagulation&Flocculation 40omg/L
Clar+Ion®91214[AL][CP] Coagulation&Flocculation 40omg/L
Clar+Ion®914112[AL][CP] Coagulation&Flocculation 11omg/L
Clar+Ion®91414[AL][CP] Coagulation&Flocculation 40omg/L
Clar+Ion®91734[AL][CP] Coagulation&Flocculation 40omg/L
Clar+Ion®A402H[AL][PY] Coagulation&Flocculation 40omg/L
Clar+Ion®A403H[AL][PY] Coagulation&Flocculation 40omg/L
Clar+Ion®A4041[AL][PY] Coagulation&Flocculation 40omg/L
Clar+Ion®A4041M[AL][PY] Coagulation&Flocculation 40omg/L
Exhibit "A"
http://info.nsf org/Certified/PwsChemicals/Listings.asp?CompanyName=chemtrade&Trad... 8/29/2016
Listing Category Search Page NSF International Page 6 of 9
Clar+Ion®A4ioP[AL] Coagulation&Flocculation 25omg/L
Clar+Ion®A412P[AL] Coagulation&Flocculation 208mg/L
Clar+Ion®A4522[AL][PY] Coagulation&Flocculation 40omg/L
Clar+Ion®P95o[PY] Coagulation&Flocculation 4omg/L
Clar+Ion®P951[PY] Coagulation&Flocculation 4omg/L
Hyper+Ion®92300[AL][PY] Coagulation&Flocculation i5omg/L
Hyper+Ion®92303[AL][CP] Coagulation&Flocculation 3oomg/L
Hyper+Ion®9233[AL][PY] Coagulation&Flocculation 150mg/L
Hyper+Ion®92412[AL][CP] Coagulation&Flocculation 3oomg/L
Hyper+Ion®92413[AL][CP] Coagulation&Flocculation 3oomg/L
Hyper+Ion®92414[AL][CP] Coagulation&Flocculation 3oomg/L
Hyper+Ion®92415[AL][CP] Coagulation&Flocculation 30omg/L
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[CP] The finished drinking water shall be monitored to ensure that levels of copper do
not exceed 1.3 mg/L.
[PY] Polyamines Certified by NSF International comply With 40 CFR 141.111 requirements for
percent monomer and dose.
Sodium Hydroxide
Trade Designation Product Function Max Use
Caustic Soda 20-30% Corrosion&Scale Control 167mg/L
pH Adjustment
Caustic Soda 50% Corrosion&Scale Control loomg/L
pH Adjustment
Sodium Polyphosphates,Glassy
Trade Designation Product Function Max Use
Genhib 190 Corrosion Control 25mg/L
Liquid SHMP Corrosion Control 25mg/L
Liquid Sodium Hexametaphosphate Corrosion Control 25mg/L
Sodium Hexametaphosphate Corrosion Control 25mg/L
Zinc Orthophosphate[ZN]
Trade Designation ProductFunction Max Use
Genhib 185 Corrosion Control 12mg/L
Zinc Orthophosphate Corrosion Control 12mg/L
[ZN] Based on an evaluation of health effects data, the level of zinc in the finished
drinking water shall not exceed 2.0 mg/L.
Facility:Terrell,TX
Exhibit "A"
http://info.nsf.org/Certified/PwsChemicalsAListings.asp?CompanyName=chemtrade&Trad... 8/29/2016
Listing Category Search Page NSF International Page 7 of 9
Aluminum Chlorohydrate[AL]
Trade Designation Product Function Drax Use
EC-409 Coagulation&Flocculation 25omg/L
Gen+Pac®2370 Coagulation&Flocculation 25omg/L
Hyper+Ion®1030 Coagulation&Flocculation 25omg/L
Hyper+Ion®io6o Coagulation&Flocculation 25omg/L
Hyper+Ion®1ogo Coagulation&Flocculation 25omg/L
Hyper+Ion®2662 Coagulation&Flocculation 25omg/L
Hyper+Ion®2767 Coagulation&Flocculation 25omg/L
Hyper+Ion®4393 Coagulation&Flocculation 25omg/L
Hyper+Ion®5523 Coagulation&Flocculation 25omg/L
Hyper+Ion®5848 Coagulation&Flocculation 25omg/L
Hyper+Ion®5969 Coagulation&Flocculation 25omg/L
Hyper+Ion®6311 Coagulation&Flocculation 25omg/L
Hyper+Ion®6791 Coagulation&Flocculation 25omg/L
Hyper+Ion®700 Coagulation&Flocculation 25omg/L
Hyper+Ion®7136 Coagulation&Flocculation 25omg/L
Hyper+Ion®8551 Coagulation&Flocculation 25omg/L
Hyper+Ion®8673 Coagulation&Flocculation 25omg/L
Hyper+Ion®8962 Coagulation&Flocculation 25omg/L
Hyper+Ion®9213 Coagulation&Flocculation 25omg/L
PAC®2370 Coagulation&Flocculation 25omg/L
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
Aluminum Sulfate[AL]
Trade Designation Product Function Max Use
Alum Coagulation&Flocculation 40omg/L
Aluminum Sulfate Coagulation&Flocculation 40omg/L
Clar+Ion®CS[CP] Algicide 11omg/L
Coagulation&Flocculation
Clar+Ion®CS4[CP] Algicide 40omg/L
Coagulation&Flocculation
Liquid Alum Coagulation&Flocculation 40omg/L
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[CP] The finished drinking water shall be monitored to ensure that levels of copper do
not exceed 1.3 mg/L.
Polyaluminum Chloride[AL]
Trade Designation PrroodductFuunctionn Max Use
EC-409 C ialll l l c �f t/ 25omg/L
I
http://info.nsf.org/Certified/PwsChemicals/Listings.asp?CompanyName=chemtrade&Trad... 8/29/2016
Listing Category Search Page NSF International Page 9 of 9
Hyper+Ion®4616 Coagulation&Flocculation 250mg/L
Hyper+Ion®4948 Coagulation&Flocculation 250mg/L
Hyper+Ion®5244 Coagulation&Flocculation 250mg/L
Hyper+Ion®5632 Coagulation&Flocculation 25omg/L
Hyper+Ion®6121 Coagulation&Flocculation 25omg/L
Hyper+Ion®6865 Coagulation&Flocculation 25omg/L
Hyper+Ton®701 Coagulation&Flocculation 25omg/L
Hyper+Ion®702 Coagulation&Flocculation 25omg/L
Hyper+Ion®705 Coagulation&Flocculation 25omg/L
Hyper+Ion®710 Coagulation&Flocculation 20omg/L
Hyper+Ion®720 Coagulation&Flocculation loomg/L
Hyper+Ion®7244 Coagulation&Flocculation 250mg/L
Hyper+Ion®725D Coagulation&Flocculation 87mg/L
Hyper+Ion®7287 Coagulation&Flocculation 25omg/L
Hyper+Ion®735 Coagulation&Flocculation 57mg/L
Hyper+Ion®7420 Coagulation&Flocculation 250mg/L
Hyper+Ion®7793 Coagulation&Flocculation 25omg/L
Hyper+Ion®7918 Coagulation&Flocculation 25omg/L
Hyper+Ion®802 Coagulation&Flocculation 25omg/L
Hyper+Ion®805 Coagulation&Flocculation 25omg/L
Hyper+Ion®810 Coagulation&Flocculation 25omg/L
Hyper+Ion®8135 Coagulation&Flocculation 250mg/L
Hyper+Ion®835 Coagulation&Flocculation 7img/L
Hyper+Ion®8364 Coagulation&Flocculation 25omg/L
Hyper+Ion®8518 Coagulation&Flocculation 25omg/L
Hyper+Ion®9291 Coagulation&Flocculation 25omg/L
Hyper+Ion®9369 Coagulation&Flocculation 25omg/L
[AL] Based on an evaluation of health effects data, the level of aluminum in the finished
drinking water shall not exceed 2 mg/L.
[PY] Polyamines Certified by NSF International comply with 40 CFR 141.111 requirements for
percent monomer and dose.
Number of matching Manufacturers is 2
Number of matching Products is 2o6
Processing time was o seconds
Exhibit "A"
http://info.nsf.org/Certified/PwsChemicals/Li stings.asp?CompanyName=chemtrade&Trad... 8/29/2016
CERTIFICATE OF INTERESTED PARTIES
FORM 1295
lofl
Complete Nos.1-4 and 6 if there are interested parties. OFFICE USE ONLY
Complete Nos.1,2,3,5,and 6 if there are no interested parties. CERTIFICATION OF FILING
1 Name of business entity filing form,and the city,state and country of the business entity's place Certificate Number:
of business. 2016-148153
Chemtrade Chemicals US LLC
Parsippany,NJ United States Date Filed:
2 Name of governmental entity or state agency that is a party to the contract for which the form is 1212012016
being filed.
CITY OF ROUND ROCK Date Acknowledged:
3 Provide the identification number used by the governmental entity or state agency to track or identify the contract,and provide a
description of the services,goods,or other property to be provided under the contract.
16-013
Water Treatment Chemicals-Alum
Nature of interest
4
Name of Interested Party City,State,Country(place of business) (check applicable)
Controlling I Intermediary
5 Check only if there is NO Interested Party. a
X
6 AFFIDAVIT I swear,or affirm,under penalty of perjury,that the above disclosure is true and correct.
S gnature of authorized age t of contracting business entity
AFFIX NOTARY STAMP/SEAL ABOVE l
Sworn to and subscribed before me,by the said �� 4,4 C,7m- A1,41)0 this the 5 day
20_�,to certify which,witness my hand and seal of office.
Mary F Culvor
Notary Publio
New Jersey
121
Signature officer administering oath Printed name of officer administering oath Title of officer administering oath
Forms provided by Texas Ethics Commission wvrw.ethics.state.tx.us Version V1.0.277
CERTIFICATE OF INTERESTED PARTIES
FORM 1295
10f1
7-7
Complete Nos.1-4 and 6 if there are interested parties. OFFICE USE ONLY
Complete Nos.1,2,3,5,and 6 if there are no interested parties. CERTIFICATION OF FILING
1 Name of business entity filing form,and the city,state and country of the business entity's place Certificate Number:
of business. 2016-148153
Chemtrade Chemicals US LLC
Parsippany, NJ United States Date Filed:
2 Name of governmental entity or state agency that is a party to the contract for which the form is 12/20/2016
being filed.
CITY OF ROUND ROCK Date Acknowledged:
01/10/2017
3 Provide the identification number used by the governmental entity or state agency to track or identify the contract,and provide a
description of the services,goods,or other property to be provided under the contract.
16-013
Water Treatment Chemicals-Alum
Nature of interest
4
Name of Interested Party City,State,Country(place of business) (check applicable)
Controlling I Intermediary
5 Check only if there is NO Interested Party. ❑
X
6 AFFIDAVIT I swear,or affirm,under penalty of perjury,that the above disclosure is true and correct.
Signature of authorized agent of contracting business entity
AFFIX NOTARY STAMP/SEAL ABOVE
Sworn to and subscribed before me,by the said this the day of
20 ,to certify which,witness my hand and seal of office.
Signature of officer administering oath Printed name of officer administering oath Title of officer administering oath
Forms provided by Texas Ethics Commission www.ethics.state.tx.us Version V1.0.277